[U-Boot] [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL
ying.zhang at freescale.com
ying.zhang at freescale.com
Mon Jul 15 11:36:29 CEST 2013
From: Ying Zhang <b40530 at freescale.com>
Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can
not be more than 4K. So, the SPL cannot initialize the DDR with the SPD
code. This patch introduces TPL to enable a loader stub that is loaded
by the code from the SPL. It initializes the DDR with the SPD or other
operations.
The TPL's size is sizeable, the maximum size is decided by the memory's
size that TPL runs. It initializes the DDR through SPD code, and copys
final uboot image to DDR. So there are three stage uboot images:
* spl_boot, * tpl_boot, * final uboot image
This patch is on top of the patch:
SPL: Makefile: Build a separate autoconf.mk for SPL
Signed-off-by: Ying Zhang <b40530 at freescale.com>
---
Change from v7:
- Modify the doc/README.TPL
- Modify the spl/Makefile.
Change from v6:
- Modify the description of the patch.
- Add the separate the autoconf.mk for TPL.
- Delete the file tpl/Makefile and the directory tpl.
- Reuse the spl/Makefie in TPL.
Change from v5:
- Use ifdef to define "nand_load_image" to non-static for non-SPL.
Change from v4:
- No change.
Change from v3:
- No change.
Change from v2:
- No change.
Change from v1:
- Split from "powerpc/p1022ds: nand: introduce the TPL based on the SPL".
Makefile | 44 +++++++++++++++++++++---
README | 9 +++++
config.mk | 17 +++++++++
doc/README.TPL | 71 +++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsl_elbc_spl.c | 5 ++-
include/nand.h | 3 ++
spl/Makefile | 25 +++++++++++---
8 files changed, 164 insertions(+), 11 deletions(-)
create mode 100644 doc/README.TPL
diff --git a/Makefile b/Makefile
index 64e0ea1..b5c1538 100644
--- a/Makefile
+++ b/Makefile
@@ -413,6 +413,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_TPL) += $(obj)spl/u-boot-tpl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
ifneq ($(CONFIG_SPL_TARGET),)
ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
@@ -492,12 +493,25 @@ $(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-
+ifdef CONFIG_TPL
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-tpl.bin \
+ $(obj)u-boot.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+ -I binary -O binary \
+ $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl-pad.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+ -I binary -O binary \
+ $(obj)spl/u-boot-tpl.bin $(obj)spl/u-boot-tpl-pad.bin
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)spl/u-boot-tpl-pad.bin \
+ $(obj)u-boot.bin > $@
+ rm $(obj)spl/u-boot-spl-pad.bin $(obj)spl/u-boot-tpl-pad.bin
+else
$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
+endif
$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
@@ -621,7 +635,12 @@ $(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend
- $(MAKE) -C spl all
+ $(MAKE) -C spl clean
+ $(MAKE) -C spl all CONFIG_SPL_BUILD=y
+
+$(obj)spl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend
+ $(MAKE) -C spl clean
+ $(MAKE) -C spl all CONFIG_TPL_BUILD=y CONFIG_SPL_BUILD=y
updater:
$(MAKE) -C tools/updater all
@@ -630,6 +649,7 @@ updater:
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
$(obj)include/spl-autoconf.mk \
+ $(obj)include/tpl-autoconf.mk \
$(obj)include/autoconf.mk \
$(obj)include/generated/generic-asm-offsets.h \
$(obj)include/generated/asm-offsets.h
@@ -704,8 +724,16 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
mv $@.tmp $@
-
# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL)
+$(obj)include/tpl-autoconf.mk: $(obj)include/config.h
+ @$(XECHO) Generating $@ ; \
+ set -e ; \
+ : Extract the config macros ; \
+ $(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD -DCONFIG_SPL_BUILD\
+ -DDO_DEPS_ONLY -dM include/common.h | \
+ sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+ mv $@.tmp $@
+
$(obj)include/spl-autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
set -e ; \
@@ -716,12 +744,14 @@ $(obj)include/spl-autoconf.mk: $(obj)include/config.h
$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \
$(obj)include/spl-autoconf.mk \
+ $(obj)include/tpl-autoconf.mk \
$(obj)lib/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
$(obj)include/spl-autoconf.mk \
+ $(obj)include/tpl-autoconf.mk \
$(src)lib/asm-offsets.c
@mkdir -p $(obj)lib
$(CC) -DDO_DEPS_ONLY \
@@ -730,12 +760,14 @@ $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
$(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \
$(obj)include/spl-autoconf.mk \
+ $(obj)include/tpl-autoconf.mk \
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk
+ $(obj)include/spl-autoconf.mk \
+ $(obj)include/tpl-autoconf.mk
@mkdir -p $(obj)$(CPUDIR)/$(SOC)
if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
$(CC) -DDO_DEPS_ONLY \
@@ -808,7 +840,8 @@ unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk
+ $(obj)include/spl-autoconf.mk \
+ $(obj)include/tpl-autoconf.mk
%_config:: unconfig
@$(MKCONFIG) -A $(@:_config=)
@@ -894,6 +927,7 @@ clobber: tidy
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
@rm -f $(obj)spl/u-boot-spl.lds
+ @rm -f $(obj)spl/{u-boot-tpl,u-boot-tpl.bin,u-boot-tpl.map}
@rm -f $(obj)MLO MLO.byteswap
@rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
diff --git a/README b/README
index a44d96a..7ab10e7 100644
--- a/README
+++ b/README
@@ -3092,6 +3092,10 @@ FIT uImage format:
option to re-enable it. This will affect the output of the
bootm command when booting a FIT image.
