[U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors

[Otavio Salvador]

On Wed, Jul 24, 2013 at 4:59 PM, Robert Winkler
<robert.winkler at boundarydevices.com> wrote:
> Stefano,
>
>
> On Wed, Jul 24, 2013 at 4:09 AM, Stefano Babic <sbabic at denx.de> wrote:
>>
>> Hi Robert,
>>
>> On 24/07/2013 01:15, Robert Winkler wrote:
>>
>> > Incidentally, I just grepped for CONFIG_CMD_HDMIDETECT and I don't see
>> > it documented anywhere.  It should probably be added to the README
>>
>> Right - but let's do it in a separate patch.
>
>
> Both the bmode command and the hdmidet command are undocumented and both are
> imx specific.  Bmode is used for imx6 and 53 currently so I know those are
> at least supported which is what Troy's original commit message said.
> Eric tells me that hdmidet is imx6 specific.
>
> So the documentation shuld probably go both in doc/README.imx5 and imx6
> files?
>
> Here's a rough draft of what I'd actually say
>
> CONFIG_CMD_HDMIDETECT
> Add the 'hdmidet' command; returns true if an HDMI monitor is detected.
>
> CONFIG_CMD_BMODE
> Add the 'bmode' (bootmode) command for forcing a boot from other media.
> This is useful for forcing the ROM's usb downloader to activate upon a
> watchdog reset
> which is nice when iterating on U-Boot.  Using the reset button or running
> bmode normal
> will set it back to normal

I think it should be together with commands and in  the documentation
you could say it is specific.

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750