[U-Boot] [PATCH 2/2] Exynos5: spl: Reduce clock init in spl
Alim Akhtar
akhtar.alim at gmail.com
Tue Mar 5 10:14:39 CET 2013
Hi Akshay,
On Tue, Feb 19, 2013 at 8:01 PM, Akshay Saraswat <akshay.s at samsung.com>wrote:
> This patch subtracts a part of clock init from spl
> and executes it after relocation. spl_clock_init
> executes in spl and system_clock_init executes after
> relocation in u-boot. This is done to gain some space by
> removing initially not necessary code.
>
> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
> ---
>
Look ok,
Reviewed-by: Alim Akhtar <alim.akhtar at samsung.com>
> board/samsung/smdk5250/Makefile | 3 +-
> board/samsung/smdk5250/clock_init.c | 429
> +---------------------------
> board/samsung/smdk5250/clock_init.h | 2 +
> board/samsung/smdk5250/lowlevel_init.S | 4 +-
> board/samsung/smdk5250/setup.h | 1 +
> board/samsung/smdk5250/smdk5250.c | 4 +
> board/samsung/smdk5250/spl_clock_init.c | 469
> +++++++++++++++++++++++++++++++
> 7 files changed, 482 insertions(+), 430 deletions(-)
> create mode 100644 board/samsung/smdk5250/spl_clock_init.c
>
> diff --git a/board/samsung/smdk5250/Makefile
> b/board/samsung/smdk5250/Makefile
> index 47c6a5a..3ceb7e2 100644
> --- a/board/samsung/smdk5250/Makefile
> +++ b/board/samsung/smdk5250/Makefile
> @@ -26,12 +26,13 @@ LIB = $(obj)lib$(BOARD).o
>
> SOBJS := lowlevel_init.o
>
> -COBJS := clock_init.o
> +COBJS := spl_clock_init.o
> COBJS += dmc_common.o dmc_init_ddr3.o
> COBJS += tzpc_init.o
> COBJS += smdk5250_spl.o
>
> ifndef CONFIG_SPL_BUILD
> +COBJS += clock_init.o
> COBJS += smdk5250.o
> endif
>
> diff --git a/board/samsung/smdk5250/clock_init.c
> b/board/samsung/smdk5250/clock_init.c
> index 30cbdcf..fe3cd8a 100644
> --- a/board/samsung/smdk5250/clock_init.c
> +++ b/board/samsung/smdk5250/clock_init.c
> @@ -34,109 +34,6 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> -struct arm_clk_ratios arm_clk_ratios[] = {
> - {
> - .arm_freq_mhz = 600,
> -
> - .apll_mdiv = 0xc8,
> - .apll_pdiv = 0x4,
> - .apll_sdiv = 0x1,
> -
> - .arm2_ratio = 0x0,
> - .apll_ratio = 0x1,
> - .pclk_dbg_ratio = 0x1,
> - .atb_ratio = 0x2,
> - .periph_ratio = 0x7,
> - .acp_ratio = 0x7,
> - .cpud_ratio = 0x1,
> - .arm_ratio = 0x0,
> - }, {
> - .arm_freq_mhz = 800,
> -
> - .apll_mdiv = 0x64,
> - .apll_pdiv = 0x3,
> - .apll_sdiv = 0x0,
> -
> - .arm2_ratio = 0x0,
> - .apll_ratio = 0x1,
> - .pclk_dbg_ratio = 0x1,
> - .atb_ratio = 0x3,
> - .periph_ratio = 0x7,
> - .acp_ratio = 0x7,
> - .cpud_ratio = 0x2,
> - .arm_ratio = 0x0,
> - }, {
> - .arm_freq_mhz = 1000,
> -
> - .apll_mdiv = 0x7d,
> - .apll_pdiv = 0x3,
> - .apll_sdiv = 0x0,
> -
> - .arm2_ratio = 0x0,
> - .apll_ratio = 0x1,
> - .pclk_dbg_ratio = 0x1,
> - .atb_ratio = 0x4,
> - .periph_ratio = 0x7,
> - .acp_ratio = 0x7,
> - .cpud_ratio = 0x2,
> - .arm_ratio = 0x0,
> - }, {
> - .arm_freq_mhz = 1200,
> -
> - .apll_mdiv = 0x96,
> - .apll_pdiv = 0x3,
> - .apll_sdiv = 0x0,
> -
> - .arm2_ratio = 0x0,
> - .apll_ratio = 0x3,
> - .pclk_dbg_ratio = 0x1,
> - .atb_ratio = 0x5,
> - .periph_ratio = 0x7,
> - .acp_ratio = 0x7,
> - .cpud_ratio = 0x3,
> - .arm_ratio = 0x0,
> - }, {
> - .arm_freq_mhz = 1400,
> -
> - .apll_mdiv = 0xaf,
> - .apll_pdiv = 0x3,
> - .apll_sdiv = 0x0,
> -
> - .arm2_ratio = 0x0,
> - .apll_ratio = 0x3,
> - .pclk_dbg_ratio = 0x1,
> - .atb_ratio = 0x6,
> - .periph_ratio = 0x7,
> - .acp_ratio = 0x7,
> - .cpud_ratio = 0x3,
> - .arm_ratio = 0x0,
> - }, {
> - .arm_freq_mhz = 1700,
> -
> - .apll_mdiv = 0x1a9,
> - .apll_pdiv = 0x6,
> - .apll_sdiv = 0x0,
> -
> - .arm2_ratio = 0x0,
