[U-Boot] [PATCH v4 3/5] dfu: NAND specific routines for DFU operation
Tom Rini
trini at ti.com
Mon Mar 4 23:17:11 CET 2013
From: Pantelis Antoniou <panto at antoniou-consulting.com>
Support for NAND storage devices to work with the DFU framework.
Signed-off-by: Pantelis Antoniou <panto at antoniou-consulting.com>
Signed-off-by: Tom Rini <trini at ti.com>
---
Changes in v4: None
Changes in v3:
- Rework logic in nand_block_op for nand_(read|write)_skip_bad returning
just a size for actual used length.
- Remove unused externs from drivers/dfu/dfu_nand.c
Changes in v2:
- nand_block_op calls nand_(read|write)_skip_bad directly.
- Bugfix in dfu_nand to make sure we set dfu->skip_bad to 0 on each
iteration.
drivers/dfu/Makefile | 1 +
drivers/dfu/dfu.c | 8 ++
drivers/dfu/dfu_nand.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++++
include/dfu.h | 23 ++++++
4 files changed, 227 insertions(+)
create mode 100644 drivers/dfu/dfu_nand.c
diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index 7b717bc..153095d 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -27,6 +27,7 @@ LIB = $(obj)libdfu.o
COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o
COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o
+COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o
SRCS := $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index fb9b417..44d29de 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -86,6 +86,7 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
/* initial state */
dfu->crc = 0;
dfu->offset = 0;
+ dfu->bad_skip = 0;
dfu->i_blk_seq_num = 0;
dfu->i_buf_start = dfu_buf;
dfu->i_buf_end = dfu_buf + sizeof(dfu_buf);
@@ -234,6 +235,8 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
dfu->i_buf = dfu->i_buf_start;
dfu->b_left = 0;
+ dfu->bad_skip = 0;
+
dfu->inited = 1;
}
@@ -263,6 +266,8 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
dfu->i_buf = dfu->i_buf_start;
dfu->b_left = 0;
+ dfu->bad_skip = 0;
+
dfu->inited = 0;
}
@@ -285,6 +290,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
if (strcmp(interface, "mmc") == 0) {
if (dfu_fill_entity_mmc(dfu, s))
return -1;
+ } else if (strcmp(interface, "nand") == 0) {
+ if (dfu_fill_entity_nand(dfu, s))
+ return -1;
} else {
printf("%s: Device %s not (yet) supported!\n",
__func__, interface);
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
new file mode 100644
index 0000000..b7f60dd
--- /dev/null
+++ b/drivers/dfu/dfu_nand.c
@@ -0,0 +1,195 @@
+/*
+ * dfu_nand.c -- DFU for NAND routines.
+ *
+ * Copyright (C) 2012-2013 Texas Instruments, Inc.
+ *
+ * Based on dfu_mmc.c which is:
+ * Copyright (C) 2012 Samsung Electronics
+ * author: Lukasz Majewski <l.majewski at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <div64.h>
+#include <dfu.h>
+#include <linux/mtd/mtd.h>
+#include <jffs2/load_kernel.h>
+#include <nand.h>
+
+enum dfu_nand_op {
+ DFU_OP_READ = 1,
+ DFU_OP_WRITE,
+};
+
+static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu,
+ u64 offset, void *buf, long *len)
+{
+ loff_t start;
+ size_t count, actual;
+ int ret;
+ int dev;
+ nand_info_t *nand;
+
+ /* if buf == NULL return total size of the area */
+ if (buf == NULL) {
+ *len = dfu->data.nand.size;
+ return 0;
+ }
+
+ start = dfu->data.nand.start + offset + dfu->bad_skip;
+ count = *len;
+ if (start + count >
+ dfu->data.nand.start + dfu->data.nand.size) {
+ printf("%s: block_op out of bounds\n", __func__);
+ return -1;
+ }
+
+ dev = nand_curr_device;
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE ||
+ !nand_info[dev].name) {
+ printf("%s: invalid nand device\n", __func__);
+ return -1;
+ }
+
+ nand = &nand_info[dev];
+
+ if (op == DFU_OP_READ)
+ ret = nand_read_skip_bad(nand, start, &count, &actual,
+ nand->size, buf);
+ else
+ ret = nand_write_skip_bad(nand, start, &count, &actual,
+ nand->size, buf, 0);
+
+ if (ret != 0) {
+ printf("%s: nand_%s_skip_bad call failed at %llx!\n",
+ __func__, op == DFU_OP_READ ? "read" : "write",
+ start);
+ return ret;
+ }
+
+ /*
+ * Find out where we stopped writing data. This can be deeper into
+ * the NAND than we expected due to having to skip bad blocks. So
+ * we must take this into account for the next write, if any.
