[U-Boot] [RFC PATCH] Add support for Boundary Devices Nitrogen6x boards

[Fabio Estevam]

Hi Eric,

On Wed, Jan 30, 2013 at 4:10 PM, Eric Nelson
<eric.nelson at boundarydevices.com> wrote:
> This patch adds support for the Nitrogen6X board(s) from
> Boundary Devices. The boards are based on the i.MX6x
> processor family with two major variants:
>         i.MX6Quad/6Dual
>         i.MX6Dual-Lite/6Solo
....
>  board/boundary/nitrogen6x/800mhz_2x128mx16.cfg     |   37 +
>  board/boundary/nitrogen6x/800mhz_2x256mx16.cfg     |   37 +
>  board/boundary/nitrogen6x/800mhz_4x128mx16.cfg     |   37 +
>  board/boundary/nitrogen6x/800mhz_4x256mx16.cfg     |   37 +

Good work, I really like this series.

I managed to test it and added support for a mx6dl board.

I would like to suggest if you could move the different memory inits
(like 800mhz_4x256mx16.cfg) into a common directory so that other
boards can pull their DDR init from there when possible.

Do you think we still can make this go into 2013.04?

Thanks,

Fabio Estevam