[U-Boot] [PATCH v2 5/9] am33xx: add ti814x specific register definitions

Fri Mar 1 02:29:49 CET 2013

Support the ti814x specific register definitions within
arch-am33xx.

Signed-off-by: Matt Porter <mporter at ti.com>
Reviewed-by: Tom Rini <trini at ti.com>

---
v2: Update for hardware.h split
---
 arch/arm/cpu/armv7/am33xx/sys_info.c               |    3 +++
 arch/arm/include/asm/arch-am33xx/cpu.h             |   11 +++++----
 arch/arm/include/asm/arch-am33xx/hardware.h        |   21 ++++-------------
 arch/arm/include/asm/arch-am33xx/hardware_am33xx.h |   24 ++++++++++++++++++++
 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h |   23 +++++++++++++++++++
 arch/arm/include/asm/arch-am33xx/omap.h            |    7 ++++++
 arch/arm/include/asm/arch-am33xx/spl.h             |    5 ++++
 7 files changed, 73 insertions(+), 21 deletions(-)

diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c
index 507b618..402127c 100644
--- a/arch/arm/cpu/armv7/am33xx/sys_info.c
+++ b/arch/arm/cpu/armv7/am33xx/sys_info.c
@@ -98,6 +98,9 @@ int print_cpuinfo(void)
 	case AM335X:
 		cpu_s = "AM335X";
 		break;
+	case TI81XX:
+		cpu_s = "TI81XX";
+		break;
 	default:
 		cpu_s = "Unknown cpu type";
 		break;
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 16e8a80..3d3a7c8 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -42,9 +42,10 @@
 #define HS_DEVICE			0x2
 #define GP_DEVICE			0x3
 
-/* cpu-id for AM33XX family */
+/* cpu-id for AM33XX and TI81XX family */
 #define AM335X				0xB944
-#define DEVICE_ID			0x44E10600
+#define TI81XX				0xB81E
+#define DEVICE_ID			(CTRL_BASE + 0x0600)
 
 /* This gives the status of the boot mode pins on the evm */
 #define SYSBOOT_MASK			(BIT(0) | BIT(1) | BIT(2)\
@@ -52,9 +53,11 @@
 
 /* Reset control */
 #ifdef CONFIG_AM33XX
-#define PRM_RSTCTRL			0x44E00F00
-#define PRM_RSTST			0x44E00F08
+#define PRM_RSTCTRL			(PRCM_BASE + 0x0F00)
+#elif defined(CONFIG_TI814X)
+#define PRM_RSTCTRL			(PRCM_BASE + 0x00A0)
 #endif
+#define PRM_RSTST			(PRM_RSTCTRL + 8)
 #define PRM_RSTCTRL_RESET		0x01
 #define PRM_RSTST_WARM_RESET_MASK	0x232
 
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 24a9b8d..5a27f9c 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -19,6 +19,7 @@
 #ifndef __AM33XX_HARDWARE_H
 #define __AM33XX_HARDWARE_H
 
+#include <config.h>
 #include <asm/arch/omap.h>
 #ifdef CONFIG_AM33XX
 #include <asm/arch/hardware_am33xx.h>
@@ -26,8 +27,9 @@
 #include <asm/arch/hardware_ti814x.h>
 #endif
 
-/* Module base addresses */
-#define UART0_BASE			0x44E09000
+/*
+ * Common hardware definitions
+ */
 
 /* DM Timer base addresses */
 #define DM_TIMER0_BASE			0x4802C000
@@ -42,21 +44,10 @@
 /* GPIO Base address */
 #define GPIO0_BASE			0x48032000
 #define GPIO1_BASE			0x4804C000
-#define GPIO2_BASE			0x481AC000
 
 /* BCH Error Location Module */
 #define ELM_BASE			0x48080000
 
-/* Watchdog Timer */
-#define WDT_BASE			0x44E35000
-
-/* Control Module Base Address */
-#define CTRL_BASE			0x44E10000
-#define CTRL_DEVICE_BASE		0x44E10600
-
-/* PRCM Base Address */
-#define PRCM_BASE			0x44E00000
-
 /* EMIF Base address */
 #define EMIF4_0_CFG_BASE		0x4C000000
 #define EMIF4_1_CFG_BASE		0x4D000000
@@ -90,10 +81,6 @@
 
