[U-Boot] [PATCH V3 0/6] omap3_beagle: configs: improve BOOT_CMD options

Nishanth Menon nm at ti.com
Mon Jul 15 14:11:27 CEST 2013


With the latest transition to device tree, there is a need to simplify
the load of device tree depending on board type etc. While at it, simplify
few other changes as well.

Testing:
with a uEnv.txt as:
bootdir=/
bootpart=0:1

The following were the boot results:
Beagle (rev C1D): http://pastebin.com/fMdsKkgr
Beagle XM (rev C1): http://pastebin.com/p1zp9AhG

Changes in V3 since v2:
	- Minor fixes for RevB beagleboard DVIpup handling
		http://marc.info/?t=137357970500004&r=1&w=2
	- Picked up acked-by from http://marc.info/?t=137357970700007&r=1&w=2

V2: http://marc.info/?l=u-boot&m=137358206228251&w=2
V1: http://marc.info/?l=u-boot&m=137357963227510&w=2

Nishanth Menon (6):
  omap3_beagle: remove JFFS2 support.
  omap3_beagle: replace uImage.beagle with generic uImage
  beagleboard: remove RevB support for BeagleBoard Xm
  omap3_beagle: enable CMD_FS_GENERIC and simplify load of
    image/ramdisk
  omap3_beagle: support findfdt and loadfdt for devicetree support
  omap3_beagle: support booting from zImage and device tree as last
    option

 board/ti/beagle/beagle.c       |   28 +++++++------------------
 board/ti/beagle/beagle.h       |    3 +--
 include/configs/omap3_beagle.h |   44 ++++++++++++++++++++++++++++------------
 3 files changed, 39 insertions(+), 36 deletions(-)

-- 
1.7.9.5

Regards,
Nishanth Menon


More information about the U-Boot mailing list