+- TPL framework
+ CONFIG_TPL
+ Enable building of TPL globally.
+
Modem Support:
--------------
@@ -4129,6 +4133,11 @@ Low Level (hardware related) configuration options:
that is executed before the actual U-Boot. E.g. when
compiling a NAND SPL.
+- CONFIG_TPL_BUILD
+ Modifies the behaviour of start.S when compiling a loader
+ that is executed after the SPL and before the actual U-Boot.
+ It is loaded by the SPL.
+
- CONFIG_SYS_MPC85XX_NO_RESETVEC
Only for 85xx systems. If this variable is specified, the section
.resetvec is not kept and the section .bootpg is placed in the
diff --git a/config.mk b/config.mk
index f42b655..6c0976d 100644
--- a/config.mk
+++ b/config.mk
@@ -161,6 +161,10 @@ CHECK = sparse
#########################################################################
# Load generated board configuration
+ifeq ($(CONFIG_TPL_BUILD),y)
+# Include TPL autoconf
+sinclude $(OBJTREE)/include/tpl-autoconf.mk
+else
ifeq ($(CONFIG_SPL_BUILD),y)
# Include SPL autoconf
sinclude $(OBJTREE)/include/spl-autoconf.mk
@@ -168,6 +172,7 @@ else
# Include normal autoconf
sinclude $(OBJTREE)/include/autoconf.mk
endif
+endif
sinclude $(OBJTREE)/include/config.mk
# Some architecture config.mk files need to know what CPUDIR is set to,
@@ -239,6 +244,9 @@ endif
ifeq ($(CONFIG_SPL_BUILD),y)
CPPFLAGS += -DCONFIG_SPL_BUILD
+ifeq ($(CONFIG_TPL_BUILD),y)
+CPPFLAGS += -DCONFIG_TPL_BUILD
+endif
endif
# Does this architecture support generic board init?
@@ -310,10 +318,19 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),)
LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
endif
+ifeq ($(CONFIG_TPL_BUILD),y)
+LDFLAGS_u-boot-tpl += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL)
+ifneq ($(CONFIG_SPL_TEXT_BASE),)
+LDFLAGS_u-boot-tpl += -Ttext $(CONFIG_SPL_TEXT_BASE)
+endif
+else
+ifeq ($(CONFIG_SPL_BUILD),y)
LDFLAGS_u-boot-spl += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL)
ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_u-boot-spl += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif
+endif
+endif
# Linus' kernel sanity checking tool
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
diff --git a/doc/README.TPL b/doc/README.TPL
new file mode 100644
index 0000000..3056696
--- /dev/null
+++ b/doc/README.TPL
@@ -0,0 +1,71 @@
+Generic TPL framework
+=====================
+
+Overview
+--------
+
+TPL---Third Program Loader.
+
+Due to the SPL on some boards(powerpc mpc85xx) has a size limit and cannot
+be compatible with all the external device(e.g. DDR). So add a tertiary
+program loader (TPL) to enable a loader stub loaded by the code from the
+SPL. It loads the final uboot image into DDR, then jump to it to begin
+execution. Now, only the powerpc mpc85xx has this requirement and will
+implemente it.
+
+Keep consistent with SPL, with this framework almost all source files for a
+board can be reused. No code duplication or symlinking is necessary anymore.
+
+How it works
+------------
+
+There has been a directory TOPDIR/spl which contains only a Makefile. It is
+shared by SPL and TPL. By the way, TPL will share something with SPL, such
+as options defined in the board config files.
+
+The object files are built separately for SPL/TPL and placed in this
+directory. The final binaries which are generated are u-boot-{spl|tpl},
+u-boot-{spl|tpl}.bin and u-boot-{spl|tpl}.map.
+
+During the TPL build a variable named CONFIG_TPL_BUILD is exported in the
+make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD.
+Source files can be compiled for TPL with options choosed in the board
+config file, based on whether CONFIG_TPL_BUILD is set.
