[U-Boot] [PATCH v2 5/6] cmd_sf|env_sf: Fix code cleanup
Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-teki at xilinx.com
Mon Jul 29 19:24:52 CEST 2013
- line over 80 characters
- add tabs
- CHECK: Alignment should match open parenthesis
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
common/cmd_sf.c | 27 ++++++++++++++-------------
common/env_sf.c | 2 +-
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 19b0dc9..34844ac 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -151,12 +151,12 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset,
size_t len, const char *buf, char *cmp_buf, size_t *skipped)
{
debug("offset=%#x, sector_size=%#x, len=%#zx\n",
- offset, flash->sector_size, len);
+ offset, flash->sector_size, len);
if (spi_flash_read(flash, offset, len, cmp_buf))
return "read";
if (memcmp(cmp_buf, buf, len) == 0) {
debug("Skip region %x size %zx: no change\n",
- offset, len);
+ offset, len);
*skipped += len;
return NULL;
}
@@ -200,7 +200,7 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset,
todo = min(end - buf, flash->sector_size);
if (get_timer(last_update) > 100) {
printf(" \rUpdating, %zu%% %lu B/s",
- 100 - (end - buf) / scale,
+ 100 - (end - buf) / scale,
bytes_per_second(buf - start_buf,
start_time));
last_update = get_timer(0);
@@ -220,9 +220,9 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset,
delta = get_timer(start_time);
printf("%zu bytes written, %zu bytes skipped", len - skipped,
- skipped);
+ skipped);
printf(" in %ld.%lds, speed %ld B/s\n",
- delta / 1000, delta % 1000, bytes_per_second(len, start_time));
+ delta / 1000, delta % 1000, bytes_per_second(len, start_time));
return 0;
}
@@ -252,7 +252,7 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
/* Consistency checking */
if (offset + len > flash->size) {
printf("ERROR: attempting %s past flash size (%#x)\n",
- argv[0], flash->size);
+ argv[0], flash->size);
return 1;
}
@@ -262,9 +262,9 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
return 1;
}
- if (strcmp(argv[0], "update") == 0)
+ if (strcmp(argv[0], "update") == 0) {
ret = spi_flash_update(flash, offset, len, buf);
- else if (strncmp(argv[0], "read", 4) == 0 ||
+ } else if (strncmp(argv[0], "read", 4) == 0 ||
strncmp(argv[0], "write", 5) == 0) {
int read;
@@ -275,7 +275,7 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
ret = spi_flash_write(flash, offset, len, buf);
printf("SF: %zu bytes @ %#x %s: %s\n", (size_t)len, (u32)offset,
- read ? "Read" : "Written", ret ? "ERROR" : "OK");
+ read ? "Read" : "Written", ret ? "ERROR" : "OK");
}
unmap_physmem(buf, len);
@@ -304,13 +304,13 @@ static int do_spi_flash_erase(int argc, char * const argv[])
/* Consistency checking */
if (offset + len > flash->size) {
printf("ERROR: attempting %s past flash size (%#x)\n",
- argv[0], flash->size);
+ argv[0], flash->size);
return 1;
}
ret = spi_flash_erase(flash, offset, len);
printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)len, (u32)offset,
- ret ? "ERROR" : "OK");
+ ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
}
@@ -470,7 +470,8 @@ static int do_spi_flash_test(int argc, char * const argv[])
}
#endif /* CONFIG_CMD_SF_TEST */
-static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
const char *cmd;
int ret;
@@ -526,7 +527,7 @@ U_BOOT_CMD(
"SPI flash sub-system",
"probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n"
" and chip select\n"
- "sf read addr offset len - read `len' bytes starting at\n"
+ "sf read addr offset len - read `len' bytes starting at\n"
" `offset' to memory at `addr'\n"
"sf write addr offset len - write `len' bytes from memory\n"
" at `addr' to flash at `offset'\n"
diff --git a/common/env_sf.c b/common/env_sf.c
index e3e1897..9f806fb 100644
--- a/common/env_sf.c
+++ b/common/env_sf.c
@@ -7,7 +7,7 @@
*
* (C) Copyright 2008 Atmel Corporation
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <environment.h>
--
1.8.3
More information about the U-Boot
mailing list