> - .apll_ratio = 0x3,
> - .pclk_dbg_ratio = 0x1,
> - .atb_ratio = 0x6,
> - .periph_ratio = 0x7,
> - .acp_ratio = 0x7,
> - .cpud_ratio = 0x3,
> - .arm_ratio = 0x0,
> - }
> -};
> -
> -struct spl_clock_div spl_clock_div = {
> - .mpll_mdiv = 0xc8,
> - .mpll_pdiv = 0x3,
> - .mpll_sdiv = 0x0,
> - .bpll_mdiv = 0x64,
> - .bpll_pdiv = 0x3,
> - .bpll_sdiv = 0x0,
> -};
> -
> struct non_spl_clock_div non_spl_clock_div = {
> .cpll_mdiv = 0xde,
> .cpll_pdiv = 0x4,
> @@ -152,255 +49,20 @@ struct non_spl_clock_div non_spl_clock_div = {
> .vpll_sdiv = 0x2,
> };
>
> -struct mem_timings mem_timings = {
> - .pclk_cdrex_ratio = 0x5,
> - .timing_ref = 0x000000bb,
> - .timing_row = 0x8c36650e,
> - .timing_data = 0x3630580b,
> - .timing_power = 0x41000a44,
> - .phy0_dqs = 0x08080808,
> - .phy1_dqs = 0x08080808,
> - .phy0_dq = 0x08080808,
> - .phy1_dq = 0x08080808,
> - .phy0_pulld_dqs = 0xf,
> - .phy1_pulld_dqs = 0xf,
> -
> - .lpddr3_ctrl_phy_reset = 0x1,
> - .ctrl_start_point = 0x10,
> - .ctrl_inc = 0x10,
> - .ctrl_start = 0x1,
> - .ctrl_dll_on = 0x1,
> - .ctrl_ref = 0x8,
> -
> - .ctrl_force = 0x1a,
> - .ctrl_rdlat = 0x0b,
> - .ctrl_bstlen = 0x08,
> -
> - .fp_resync = 0x8,
> - .iv_size = 0x7,
> - .dfi_init_start = 1,
> - .aref_en = 1,
> -
> - .rd_fetch = 0x3,
> -
> - /*
> - * Dynamic Clock: Always Running
> - * Memory Burst length: 8
> - * Number of chips: 1
> - * Memory Bus width: 32 bit
> - * Memory Type: DDR3
> - * Additional Latancy for PLL: 0 Cycle
> - */
> - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
> - DMC_MEMCONTROL_DPWRDN_DISABLE |
> - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
> - DMC_MEMCONTROL_TP_DISABLE |
> - DMC_MEMCONTROL_DSREF_ENABLE |
> - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
> - DMC_MEMCONTROL_MEM_TYPE_DDR3 |
> - DMC_MEMCONTROL_MEM_WIDTH_32BIT |
> - DMC_MEMCONTROL_NUM_CHIP_1 |
> - DMC_MEMCONTROL_BL_8 |
> - DMC_MEMCONTROL_PZQ_DISABLE |
> - DMC_MEMCONTROL_MRR_BYTE_7_0,
> - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
> - DMC_MEMCONFIGx_CHIP_COL_10 |
> - DMC_MEMCONFIGx_CHIP_ROW_15 |
> - DMC_MEMCONFIGx_CHIP_BANK_8,
> - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
> - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
> - .prechconfig_tp_cnt = 0xff,
> - .dpwrdn_cyc = 0xff,
> - .dsref_cyc = 0xffff,
> - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
> - DMC_CONCONTROL_TIMEOUT_LEVEL0 |
> - DMC_CONCONTROL_RD_FETCH_DISABLE |
> - DMC_CONCONTROL_EMPTY_DISABLE |
> - DMC_CONCONTROL_AREF_EN_DISABLE |
> - DMC_CONCONTROL_IO_PD_CON_DISABLE,
> - .dmc_channels = 2,
> - .chips_per_channel = 2,
> - .chips_to_configure = 1,
> - .send_zq_init = 1,
> -};
> -
> -struct mem_params mem_params[] = {
> - {
> - .mem_manuf = MEM_MANUF_ELPIDA,
> - .mem_type = DDR_MODE_DDR3,
> - .frequency_mhz = 800,
> -
> - .direct_cmd_msr = {
> - 0x00020018, 0x00030000, 0x00010042, 0x00000d70
> - },
> -
> - .phy0_tFS = 0x4,
> - .phy1_tFS = 0x4,
> -
> - .zq_mode_dds = 0x7,
> - .zq_mode_term = 0x1,
> - .zq_mode_noterm = 0,
> -
> - .impedance = IMP_OUTPUT_DRV_30_OHM,
> - .gate_leveling_enable = 0,
> - }, {
> - .mem_manuf = MEM_MANUF_SAMSUNG,
> - .mem_type = DDR_MODE_DDR3,
> - .frequency_mhz = 800,
> -
> - .direct_cmd_msr = {
> - 0x00020018, 0x00030000, 0x00010000, 0x00000d70
> - },
> -
> - .phy0_tFS = 0x8,
> - .phy1_tFS = 0x8,
> -
> - .zq_mode_dds = 0x5,
> - .zq_mode_term = 0x1,
> - .zq_mode_noterm = 1,
> -
> - .impedance = IMP_OUTPUT_DRV_40_OHM,
> - .gate_leveling_enable = 1,
> - }
> -};
> -
> -
> -/**
> - * Get the required memory type and speed (SPL version).
