[U-Boot] [PATCH v4 4/5] usb: Add multiple controllers support for EHCI PCI

Simon Glass sjg at chromium.org
Mon Mar 11 23:16:19 CET 2013


From: Vincent Palatin <vpalatin at chromium.org>

Use the ability to have several active EHCI controller on a system
in the PCI EHCI controller implementation.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v4:
- Add errno.h header file to ehci-pci

Changes in v3: None
Changes in v2:
- Add blank line before function return

 drivers/usb/host/ehci-pci.c | 53 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 47 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 29af02d..c1ff8fc 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -19,6 +19,7 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <pci.h>
 #include <usb.h>
 
@@ -32,30 +33,70 @@ static struct pci_device_id ehci_pci_ids[] = {
 	{0x12D8, 0x400F},	/* Pericom */
 	{0, 0}
 };
+#else
+static pci_dev_t ehci_find_class(int index)
+{
+	int bus;
+	int devnum;
+	pci_dev_t bdf;
+	uint32_t class;
+
+	for (bus = 0; bus <= pci_last_busno(); bus++) {
+		for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) {
+			pci_read_config_dword(PCI_BDF(bus, devnum, 0),
+					      PCI_CLASS_REVISION, &class);
+			if (class >> 16 == 0xffff)
+				continue;
+
+			for (bdf = PCI_BDF(bus, devnum, 0);
+					bdf <= PCI_BDF(bus, devnum,
+						PCI_MAX_PCI_FUNCTIONS - 1);
+					bdf += PCI_BDF(0, 0, 1)) {
+				pci_read_config_dword(bdf, PCI_CLASS_REVISION,
+						      &class);
+				if ((class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
+						&& !index--)
+					return bdf;
+			}
+		}
+	}
+
+	return -ENODEV;
+}
 #endif
 
 /*
  * Create the appropriate control structures to manage
  * a new EHCI host controller.
  */
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+		struct ehci_hcor **ret_hcor)
 {
 	pci_dev_t pdev;
+	struct ehci_hccr *hccr;
+	struct ehci_hcor *hcor;
 
+#ifdef CONFIG_PCI_EHCI_DEVICE
 	pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
+#else
+	pdev = ehci_find_class(index);
+#endif
 	if (pdev == -1) {
 		printf("EHCI host controller not found\n");
 		return -1;
 	}
 
-	*hccr = (struct ehci_hccr *)pci_map_bar(pdev,
+	hccr = (struct ehci_hccr *)pci_map_bar(pdev,
 			PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
-			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+	hcor = (struct ehci_hcor *)((uint32_t) hccr +
+			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 
 	debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
-			(uint32_t)*hccr, (uint32_t)*hcor,
-			(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+			(uint32_t)hccr, (uint32_t)hcor,
+			(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	*ret_hccr = hccr;
+	*ret_hcor = hcor;
 
 	return 0;
 }
-- 
1.8.1.3



More information about the U-Boot mailing list