[U-Boot] [PATCH V7 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amar
amarendra.xt at samsung.com
Tue Mar 5 14:11:23 CET 2013
This patch enumerates dwmci and set auto stop command during
dwmci initialisation.
EMMC read/write is not happening in current implementation
due to improper fifo size computation. Hence modified the fifo size
computation to resolve EMMC read write issues.
Signed-off-by: Amar <amarendra.xt at samsung.com>
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes since V1:
1)Created the macros RX_WMARK_SHIFT and RX_WMARK_MASK in header file.
Changes since V2:
1)Updation of commit message and resubmition of proper patch set.
Changes since V3:
1)Updated to use the macro DWMCI_CTRL_SEND_AS_CCSD instead of
the hard coded value (1 << 10).
Changes since V4:
1)Updated the function dwmci_send_cmd() to use get_timer() instead
of using mdelay(1).
Changes since V5:
1)Updated in response to review comments.
Changes since V6:
No change.
drivers/mmc/dw_mmc.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..3bd1af6 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
unsigned int timeout = 100000;
u32 retry = 10000;
u32 mask, ctrl;
+ ulong start = get_timer(0);
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
- if (timeout == 0) {
+ if (get_timer(start) > timeout) {
printf("Timeout on data busy\n");
return TIMEOUT;
}
- timeout--;
}
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
if (data)
dwmci_prepare_data(host, data);
-
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
if (data)
@@ -314,7 +313,7 @@ static void dwmci_set_ios(struct mmc *mmc)
static int dwmci_init(struct mmc *mmc)
{
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
- u32 fifo_size, fifoth_val;
+ u32 fifo_size, fifoth_val, ier;
dwmci_writel(host, DWMCI_PWREN, 1);
@@ -323,6 +322,14 @@ static int dwmci_init(struct mmc *mmc)
return -1;
}
+ /* Enumerate at 400KHz */
+ dwmci_setup_bus(host, mmc->f_min);
+
+ /* Set auto stop command */
+ ier = dwmci_readl(host, DWMCI_CTRL);
+ ier |= DWMCI_CTRL_SEND_AS_CCSD;
+ dwmci_writel(host, DWMCI_CTRL, ier);
+
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
dwmci_writel(host, DWMCI_INTMASK, 0);
@@ -332,11 +339,13 @@ static int dwmci_init(struct mmc *mmc)
dwmci_writel(host, DWMCI_BMOD, 1);
fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
- if (host->fifoth_val)
+ fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+ if (host->fifoth_val) {
fifoth_val = host->fifoth_val;
- else
- fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
- TX_WMARK(fifo_size/2);
+ } else {
+ fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+ TX_WMARK(fifo_size / 2);
+ }
dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
dwmci_writel(host, DWMCI_CLKENA, 0);
--
1.8.0
More information about the U-Boot
mailing list