[U-Boot] [RFC] net: macb: using AT91FAMILY replace #defined

Bo Shen voice.shen at atmel.com
Wed Mar 13 08:04:26 CET 2013


Using CONFIG_AT91FAMILY replace many #defined for atmel SoC

Signed-off-by: Bo Shen <voice.shen at atmel.com>
---
 drivers/net/macb.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 8bacbda..753fb96 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -466,19 +466,13 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 
 	/* choose RMII or MII mode. This depends on the board */
 #ifdef CONFIG_RMII
-#if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
-	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
-	defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
+#ifdef CONFIG_AT91FAMILY
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
 #endif
 #else
-#if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
-	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
-	defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
+#ifdef CONFIG_AT91FAMILY
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));
-- 
1.7.9.5



More information about the U-Boot mailing list