> - *
> - * In SPL we have no device tree, so we use the machine parameters
> - *
> - * @param mem_type Returns memory type
> - * @param frequency_mhz Returns memory speed in MHz
> - * @param arm_freq Returns ARM clock speed in MHz
> - * @param mem_manuf Return Memory Manufacturer name
> - * @return 0 if all ok
> - */
> -static int clock_get_mem_selection(enum ddr_mode *mem_type,
> - unsigned *frequency_mhz, unsigned *arm_freq,
> - enum mem_manuf *mem_manuf)
> -{
> - struct spl_machine_param *params;
> -
> - params = spl_get_machine_params();
> - *mem_type = params->mem_type;
> - *frequency_mhz = params->frequency_mhz;
> - *arm_freq = params->arm_freq_mhz;
> - *mem_manuf = params->mem_manuf;
> -
> - return 0;
> -}
> -
> -/* Get the ratios for setting ARM clock */
> -struct arm_clk_ratios *get_arm_ratios(void)
> -{
> - struct arm_clk_ratios *arm_ratio;
> - enum ddr_mode mem_type;
> - enum mem_manuf mem_manuf;
> - unsigned frequency_mhz, arm_freq;
> - int i;
> -
> - if (clock_get_mem_selection(&mem_type, &frequency_mhz,
> - &arm_freq, &mem_manuf))
> - ;
> - for (i = 0, arm_ratio = arm_clk_ratios; i <
> ARRAY_SIZE(arm_clk_ratios);
> - i++, arm_ratio++) {
> - if (arm_ratio->arm_freq_mhz == arm_freq)
> - return arm_ratio;
> - }
> -
> - /* will hang if failed to find clock ratio */
> - while (1)
> - ;
> -
> - return NULL;
> -}
> -
> -struct spl_clock_div *clock_get_spl_div(void)
> -{
> - return &spl_clock_div;
> -}
> -
> struct non_spl_clock_div *clock_get_non_spl_div(void)
> {
> return &non_spl_clock_div;
> }
>
> -struct mem_timings *clock_get_mem_timings(void)
> -{
> - return &mem_timings;
> -}
> -
> -struct mem_params *clock_get_mem_params(void)
> -{
> - struct mem_params *mem;
> - enum ddr_mode mem_type;
> - enum mem_manuf mem_manuf;
> - unsigned frequency_mhz, arm_freq;
> - int i;
> -
> - if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
> - &arm_freq, &mem_manuf)) {
> - for (i = 0, mem = mem_params; i < ARRAY_SIZE(mem_params);
> - i++, mem++) {
> - if (mem->mem_type == mem_type &&
> - mem->frequency_mhz ==
> frequency_mhz &&
> - mem->mem_manuf == mem_manuf)
> - return mem;
> - }
> - }
> -
> - /* will hang if failed to find memory timings */
> - while (1)
> - ;
> -
> - return NULL;
> -}
> -
> void system_clock_init()
> {
> struct exynos5_clock *clk = (struct exynos5_clock
> *)EXYNOS5_CLOCK_BASE;
> - struct arm_clk_ratios *arm_clk_ratio;
> - struct spl_clock_div *s_clk_div;
> struct non_spl_clock_div *ns_clk_div;
> - u32 val, tmp;
> + u32 val;
>
> - arm_clk_ratio = get_arm_ratios();
> - s_clk_div = clock_get_spl_div();
> ns_clk_div = clock_get_non_spl_div();
>
> - clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
> - do {
> - val = readl(&clk->mux_stat_cpu);
> - } while ((val | MUX_APLL_SEL_MASK) != val);
> -
> - clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
> - do {
> - val = readl(&clk->mux_stat_core1);
> - } while ((val | MUX_MPLL_SEL_MASK) != val);
> -
> - clrbits_le32(&clk->src_core1, MUX_CPLL_SEL_MASK);
> - clrbits_le32(&clk->src_core1, MUX_EPLL_SEL_MASK);
> - clrbits_le32(&clk->src_core1, MUX_VPLL_SEL_MASK);
> - clrbits_le32(&clk->src_core1, MUX_GPLL_SEL_MASK);
> - tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
> - | MUX_GPLL_SEL_MASK;
> - do {
> - val = readl(&clk->mux_stat_top2);
> - } while ((val | tmp) != val);
> -
> - clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
> - do {
> - val = readl(&clk->mux_stat_cdrex);
> - } while ((val | MUX_BPLL_SEL_MASK) != val);
> -
> /* PLL locktime */
> - writel(APLL_LOCK_VAL, &clk->apll_lock);
> -
> - writel(MPLL_LOCK_VAL, &clk->mpll_lock);
