[U-Boot] UPDATED: pull request: u-boot-arm/master

[Tom Rini]

On Fri, Jul 12, 2013 at 02:12:20PM +0200, Albert ARIBAUD wrote:

> Hello Tom,
> 
> Update to my previous PR, to include the last Tegra and IMX PRs:
> 
> The following changes since commit
> fbf87b1823dd5ebc2a384711ea2c677543019ece:
> 
>   arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-arm master
> 
> for you to fetch changes up to efc284e32503b240dbd35c6e8b8d098d702b4be7:
> 
>   Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-07-12
>   13:20:35 +0200)
> 
> ----------------------------------------------------------------
> 
> Ajay Kumar (1):
>       video: exynos_fb: Add the missing #else clause
> 
> Albert ARIBAUD (3):
>       Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> 
> Amar (2):
>       EXYNOS5: I2C: Add FDT and non-FDT support for I2C
>       EXYNOS: Resolve the i2c compilation error
> 
> Axel Lin (3):
>       gpio: s3c2440_gpio: Fix wrong writel arguments
>       gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
>       ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on
> OMAP5
> 
> Bernie Thompson (1):
>       exynos: Adjust the starting MIF voltage to 1.05v
> 
> Dirk Behme (2):
>       spi: mxc_spi: Fix pre and post divider calculation
>       spi: mxc_spi: Update pre and post divider algorithm
> 
> Eric Nelson (1):
>       dwc_ahsata: Allow use with dcache enabled
> 
> Fabio Estevam (8):
>       README: mx28_common: Keep the text within 80 columns
>       README: mx28_common: Do not hardcode the SSP port
>       README: mx28_common: Fix structure of sentence
>       README: mxs: Introduce README.mxs
>       mx28evk: Move README file inside board directory
>       m28evk: Move README file inside board directory
>       MAINTAINERS: Add an entry to the mx6q wandboard variant
>       video: mxsfb: Break the line in videomode message
> 
> Ilya Ledvich (1):
>       am33xx: fix the ddr_cmdtctrl structure
> 
> Jim Lin (3):
>       ARM: Tegra: FDT: Add USB EHCI function for T30/T114
>       ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
>       Tegra: Config: Enable Tegra30/Tegra114 USB function
> 
> Lokesh Vutla (1):
>       ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
> 
> Marek Vasut (3):
>       m28evk: add trimffs to nand command
>       net: fec: Remove bogus flush_dcache_range() call
>       net: fec: Avoid MX28 bus sync issue
> 
> Michael Trimarchi (1):
>       usb: omap: ulpi: fix ulpi transceiver access
> 
> Mike Dunn (5):
>       pxa: add support for palmtreo680 board
>       pxa: palmtreo680 flash programming utility
>       pxa: turn icache off in cpu_init_crit()
>       pxa: use -mcpu=xscale compiler option
>       pxa: fix memory coherency problem after relocation
> 
> Minkyu Kang (1):
>       arm: exynos: fix clock calculation
> 
> Otavio Salvador (8):
>       vf610twr: Add default environment in line with other Freescale
> boards vf610twr: Remove SoC name from U-Boot prompt
>       mx53loco: Change default environment to cope with OE changes
>       mx6qsabrelite: Change default environment to cope with OE changes
>       mx6slevk: Change default environment to cope with OE changes
>       wandboard: Change default environment to cope with OE changes
>       mx51evk: Change default environment to cope with OE changes
>       mx53ard: Change default environment to cope with OE changes
> 
> Pierre Aubert (3):
>       imx6: fix GPR2 wrong definition
>       imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
>       imx: Add support for the SabreSD shipped with i.MX6DL
> 
> Rajeshwari Shinde (9):
>       EXYNOS5: FDT: Add compatible strings for Serial
>       EXYNOS5: FDT: Add serial device node values
>       S5P: Serial: Add fdt support to driver
>       CONFIG: EXYNOS5: Enable silent console
>       SMDK5250: Remove reduntant code
>       EXYNOS: Add API for power reset and exit wakeup
>       EXYNOS: LDS file move to common
>       EXYNOS4210: Configure GPIO for uart
>       EXYNOS: Move files from board/samsung to arch/arm
> 
> Robert Winkler (4):
>       imx: nitrogen6x: Enabled data cache
>       imx: nitrogen6x: Enable bootz
>       imx: nitrogen6x: Enable raw initrd
>       imx: nitrogen6x: Enable filesystem generic commands
> 
> Simon Glass (1):
>       exynos: Enable mmc for snow
> 
> Stephen Warren (2):
>       ARM: tegra: enable LCD panel on Harmony
>       ARM: tegra: enable LCD panel on Ventana
> 
> Tapani Utriainen (1):
>       Add support for Wandboard Quad
> 
> trem (2):
>       mx27: add function enable_caches
>       mx27: add i2c clock
> 
> ??ukasz Majewski (2):
>       arm:trats: Increase malloc pool size (for DFU ext4 transfers)
>       power:bat:trats: Break battery charging with ctrl+C

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130712/e1e1a6ae/attachment.pgp>