[U-Boot] [PATCHv2 2/8] armv7: hw_data: change clock divider setting.

Sourav Poddar sourav.poddar at ti.com
Tue Jul 23 10:59:33 CEST 2013


Clock requirement for qspi clk is 192 Mhz.
According to the below formulae,

f dpll = f ref * 2 * m /(n + 1)
clockoutx2_Hmn = f dpll / (hmn+ 1)

fref = 20 Mhz, m = 96, n = 4 gives f dpll = 768 Mhz
For clockoutx2_Hmn to be 768, hmn + 1 should be 4.

Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
---
 arch/arm/cpu/armv7/omap5/hw_data.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 4d0eb45..ef52d43 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -186,7 +186,7 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
 
 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
 	{32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
-	{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 20 MHz   */
+	{96, 4, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 20 MHz   */
 	{160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
 	{20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
 	{192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
-- 
1.7.1



More information about the U-Boot mailing list