> -
> - writel(BPLL_LOCK_VAL, &clk->bpll_lock);
> -
> writel(CPLL_LOCK_VAL, &clk->cpll_lock);
>
> writel(GPLL_LOCK_VAL, &clk->gpll_lock);
> @@ -409,55 +71,6 @@ void system_clock_init()
>
> writel(VPLL_LOCK_VAL, &clk->vpll_lock);
>
> - writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
> -
> - writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
> - do {
> - val = readl(&clk->mux_stat_cpu);
> - } while ((val | HPM_SEL_SCLK_MPLL) != val);
> -
> - val = arm_clk_ratio->arm2_ratio << 28
> - | arm_clk_ratio->apll_ratio << 24
> - | arm_clk_ratio->pclk_dbg_ratio << 20
> - | arm_clk_ratio->atb_ratio << 16
> - | arm_clk_ratio->periph_ratio << 12
> - | arm_clk_ratio->acp_ratio << 8
> - | arm_clk_ratio->cpud_ratio << 4
> - | arm_clk_ratio->arm_ratio;
> - writel(val, &clk->div_cpu0);
> - do {
> - val = readl(&clk->div_stat_cpu0);
> - } while (0 != val);
> -
> - writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
> - do {
> - val = readl(&clk->div_stat_cpu1);
> - } while (0 != val);
> -
> - /* Set APLL */
> - writel(APLL_CON1_VAL, &clk->apll_con1);
> - val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
> - arm_clk_ratio->apll_sdiv);
> - writel(val, &clk->apll_con0);
> - while (readl(&clk->apll_con0) & APLL_CON0_LOCKED)
> - ;
> -
> - /* Set MPLL */
> - writel(MPLL_CON1_VAL, &clk->mpll_con1);
> - val = set_pll(s_clk_div->mpll_mdiv,
> - s_clk_div->mpll_pdiv,
> s_clk_div->mpll_sdiv);
> - writel(val, &clk->mpll_con0);
> - while (readl(&clk->mpll_con0) & MPLL_CON0_LOCKED)
> - ;
> -
> - /* Set BPLL */
> - writel(BPLL_CON1_VAL, &clk->bpll_con1);
> - val = set_pll(s_clk_div->bpll_mdiv,
> - s_clk_div->bpll_pdiv,
> s_clk_div->bpll_sdiv);
> - writel(val, &clk->bpll_con0);
> - while (readl(&clk->bpll_con0) & BPLL_CON0_LOCKED)
> - ;
> -
> /* Set CPLL */
> writel(CPLL_CON1_VAL, &clk->cpll_con1);
> val = set_pll(ns_clk_div->cpll_mdiv,
> @@ -488,19 +101,11 @@ void system_clock_init()
> writel(VPLL_CON1_VAL, &clk->vpll_con1);
> val = set_pll(ns_clk_div->vpll_mdiv,
> ns_clk_div->vpll_pdiv,
> ns_clk_div->vpll_sdiv);
> +
> writel(val, &clk->vpll_con0);
> while (readl(&clk->vpll_con0) & VPLL_CON0_LOCKED)
> ;
>
> - writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
> - writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
> - while (readl(&clk->div_stat_core0) != 0)
> - ;
> -
> - writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
> - while (readl(&clk->div_stat_core1) != 0)
> - ;
> -
> writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
> while (readl(&clk->div_stat_sysrgt) != 0)
> ;
> @@ -549,29 +154,10 @@ void system_clock_init()
> while (readl(&clk->div_stat_r1x))
> ;
>
> - writel(CLK_REG_DISABLE, &clk->src_cdrex);
> -
> - writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
> - while (readl(&clk->div_stat_cdrex))
> - ;
> -
> - val = readl(&clk->src_cpu);
> - val |= CLK_SRC_CPU_VAL;
> - writel(val, &clk->src_cpu);
> -
> val = readl(&clk->src_top2);
> val |= CLK_SRC_TOP2_VAL;
> writel(val, &clk->src_top2);
>
> - val = readl(&clk->src_core1);
> - val |= CLK_SRC_CORE1_VAL;
> - writel(val, &clk->src_core1);
> -
> - writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
> - writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
> - while (readl(&clk->div_stat_fsys0))
> - ;
> -
> writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
> writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
> writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
> @@ -604,14 +190,3 @@ void system_clock_init()
> | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
