[U-Boot] [PATCH 3/7] powerpc/b4860qds: Add the tlb entries for SRIO interfaces

Liu Gang Gang.Liu at freescale.com
Fri Mar 8 09:41:02 CET 2013


Add the tlb entries based on the configuration of the SRIO interfaces.
Every SRIO interface has 256M space:

	#define CONFIG_SYS_SRIO1_MEM_VIRT   0xa0000000
	#define CONFIG_SYS_SRIO1_MEM_PHYS   0xc20000000ull

	#define CONFIG_SYS_SRIO2_MEM_VIRT   0xb0000000
	#define CONFIG_SYS_SRIO2_MEM_PHYS   0xc30000000ull

Signed-off-by: Liu Gang <Gang.Liu at freescale.com>
---
 board/freescale/b4860qds/tlb.c |   19 +++++++++++++++++--
 1 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
index 373cb78..6d634bf 100644
--- a/board/freescale/b4860qds/tlb.c
+++ b/board/freescale/b4860qds/tlb.c
@@ -111,8 +111,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 #ifdef CONFIG_SYS_NAND_BASE
 	/*
 	 * *I*G - NAND
-	 * entry 14 and 15 has been used hard coded, they will be disabled
-	 * in cpu_init_f, so we use entry 16 for nand.
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -122,6 +120,23 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 12, BOOKE_PAGESZ_4K, 1),
 
+	/*
+	 * *I*G - SRIO
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for SRIO2.
+	 */
+#ifdef CONFIG_SYS_SRIO1_MEM_PHYS
+	/* *I*G* - SRIO1 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO1_MEM_VIRT, CONFIG_SYS_SRIO1_MEM_PHYS,
+		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_256M, 1),
+#endif
+#ifdef CONFIG_SYS_SRIO2_MEM_PHYS
+	/* *I*G* - SRIO2 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO2_MEM_VIRT, CONFIG_SYS_SRIO2_MEM_PHYS,
+		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 16, BOOKE_PAGESZ_256M, 1),
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
-- 
1.7.1




More information about the U-Boot mailing list