[U-Boot] [PATCH v3] drivers:power:max77686: add function to set voltage and mode
Piotr Wilczek
p.wilczek at samsung.com
Mon Jul 15 13:29:33 CEST 2013
Dear Tom,
This patch is delegated to you. Could you review this patch for the next
release?
Best regards,
Piotr Wilczek
--
Samsung R&D Institute Poland (SRPOL)
On 06/25/2013 09:59 AM, Piotr Wilczek wrote:
> This patch add new functions to pmic max77686 to set voltage and mode.
>
> Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> CC: Minkyu Kang <mk7.kang at samsung.com>
> CC: Rajeshwari Shinde <rajeshwari.s at samsung.com>
>
> Acked-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> ---
> Changes in v3:
> - removed magic values
> - used ARRAY_SIZE() for array size calculation
> - used switch case instead if else if
> - added return when pmic read error occurs
>
> Changes in v2:
> - changed printf to debug
>
> drivers/power/pmic/pmic_max77686.c | 192 ++++++++++++++++++++++++++++++++++++
> include/power/max77686_pmic.h | 26 +++++
> 2 files changed, 218 insertions(+)
>
> diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
> index 7fcb4c0..3960ca9 100644
> --- a/drivers/power/pmic/pmic_max77686.c
> +++ b/drivers/power/pmic/pmic_max77686.c
> @@ -30,6 +30,198 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +static const char max77686_buck_addr[] = {
> + 0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38
> +};
> +
> +static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
> +{
> + unsigned int hex = 0;
> +
> + switch (ldo) {
> + case 1:
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 15:
> + hex = (uV - 800000) / 25000;
> + break;
> + default:
> + hex = (uV - 800000) / 50000;
> + }
> +
> + if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
> + return hex;
> +
> + debug("%s: %ld is wrong voltage value for LDO%d\n", __func__, uV, ldo);
> + return 0;
> +}
> +
> +int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
> +{
> + unsigned int val, ret, hex, adr;
> +
> + if (ldo < 1 && ldo > 26) {
> + printf("%s: %d is wrong ldo number\n", __func__, ldo);
> + return -1;
> + }
> +
> + adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
> + hex = max77686_ldo_volt2hex(ldo, uV);
> +
> + if (!hex)
> + return -1;
> +
> + ret = pmic_reg_read(p, adr, &val);
> + if (ret)
> + return ret;
> +
> + val &= ~MAX77686_LDO_VOLT_MASK;
> + val |= hex;
> + ret |= pmic_reg_write(p, adr, val);
> +
> + return ret;
> +}
> +
> +int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
> +{
> + unsigned int val, ret, adr, mode;
> +
> + if (ldo < 1 && 26 < ldo) {
> + printf("%s: %d is wrong ldo number\n", __func__, ldo);
> + return -1;
> + }
> +
> + adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
> +
> + /* mode */
> + switch (opmode) {
> + case OPMODE_OFF:
> + mode = MAX77686_LDO_MODE_OFF;
> + break;
> + case OPMODE_STANDBY:
> + switch (ldo) {
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 10:
> + case 11:
> + case 12:
> + case 14:
> + case 15:
> + case 16:
> + mode = MAX77686_LDO_MODE_STANDBY;
> + break;
> + default:
> + mode = 0xff;
> + }
> + break;
> + case OPMODE_LPM:
> + mode = MAX77686_LDO_MODE_LPM;
> + break;
> + case OPMODE_ON:
> + mode = MAX77686_LDO_MODE_ON;
> + break;
> + default:
> + mode = 0xff;
> + }
> +
> + if (mode == 0xff) {
> + printf("%s: %d is not supported on LDO%d\n",
> + __func__, opmode, ldo);
> + return -1;
> + }
> +
> + ret = pmic_reg_read(p, adr, &val);
> + if (ret)
> + return ret;
> +
> + val &= ~MAX77686_LDO_MODE_MASK;
> + val |= mode;
> + ret |= pmic_reg_write(p, adr, val);
> +
> + return ret;
> +}
> +
> +int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
> +{
> + unsigned int val, ret, mask, adr, size, mode, mode_shift;
> +
> + size = ARRAY_SIZE(max77686_buck_addr);
> + if (buck >= size) {
> + printf("%s: %d is wrong buck number\n", __func__, buck);
> + return -1;
> + }
> +
> + adr = max77686_buck_addr[buck];
> +
> + /* mask */
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + mode_shift = MAX77686_BUCK_MODE_SHIFT_2;
> + break;
> + default:
> + mode_shift = MAX77686_BUCK_MODE_SHIFT_1;
> + }
> +
> + mask = MAX77686_BUCK_MODE_MASK << mode_shift;
> +
> + /* mode */
> + switch (opmode) {
> + case OPMODE_OFF:
> + mode = MAX77686_BUCK_MODE_OFF;
> + break;
> + case OPMODE_STANDBY:
> + switch (buck) {
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + mode = MAX77686_BUCK_MODE_STANDBY << mode_shift;
> + break;
> + default:
> + mode = 0xff;
> + }
> + break;
> + case OPMODE_LPM:
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + mode = MAX77686_BUCK_MODE_LPM << mode_shift;
> + break;
> + default:
> + mode = 0xff;
> + }
> + break;
> + case OPMODE_ON:
> + mode = MAX77686_BUCK_MODE_ON << mode_shift;
> + break;
> + default:
> + mode = 0xff;
> + }
> +
> + if (mode == 0xff) {
> + printf("%s: %d is not supported on BUCK%d\n",
> + __func__, opmode, buck);
> + return -1;
> + }
> +
> + ret = pmic_reg_read(p, adr, &val);
> + if (ret)
> + return ret;
> +
> + val &= ~mask;
> + val |= mode;
> + ret |= pmic_reg_write(p, adr, val);
> +
> + return ret;
> +}
> +
> int pmic_init(unsigned char bus)
> {
> static const char name[] = "MAX77686_PMIC";
> diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
> index 1c374a9..7339a3e 100644
> --- a/include/power/max77686_pmic.h
> +++ b/include/power/max77686_pmic.h
> @@ -155,6 +155,32 @@ enum {
> EN_LDO = (0x3 << 6),
> };
>
> +enum {
> + OPMODE_OFF = 0,
> + OPMODE_STANDBY,
> + OPMODE_LPM,
> + OPMODE_ON,
> +};
> +
> +int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
> +int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
> +int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
> +
> +#define MAX77686_LDO_VOLT_MAX_HEX 0x3f
> +#define MAX77686_LDO_VOLT_MASK 0x3f
> +#define MAX77686_LDO_MODE_MASK 0xc0
> +#define MAX77686_LDO_MODE_OFF (0x00 << 0x06)
> +#define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06)
> +#define MAX77686_LDO_MODE_LPM (0x02 << 0x06)
> +#define MAX77686_LDO_MODE_ON (0x03 << 0x06)
> +#define MAX77686_BUCK_MODE_MASK 0x03
> +#define MAX77686_BUCK_MODE_SHIFT_1 0x00
> +#define MAX77686_BUCK_MODE_SHIFT_2 0x04
> +#define MAX77686_BUCK_MODE_OFF 0x00
> +#define MAX77686_BUCK_MODE_STANDBY 0x01
> +#define MAX77686_BUCK_MODE_LPM 0x02
> +#define MAX77686_BUCK_MODE_ON 0x03
> +
> /* Buck1 1 volt value */
> #define MAX77686_BUCK1OUT_1V 0x5
> /* Buck1 1.05 volt value */
>
More information about the U-Boot
mailing list