> writel(val, &clk->div_fsys2);
> }
> -
> -void clock_init_dp_clock(void)
> -{
> - struct exynos5_clock *clk = (struct exynos5_clock
> *)EXYNOS5_CLOCK_BASE;
> -
> - /* DP clock enable */
> - setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
> -
> - /* We run DP at 267 Mhz */
> - setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
> -}
> diff --git a/board/samsung/smdk5250/clock_init.h
> b/board/samsung/smdk5250/clock_init.h
> index 12b5c55..03580d8 100644
> --- a/board/samsung/smdk5250/clock_init.h
> +++ b/board/samsung/smdk5250/clock_init.h
> @@ -162,5 +162,7 @@ struct mem_params *clock_get_mem_params(void);
> /*
> * Initialize clock for the device
> */
> +void spl_clock_init(void);
> +
> void system_clock_init(void);
> #endif
> diff --git a/board/samsung/smdk5250/lowlevel_init.S
> b/board/samsung/smdk5250/lowlevel_init.S
> index bc6cb6f..1e69c02 100644
> --- a/board/samsung/smdk5250/lowlevel_init.S
> +++ b/board/samsung/smdk5250/lowlevel_init.S
> @@ -69,7 +69,7 @@ lowlevel_init:
> beq 1f /* r0 == r1 then skip sdram init */
>
> /* init system clock */
> - bl system_clock_init
> + bl spl_clock_init
>
> /* Memory initialize */
> bl mem_ctrl_init
> @@ -79,7 +79,7 @@ lowlevel_init:
> ldmia r13!, {ip,pc}
>
> wakeup_reset:
> - bl system_clock_init
> + bl spl_clock_init
> bl mem_ctrl_init
> bl tzpc_init
>
> diff --git a/board/samsung/smdk5250/setup.h
> b/board/samsung/smdk5250/setup.h
> index b30d7d0..074219f 100644
> --- a/board/samsung/smdk5250/setup.h
> +++ b/board/samsung/smdk5250/setup.h
> @@ -595,5 +595,6 @@ void update_reset_dll(struct exynos5_dmc *, enum
> ddr_mode);
> void sdelay(unsigned long);
> void mem_ctrl_init(void);
> void system_clock_init(void);
> +void spl_clock_init(void);
> void tzpc_init(void);
> #endif
> diff --git a/board/samsung/smdk5250/smdk5250.c
> b/board/samsung/smdk5250/smdk5250.c
> index 7a5f132..01a1b5b 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -28,6 +28,7 @@
> #include <netdev.h>
> #include <spi.h>
> #include <asm/arch/cpu.h>
> +#include <asm/arch/dmc.h>
> #include <asm/arch/gpio.h>
> #include <asm/arch/mmc.h>
> #include <asm/arch/pinmux.h>
> @@ -35,6 +36,7 @@
> #include <asm/arch/sromc.h>
> #include <asm/arch/dp_info.h>
> #include <power/pmic.h>
> +#include "clock_init.h"
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -269,6 +271,8 @@ static int board_uart_init(void)
> int board_early_init_f(void)
> {
> int err;
> +
> + system_clock_init();
> err = board_uart_init();
> if (err) {
> debug("UART init failed\n");
> diff --git a/board/samsung/smdk5250/spl_clock_init.c
> b/board/samsung/smdk5250/spl_clock_init.c
> new file mode 100644
> index 0000000..cd6146e
> --- /dev/null
> +++ b/board/samsung/smdk5250/spl_clock_init.c
> @@ -0,0 +1,469 @@
> +/*
> + * Clock setup for SMDK5250 board based on EXYNOS5
> + *
> + * Copyright (C) 2012 Samsung Electronics
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/clk.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/spl.h>
> +
> +#include "clock_init.h"
> +#include "setup.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct arm_clk_ratios arm_clk_ratios[] = {
> + {
> + .arm_freq_mhz = 600,
> +
> + .apll_mdiv = 0xc8,
> + .apll_pdiv = 0x4,
> + .apll_sdiv = 0x1,
> +
> + .arm2_ratio = 0x0,
> + .apll_ratio = 0x1,
> + .pclk_dbg_ratio = 0x1,
> + .atb_ratio = 0x2,
> + .periph_ratio = 0x7,
> + .acp_ratio = 0x7,
> + .cpud_ratio = 0x1,
> + .arm_ratio = 0x0,
> + }, {
> + .arm_freq_mhz = 800,
> +
> + .apll_mdiv = 0x64,
> + .apll_pdiv = 0x3,
> + .apll_sdiv = 0x0,
> +
> + .arm2_ratio = 0x0,
> + .apll_ratio = 0x1,
> + .pclk_dbg_ratio = 0x1,