+
+For example:
+
+drivers/mtd/nand/Makefile:
+COBJS-$(CONFIG_SPL_NAND_INIT) += nand.o
+
+CONFIG_SPL_NAND_INIT is set in the include/configs/P1022DS.h:
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_SPL_NAND_INIT
+#endif
+
+The building of TPL images can be with:
+
+#define CONFIG_TPL
+
+Because TPL images normally have a different text base, one has to be
+configured by defining CONFIG_SPL_TEXT_BASE. The linker script has to be
+defined with CONFIG_SPL_LDSCRIPT. Likewise, these symbols are all shared
+with SPL, base on whether CONFIG_SPL_BUILD or CONFIG_TPL_BUILD is set.
+
+To support generic U-Boot libraries and drivers in the TPL binary one can
+optionally define CONFIG_SPL_XXX_SUPPORT. Currently following options
+are supported:
+
+CONFIG_SPL_SLIBCOMMON_SUPPORT (common/libcommon.o)
+CONFIG_SPL_LIBDISK_SUPPORT (disk/libdisk.o)
+CONFIG_SPL_I2C_SUPPORT (drivers/i2c/libi2c.o)
+CONFIG_SPL_GPIO_SUPPORT (drivers/gpio/libgpio.o)
+CONFIG_SPL_MMC_SUPPORT (drivers/mmc/libmmc.o)
+CONFIG_SPL_SERIAL_SUPPORT (drivers/serial/libserial.o)
+CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
+CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
+CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
+CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
+CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
+CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
+CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o)
+CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index bb81e84..e1f817a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -39,6 +39,7 @@ COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o
+COBJS-$(CONFIG_SPL_NAND_INIT) += nand.o
else # not spl
diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c
index 50ff4fe..d00a13a 100644
--- a/drivers/mtd/nand/fsl_elbc_spl.c
+++ b/drivers/mtd/nand/fsl_elbc_spl.c
@@ -47,7 +47,10 @@ static void nand_wait(void)
}
}
-static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
+#ifndef CONFIG_TPL_BUILD
+static
+#endif
+int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
{
fsl_lbc_t *regs = LBC_BASE_ADDR;
uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
diff --git a/include/nand.h b/include/nand.h
index 228d871..2aa7238 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -153,6 +153,9 @@ int nand_unlock(nand_info_t *meminfo, loff_t start, size_t length,
int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst);
+#ifdef CONFIG_TPL_BUILD
+int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst);
+#endif
void nand_deselect(void);
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
diff --git a/spl/Makefile b/spl/Makefile
index eef8c87..134a2f0 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -15,14 +15,27 @@
# Based on top-level Makefile.
#
-CONFIG_SPL_BUILD := y
+ifeq ($(CONFIG_SPL_BUILD),y)
export CONFIG_SPL_BUILD
+endif
+ifeq ($(CONFIG_TPL_BUILD),y)
+export CONFIG_TPL_BUILD
+FILENAME := u-boot-tpl
+else
+FILENAME := u-boot-spl
+endif
include $(TOPDIR)/config.mk
# We want the final binaries in this directory
obj := $(OBJTREE)/spl/
+clean:
+ @find $(obj) -type f \
+ \( -name 'core' -o -name '*.bak' -o -name '*~' \
+ -o -name '*.o' -o -name '*.a' \) -print \
+ | xargs rm -f
+
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(SRCTREE)/board/$(VENDOR)/common/Makefile),y,n)
ifdef CONFIG_SPL_START_S_PATH
@@ -150,6 +163,7 @@ LDPPFLAGS += \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+ifndef CONFIG_TPL_BUILD
$(OBJTREE)/MLO: $(obj)u-boot-spl.bin
$(OBJTREE)/tools/mkimage -T omapimage \
-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
@@ -157,11 +171,12 @@ $(OBJTREE)/MLO: $(obj)u-boot-spl.bin
$(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin
$(OBJTREE)/tools/mkimage -T omapimage -n byteswap \
-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
+endif
$(OBJTREE)/SPL : $(obj)u-boot-spl.bin depend
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
-ALL-y += $(obj)u-boot-spl.bin
+ALL-y += $(obj)$(FILENAME).bin
ifdef CONFIG_SAMSUNG
ALL-y += $(obj)$(BOARD)-spl.bin
@@ -175,15 +190,15 @@ $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin
$(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin
endif
-$(obj)u-boot-spl.bin: $(obj)u-boot-spl
+$(obj)$(FILENAME).bin: $(obj)$(FILENAME)
$(OBJCOPY) $(OBJCFLAGS) -O binary $< $@
GEN_UBOOT = \
cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
- -Map u-boot-spl.map -o u-boot-spl
+ -Map $(FILENAME).map -o $(FILENAME)
-$(obj)u-boot-spl: depend $(START) $(LIBS) $(obj)u-boot-spl.lds
+$(obj)$(FILENAME): depend $(START) $(LIBS) $(obj)u-boot-spl.lds
$(GEN_UBOOT)
$(START): depend
--
1.7.0.4
More information about the U-Boot
mailing list