[U-Boot] [v3 PATCH] mpc5200: Add a4m2k board port

[Wolfgang Denk]

Dear Stefan Roese,

In message <1360239011-1852-1-git-send-email-sr at denx.de> you wrote:
> This patch adds the a4m2k MPC5200B board port. Its a derivate of
> the a3m071 board with only minor changes.
> 
> Additionally this patch includes some clean-up changes:
> - Remove I2C support from a3m071 as its unused
> - Fix/enhance default env variables
> - Fix some comments
> - Add newly introduced CONFIG_SPL_TARGET to automatically build
>   "u-boot-img.bin"
> - Fix dtb patching in READ desciption for SPL Linux booting:
>   "fdt chosen" needs to get called to patch/create the chosen node.
> - Add missing call to spl_board_init():
>   Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get
>   called in the SPL version.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> ---
> v3:
> - Fix dtb patching in READ desciption for SPL Linux booting
> - Add missing call to spl_board_init()
> 
> v2:
> - Enable CAN1 on I2C in GPS Port Configuration for a4m2k
> 
>  MAINTAINERS                |   1 +
>  board/a3m071/README        |   2 +-
>  board/a3m071/a3m071.c      |  91 +++++++++++++++++++++++++++++++++---
>  board/a3m071/is46r16320d.h |  35 ++++++++++++++
>  boards.cfg                 |   1 +
>  include/configs/a3m071.h   | 113 ++++++++++++++++++++++++++-------------------
>  6 files changed, 188 insertions(+), 55 deletions(-)
>  create mode 100644 board/a3m071/is46r16320d.h

Applied to u-boot-mpc5xxx repo, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Commitment, n.:      Commitment can be illustrated by a breakfast
of ham and eggs. The chicken was involved, the pig was committed.