> + .atb_ratio = 0x3,
> + .periph_ratio = 0x7,
> + .acp_ratio = 0x7,
> + .cpud_ratio = 0x2,
> + .arm_ratio = 0x0,
> + }, {
> + .arm_freq_mhz = 1000,
> +
> + .apll_mdiv = 0x7d,
> + .apll_pdiv = 0x3,
> + .apll_sdiv = 0x0,
> +
> + .arm2_ratio = 0x0,
> + .apll_ratio = 0x1,
> + .pclk_dbg_ratio = 0x1,
> + .atb_ratio = 0x4,
> + .periph_ratio = 0x7,
> + .acp_ratio = 0x7,
> + .cpud_ratio = 0x2,
> + .arm_ratio = 0x0,
> + }, {
> + .arm_freq_mhz = 1200,
> +
> + .apll_mdiv = 0x96,
> + .apll_pdiv = 0x3,
> + .apll_sdiv = 0x0,
> +
> + .arm2_ratio = 0x0,
> + .apll_ratio = 0x3,
> + .pclk_dbg_ratio = 0x1,
> + .atb_ratio = 0x5,
> + .periph_ratio = 0x7,
> + .acp_ratio = 0x7,
> + .cpud_ratio = 0x3,
> + .arm_ratio = 0x0,
> + }, {
> + .arm_freq_mhz = 1400,
> +
> + .apll_mdiv = 0xaf,
> + .apll_pdiv = 0x3,
> + .apll_sdiv = 0x0,
> +
> + .arm2_ratio = 0x0,
> + .apll_ratio = 0x3,
> + .pclk_dbg_ratio = 0x1,
> + .atb_ratio = 0x6,
> + .periph_ratio = 0x7,
> + .acp_ratio = 0x7,
> + .cpud_ratio = 0x3,
> + .arm_ratio = 0x0,
> + }, {
> + .arm_freq_mhz = 1700,
> +
> + .apll_mdiv = 0x1a9,
> + .apll_pdiv = 0x6,
> + .apll_sdiv = 0x0,
> +
> + .arm2_ratio = 0x0,
> + .apll_ratio = 0x3,
> + .pclk_dbg_ratio = 0x1,
> + .atb_ratio = 0x6,
> + .periph_ratio = 0x7,
> + .acp_ratio = 0x7,
> + .cpud_ratio = 0x3,
> + .arm_ratio = 0x0,
> + }
> +};
> +
> +struct spl_clock_div spl_clock_div = {
> + .mpll_mdiv = 0xc8,
> + .mpll_pdiv = 0x3,
> + .mpll_sdiv = 0x0,
> + .bpll_mdiv = 0x64,
> + .bpll_pdiv = 0x3,
> + .bpll_sdiv = 0x0,
> +};
> +
> +struct mem_timings mem_timings = {
> + .pclk_cdrex_ratio = 0x5,
> + .timing_ref = 0x000000bb,
> + .timing_row = 0x8c36650e,
> + .timing_data = 0x3630580b,
> + .timing_power = 0x41000a44,
> + .phy0_dqs = 0x08080808,
> + .phy1_dqs = 0x08080808,
> + .phy0_dq = 0x08080808,
> + .phy1_dq = 0x08080808,
> + .phy0_pulld_dqs = 0xf,
> + .phy1_pulld_dqs = 0xf,
> +
> + .lpddr3_ctrl_phy_reset = 0x1,
> + .ctrl_start_point = 0x10,
> + .ctrl_inc = 0x10,
> + .ctrl_start = 0x1,
> + .ctrl_dll_on = 0x1,
> + .ctrl_ref = 0x8,
> +
> + .ctrl_force = 0x1a,
> + .ctrl_rdlat = 0x0b,
> + .ctrl_bstlen = 0x08,
> +
> + .fp_resync = 0x8,
> + .iv_size = 0x7,
> + .dfi_init_start = 1,
> + .aref_en = 1,
> +
> + .rd_fetch = 0x3,
> +
> + /*
> + * Dynamic Clock: Always Running
> + * Memory Burst length: 8
> + * Number of chips: 1
> + * Memory Bus width: 32 bit
> + * Memory Type: DDR3
> + * Additional Latancy for PLL: 0 Cycle
> + */
> + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
> + DMC_MEMCONTROL_DPWRDN_DISABLE |
> + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
> + DMC_MEMCONTROL_TP_DISABLE |
> + DMC_MEMCONTROL_DSREF_ENABLE |
> + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
> + DMC_MEMCONTROL_MEM_TYPE_DDR3 |
> + DMC_MEMCONTROL_MEM_WIDTH_32BIT |
> + DMC_MEMCONTROL_NUM_CHIP_1 |
> + DMC_MEMCONTROL_BL_8 |
> + DMC_MEMCONTROL_PZQ_DISABLE |
> + DMC_MEMCONTROL_MRR_BYTE_7_0,
> + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
> + DMC_MEMCONFIGx_CHIP_COL_10 |
> + DMC_MEMCONFIGx_CHIP_ROW_15 |
> + DMC_MEMCONFIGx_CHIP_BANK_8,
> + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
> + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
> + .prechconfig_tp_cnt = 0xff,
> + .dpwrdn_cyc = 0xff,
> + .dsref_cyc = 0xffff,
> + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
> + DMC_CONCONTROL_TIMEOUT_LEVEL0 |
> + DMC_CONCONTROL_RD_FETCH_DISABLE |
> + DMC_CONCONTROL_EMPTY_DISABLE |
> + DMC_CONCONTROL_AREF_EN_DISABLE |
> + DMC_CONCONTROL_IO_PD_CON_DISABLE,
> + .dmc_channels = 2,
> + .chips_per_channel = 2,
> + .chips_to_configure = 1,
> + .send_zq_init = 1,
