[U-Boot] [PATCH] net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF case
Fabio Estevam
festevam at gmail.com
Fri Jul 19 15:01:34 CEST 2013
From: Fabio Estevam <fabio.estevam at freescale.com>
Commit de1d786e (add support for Xilinx 1000BASE-X phy (GTX)) introduced the
checking for ESTATUS_1000_XHALF, but it incorrectly sets the
SUPPORTED_1000baseX_Full flag in this case.
Set the SUPPORTED_1000baseX_Half flag instead.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
drivers/net/phy/phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 5ddb926..5692b1c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -404,7 +404,7 @@ int genphy_config(struct phy_device *phydev)
if (val & ESTATUS_1000_XFULL)
features |= SUPPORTED_1000baseX_Full;
if (val & ESTATUS_1000_XHALF)
- features |= SUPPORTED_1000baseX_Full;
+ features |= SUPPORTED_1000baseX_Half;
}
phydev->supported = features;
--
1.8.1.2
More information about the U-Boot
mailing list