[U-Boot] [PATCH 2/4] Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table

[Stephen Warren]

On 03/12/2013 10:17 AM, Tom Warren wrote:
> SDIO1 (the SD-card slot on Dalmore) needs to have its pads setup
> before the MMC driver is added.

> diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c

> +	/* Initialize any non-default pad configs (APB_MISC_GP regs) */
> +	padgrp_config_table(dalmore_padctrl, ARRAY_SIZE(dalmore_padctrl));

Given that you're only using this table for the very first time here ...

> diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h

>  static struct padctrl_config dalmore_padctrl[] = {
>  	/* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
> +	DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
> +		SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, ENABLE),
>  };

... and it was empty before now, I'd be inclined to remove the *dalmore*
files from the Tegra114 pinmux series that implemented
padgrp_config_table(), and just do all the Dalmore-specific stuff in
this patch.

But it's not a big deal.