> +};
> +
> +struct mem_params mem_params[] = {
> + {
> + .mem_manuf = MEM_MANUF_ELPIDA,
> + .mem_type = DDR_MODE_DDR3,
> + .frequency_mhz = 800,
> +
> + .direct_cmd_msr = {
> + 0x00020018, 0x00030000, 0x00010042, 0x00000d70
> + },
> +
> + .phy0_tFS = 0x4,
> + .phy1_tFS = 0x4,
> +
> + .zq_mode_dds = 0x7,
> + .zq_mode_term = 0x1,
> + .zq_mode_noterm = 0,
> +
> + .impedance = IMP_OUTPUT_DRV_30_OHM,
> + .gate_leveling_enable = 0,
> + }, {
> + .mem_manuf = MEM_MANUF_SAMSUNG,
> + .mem_type = DDR_MODE_DDR3,
> + .frequency_mhz = 800,
> +
> + .direct_cmd_msr = {
> + 0x00020018, 0x00030000, 0x00010000, 0x00000d70
> + },
> +
> + .phy0_tFS = 0x8,
> + .phy1_tFS = 0x8,
> +
> + .zq_mode_dds = 0x5,
> + .zq_mode_term = 0x1,
> + .zq_mode_noterm = 1,
> +
> + .impedance = IMP_OUTPUT_DRV_40_OHM,
> + .gate_leveling_enable = 1,
> + }
> +};
> +
> +
> +/**
> + * Get the required memory type and speed (SPL version).
> + *
> + * In SPL we have no device tree, so we use the machine parameters
> + *
> + * @param mem_type Returns memory type
> + * @param frequency_mhz Returns memory speed in MHz
> + * @param arm_freq Returns ARM clock speed in MHz
> + * @param mem_manuf Return Memory Manufacturer name
> + * @return 0 if all ok
> + */
> +static int clock_get_mem_selection(enum ddr_mode *mem_type,
> + unsigned *frequency_mhz, unsigned *arm_freq,
> + enum mem_manuf *mem_manuf)
> +{
> + struct spl_machine_param *params;
> +
> + params = spl_get_machine_params();
> + *mem_type = params->mem_type;
> + *frequency_mhz = params->frequency_mhz;
> + *arm_freq = params->arm_freq_mhz;
> + *mem_manuf = params->mem_manuf;
> +
> + return 0;
> +}
> +
> +/* Get the ratios for setting ARM clock */
> +struct arm_clk_ratios *get_arm_ratios(void)
> +{
> + struct arm_clk_ratios *arm_ratio;
> + enum ddr_mode mem_type;
> + enum mem_manuf mem_manuf;
> + unsigned frequency_mhz, arm_freq;
> + int i;
> +
> + if (clock_get_mem_selection(&mem_type, &frequency_mhz,
> + &arm_freq, &mem_manuf))
> + ;
> + for (i = 0, arm_ratio = arm_clk_ratios; i <
> ARRAY_SIZE(arm_clk_ratios);
> + i++, arm_ratio++) {
> + if (arm_ratio->arm_freq_mhz == arm_freq)
> + return arm_ratio;
> + }
> +
> + /* will hang if failed to find clock ratio */
> + while (1)
> + ;
> +
> + return NULL;
> +}
> +
> +struct spl_clock_div *clock_get_spl_div(void)
> +{
> + return &spl_clock_div;
> +}
> +
> +struct mem_timings *clock_get_mem_timings(void)
> +{
> + return &mem_timings;
> +}
> +
> +struct mem_params *clock_get_mem_params(void)
> +{
> + struct mem_params *mem;
> + enum ddr_mode mem_type;
> + enum mem_manuf mem_manuf;
> + unsigned frequency_mhz, arm_freq;
> + int i;
> +
> + if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
> + &arm_freq, &mem_manuf)) {
> + for (i = 0, mem = mem_params; i < ARRAY_SIZE(mem_params);
> + i++, mem++) {
> + if (mem->mem_type == mem_type &&
> + mem->frequency_mhz ==
> frequency_mhz &&
> + mem->mem_manuf == mem_manuf)
> + return mem;
> + }
> + }
> +
> + /* will hang if failed to find memory timings */
> + while (1)
> + ;
> +
> + return NULL;
> +}
> +
> +void spl_clock_init()
> +{
> + struct exynos5_clock *clk = (struct exynos5_clock
> *)EXYNOS5_CLOCK_BASE;
> + struct arm_clk_ratios *arm_clk_ratio;
> + struct spl_clock_div *s_clk_div;
> + u32 val, tmp;
> +
> + arm_clk_ratio = get_arm_ratios();
> + s_clk_div = clock_get_spl_div();
> +
> + clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
> + do {
> + val = readl(&clk->mux_stat_cpu);
> + } while ((val | MUX_APLL_SEL_MASK) != val);
> +
> + clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
> + do {