 /* CPSW Config space */
 #define CPSW_BASE			0x4A100000
-#define CPSW_MDIO_BASE			0x4A101000
-
-/* RTC base address */
-#define RTC_BASE			0x44E3E000
 
 /* OTG */
 #define USB0_OTG_BASE			0x47401000
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
index 7a4070c..fa02f19 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
@@ -19,6 +19,24 @@
 #ifndef __AM33XX_HARDWARE_AM33XX_H
 #define __AM33XX_HARDWARE_AM33XX_H
 
+/* Module base addresses */
+
+/* UART Base Address */
+#define UART0_BASE			0x44E09000
+
+/* GPIO Base address */
+#define GPIO2_BASE			0x481AC000
+
+/* Watchdog Timer */
+#define WDT_BASE			0x44E35000
+
+/* Control Module Base Address */
+#define CTRL_BASE			0x44E10000
+#define CTRL_DEVICE_BASE		0x44E10600
+
+/* PRCM Base Address */
+#define PRCM_BASE			0x44E00000
+
 /* VTP Base address */
 #define VTP0_CTRL_ADDR			0x44E10E0C
 
@@ -27,4 +45,10 @@
 #define DDR_PHY_DATA_ADDR		0x44E120C8
 #define DDR_DATA_REGS_NR		2
 
+/* CPSW Config space */
+#define CPSW_MDIO_BASE			0x4A101000
+
+/* RTC base address */
+#define RTC_BASE			0x44E3E000
+
 #endif /* __AM33XX_HARDWARE_AM33XX_H */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
index af7d1d8..a950ac3 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
@@ -19,6 +19,23 @@
 #ifndef __AM33XX_HARDWARE_TI814X_H
 #define __AM33XX_HARDWARE_TI814X_H
 
+/* Module base addresses */
+
+/* UART Base Address */
+#define UART0_BASE			0x48020000
+
+/* Watchdog Timer */
+#define WDT_BASE			0x481C7000
+
+/* Control Module Base Address */
+#define CTRL_BASE			0x48140000
+
+/* PRCM Base Address */
+#define PRCM_BASE			0x48180000
+
+/* PLL Subsystem Base Address */
+#define PLL_SUBSYS_BASE			0x481C5000
+
 /* VTP Base address */
 #define VTP0_CTRL_ADDR			0x48140E0C
 
@@ -27,4 +44,10 @@
 #define DDR_PHY_DATA_ADDR		0x47C0C4C8
 #define DDR_DATA_REGS_NR		4
 
+/* CPSW Config space */
+#define CPSW_MDIO_BASE			0x4A100800
+
+/* RTC base address */
+#define RTC_BASE			0x480C0000
+
 #endif /* __AM33XX_HARDWARE_TI814X_H */
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index 850f8a5..ba4f6d2 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -23,13 +23,20 @@
 #ifndef _OMAP_H_
 #define _OMAP_H_
 
+#include <config.h>
+
 /*
  * Non-secure SRAM Addresses
  * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
  * at 0x40304000(EMU base) so that our code works for both EMU and GP
  */
+#ifdef CONFIG_AM33XX
 #define NON_SECURE_SRAM_START	0x40304000
 #define NON_SECURE_SRAM_END	0x4030E000
+#elif defined(CONFIG_TI814X)
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40320000
+#endif
 
 /* ROM code defines */
 /* Boot device */
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 644ff35..9b5fe9e 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -25,8 +25,13 @@
 
 #define BOOT_DEVICE_XIP       	2
 #define BOOT_DEVICE_NAND	5
+#ifdef CONFIG_AM33XX
 #define BOOT_DEVICE_MMC1	8
 #define BOOT_DEVICE_MMC2	9	/* eMMC or daughter card */
+#elif defined(CONFIG_TI814X)
+#define BOOT_DEVICE_MMC1	9
+#define BOOT_DEVICE_MMC2	8	/* ROM only supports 2nd instance */
+#endif
 #define BOOT_DEVICE_SPI		11
 #define BOOT_DEVICE_UART	65
 #define BOOT_DEVICE_CPGMAC	70
-- 
1.7.9.5

