[U-Boot] [PATCH V2 5/6] ARM: AM43xx: Add build support
Lokesh Vutla
lokeshvutla at ti.com
Tue Jul 30 08:06:31 CEST 2013
Add AM43xx support in the required places
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/omap-common/boot-common.c | 3 ++-
drivers/serial/ns16550.c | 5 +++--
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 2ba88d0..8f27507 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -16,7 +16,7 @@ COBJS += cache_v7.o
COBJS += cpu.o
COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),)
SOBJS += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 6b9ce36..6b4772b 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -40,7 +40,8 @@ void save_omap_boot_params(void)
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
-#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX)
+#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \
+ !defined(CONFIG_AM43XX)
if ((omap_hw_init_context() ==
OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
gd->arch.omap_boot_params.omap_bootmode =
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index d77c25f..bc976ba 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -57,7 +57,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_TI814X)
+ defined(CONFIG_AM33XX) || defined(CONFIG_TI814X) || \
+ defined(CONFIG_AM43XX)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
@@ -72,7 +73,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
serial_out(UART_LCRVAL, &com_port->lcr);
#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
- defined(CONFIG_TI814X)
+ defined(CONFIG_TI814X) || defined(CONFIG_AM43XX)
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
--
1.7.9.5
More information about the U-Boot
mailing list