[U-Boot] [PATCH] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x

Stefano Babic sbabic at denx.de
Mon Jul 15 09:14:06 CEST 2013


Hi Fabio,

On 15/07/2013 04:40, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the
> code duplication and only use the nitrogen6x source code to make board code
> maintainance easier.
> 
> Tested booting a mainline device tree kernel on a mx6qsabrelite board.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  .../nitrogen6x/README.mx6qsabrelite}               |   0
>  .../nitrogen6x/{README => README.nitrogen6x}       |   0
>  board/freescale/mx6qsabrelite/Makefile             |  41 -
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c      | 848 ---------------------
>  boards.cfg                                         |   2 +-
>  include/configs/mx6qsabrelite.h                    | 297 --------
>  include/configs/nitrogen6x.h                       |  80 +-

Should we update the MAINTAINERS, too ? It is weird that we have two
maintainers for the same code.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list