[U-Boot] [PATCH 0/4] Tegra114: MMC: Add MMC driver for T114/Dalmore

[Tom Warren]

This patchset adds SDMMC device-tree support to the Tegra114 dts files,
and enables the Tegra MMC driver on Tegra114 Dalmore.

Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load
a kernel off of a SD card OK, card detect works, and the env is now
stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).
   
Tom Warren (4):
  Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for
    now)
  Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
  Tegra114: MMC: Add SD bus power-rail init routine
  Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
    boards

 arch/arm/dts/tegra114.dtsi                      |   32 +++++++++
 arch/arm/include/asm/arch-tegra114/gp_padctrl.h |    7 ++
 board/nvidia/dalmore/dalmore.c                  |   79 +++++++++++++++++++++++
 board/nvidia/dalmore/pinmux-config-dalmore.h    |    2 +
 board/nvidia/dts/tegra114-dalmore.dts           |   13 ++++
 include/configs/dalmore.h                       |   12 +++-
 6 files changed, 144 insertions(+), 1 deletions(-)