> + val = readl(&clk->mux_stat_core1);
> + } while ((val | MUX_MPLL_SEL_MASK) != val);
> +
> + clrbits_le32(&clk->src_core1, MUX_CPLL_SEL_MASK);
> + clrbits_le32(&clk->src_core1, MUX_EPLL_SEL_MASK);
> + clrbits_le32(&clk->src_core1, MUX_VPLL_SEL_MASK);
> + clrbits_le32(&clk->src_core1, MUX_GPLL_SEL_MASK);
> + tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
> + | MUX_GPLL_SEL_MASK;
> + do {
> + val = readl(&clk->mux_stat_top2);
> + } while ((val | tmp) != val);
> +
> + clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
> + do {
> + val = readl(&clk->mux_stat_cdrex);
> + } while ((val | MUX_BPLL_SEL_MASK) != val);
> +
> + /* PLL locktime */
> + writel(APLL_LOCK_VAL, &clk->apll_lock);
> +
> + writel(MPLL_LOCK_VAL, &clk->mpll_lock);
> +
> + writel(BPLL_LOCK_VAL, &clk->bpll_lock);
> +
> + writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
> +
> + writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
> + do {
> + val = readl(&clk->mux_stat_cpu);
> + } while ((val | HPM_SEL_SCLK_MPLL) != val);
> +
> + val = arm_clk_ratio->arm2_ratio << 28
> + | arm_clk_ratio->apll_ratio << 24
> + | arm_clk_ratio->pclk_dbg_ratio << 20
> + | arm_clk_ratio->atb_ratio << 16
> + | arm_clk_ratio->periph_ratio << 12
> + | arm_clk_ratio->acp_ratio << 8
> + | arm_clk_ratio->cpud_ratio << 4
> + | arm_clk_ratio->arm_ratio;
> + writel(val, &clk->div_cpu0);
> + do {
> + val = readl(&clk->div_stat_cpu0);
> + } while (0 != val);
> +
> + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
> + do {
> + val = readl(&clk->div_stat_cpu1);
> + } while (0 != val);
> +
> + /* Set APLL */
> + writel(APLL_CON1_VAL, &clk->apll_con1);
> + val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
> + arm_clk_ratio->apll_sdiv);
> + writel(val, &clk->apll_con0);
> + while (readl(&clk->apll_con0) & APLL_CON0_LOCKED)
> + ;
> +
> + /* Set MPLL */
> + writel(MPLL_CON1_VAL, &clk->mpll_con1);
> + val = set_pll(s_clk_div->mpll_mdiv,
> + s_clk_div->mpll_pdiv,
> s_clk_div->mpll_sdiv);
> + writel(val, &clk->mpll_con0);
> + while (readl(&clk->mpll_con0) & MPLL_CON0_LOCKED)
> + ;
> +
> + /* Set BPLL */
> + writel(BPLL_CON1_VAL, &clk->bpll_con1);
> + val = set_pll(s_clk_div->bpll_mdiv,
> + s_clk_div->bpll_pdiv,
> s_clk_div->bpll_sdiv);
> + writel(val, &clk->bpll_con0);
> + while (readl(&clk->bpll_con0) & BPLL_CON0_LOCKED)
> + ;
> +
> + writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
> + writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
> + while (readl(&clk->div_stat_core0) != 0)
> + ;
> +
> + writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
> + while (readl(&clk->div_stat_core1) != 0)
> + ;
> +
> + writel(CLK_REG_DISABLE, &clk->src_cdrex);
> +
> + writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
> + while (readl(&clk->div_stat_cdrex))
> + ;
> +
> + val = readl(&clk->src_cpu);
> + val |= CLK_SRC_CPU_VAL;
> + writel(val, &clk->src_cpu);
> +
> + val = readl(&clk->src_core1);
> + val |= CLK_SRC_CORE1_VAL;
> + writel(val, &clk->src_core1);
> +
> + writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
> + writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
> + while (readl(&clk->div_stat_fsys0))
> + ;
> +}
> +
> +void clock_init_dp_clock(void)
> +{
> + struct exynos5_clock *clk = (struct exynos5_clock
> *)EXYNOS5_CLOCK_BASE;
> +
> + /* DP clock enable */
> + setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
> +
> + /* We run DP at 267 Mhz */
> + setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
> +}
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
More information about the U-Boot
mailing list