+ */
+ if (actual > count) {
+ printf("%s: skipped 0x%x bad bytes at 0x%llx\n", __func__,
+ actual - count, start);
+ dfu->bad_skip += actual - count;
+ }
+
+ return ret;
+}
+
+static inline int nand_block_write(struct dfu_entity *dfu,
+ u64 offset, void *buf, long *len)
+{
+ return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
+}
+
+static inline int nand_block_read(struct dfu_entity *dfu,
+ u64 offset, void *buf, long *len)
+{
+ return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
+}
+
+static int dfu_write_medium_nand(struct dfu_entity *dfu,
+ u64 offset, void *buf, long *len)
+{
+ int ret = -1;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ ret = nand_block_write(dfu, offset, buf, len);
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
+ long *len)
+{
+ int ret = -1;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ ret = nand_block_read(dfu, offset, buf, len);
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
+{
+ char *st;
+ int ret, dev, part;
+
+ dfu->dev_type = DFU_DEV_NAND;
+ st = strsep(&s, " ");
+ if (!strcmp(st, "raw")) {
+ dfu->layout = DFU_RAW_ADDR;
+ dfu->data.nand.start = simple_strtoul(s, &s, 16);
+ s++;
+ dfu->data.nand.size = simple_strtoul(s, &s, 16);
+ } else if (!strcmp(st, "part")) {
+ char mtd_id[32];
+ struct mtd_device *mtd_dev;
+ u8 part_num;
+ struct part_info *pi;
+
+ dfu->layout = DFU_RAW_ADDR;
+
+ dev = simple_strtoul(s, &s, 10);
+ s++;
+ part = simple_strtoul(s, &s, 10);
+
+ sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
+ printf("using id '%s'\n", mtd_id);
+
+ mtdparts_init();
+
+ ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
+ if (ret != 0) {
+ printf("Could not locate '%s'\n", mtd_id);
+ return -1;
+ }
+
+ dfu->data.nand.start = pi->offset;
+ dfu->data.nand.size = pi->size;
+
+ } else {
+ printf("%s: Memory layout (%s) not supported!\n", __func__, st);
+ return -1;
+ }
+
+ dfu->read_medium = dfu_read_medium_nand;
+ dfu->write_medium = dfu_write_medium_nand;
+
+ /* initial state */
+ dfu->inited = 0;
+
+ return 0;
+}
diff --git a/include/dfu.h b/include/dfu.h
index 9c6b364..86b7d66 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -56,6 +56,15 @@ struct mmc_internal_data {
unsigned int part;
};
+struct nand_internal_data {
+ /* RAW programming */
+ u64 start;
+ u64 size;
+
+ unsigned int dev;
+ unsigned int part;
+};
+
static inline unsigned int get_mmc_blk_size(int dev)
{
return find_mmc_device(dev)->read_bl_len;
@@ -75,6 +84,7 @@ struct dfu_entity {
union {
struct mmc_internal_data mmc;
+ struct nand_internal_data nand;
} data;
int (*read_medium)(struct dfu_entity *dfu,
@@ -95,6 +105,8 @@ struct dfu_entity {
long r_left;
long b_left;
+ u32 bad_skip; /* for nand use */
+
unsigned int inited : 1;
};
@@ -119,4 +131,15 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s)
return -1;
}
#endif
+
+#ifdef CONFIG_DFU_NAND
+extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s);
+#else
+static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
+{
+ puts("NAND support not available!\n");
+ return -1;
+}
+#endif
+
#endif /* __DFU_ENTITY_H_ */
--
1.7.9.5
More information about the U-Boot
mailing list