[U-Boot] [PATCH] power: twl6035: cleanup register access API

[Nishanth Menon]

commit 21144298 (power: twl6035: add palmas PMIC support)
introduced twl6035_i2c_[read|write]_u8
Then, commit dd23e59d (omap5: pbias ldo9 turn on)
introduced palmas_[read|write]_u8
for precisely the same access function. TWL6035 belongs to
the palmas family, so instead of having an palmas API,
we could use twl6035 API instead (which is used elsewhere
as well).

Account for the parameter change while doing the change and
remove palmas register accessors.

Cc: Balaji T K <balajitk at ti.com>
Cc: Sricharan R <r.sricharan at ti.com>
Reported-by: Ruchika Kharwar <ruchika at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
 drivers/power/twl6035.c |   15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/power/twl6035.c b/drivers/power/twl6035.c
index d3de698..b0b2406 100644
--- a/drivers/power/twl6035.c
+++ b/drivers/power/twl6035.c
@@ -34,17 +34,6 @@ int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
 	return i2c_read(chip_no, reg, 1, val, 1);
 }
 
-/* To align with i2c mw/mr address, reg, val command syntax */
-static inline int palmas_write_u8(u8 chip_no, u8 reg, u8 val)
-{
-	return i2c_write(chip_no, reg, 1, &val, 1);
-}
-
-static inline int palmas_read_u8(u8 chip_no, u8 reg, u8 *val)
-{
-	return i2c_read(chip_no, reg, 1, val, 1);
-}
-
 void twl6035_init_settings(void)
 {
 	return;
@@ -57,7 +46,7 @@ int twl6035_mmc1_poweron_ldo(void)
 	/* set LDO9 TWL6035 to 3V */
 	val = 0x2b; /* (3 -.9)*28 +1 */
 
-	if (palmas_write_u8(0x48, LDO9_VOLTAGE, val)) {
+	if (twl6035_i2c_write_u8(0x48, val, LDO9_VOLTAGE)) {
 		printf("twl6035: could not set LDO9 voltage.\n");
 		return 1;
 	}
@@ -65,7 +54,7 @@ int twl6035_mmc1_poweron_ldo(void)
 	/* TURN ON LDO9 */
 	val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE;
 
-	if (palmas_write_u8(0x48, LDO9_CTRL, val)) {
+	if (twl6035_i2c_write_u8(0x48, val, LDO9_CTRL)) {
 		printf("twl6035: could not turn on LDO9.\n");
 		return 1;
 	}
-- 
1.7.9.5