[U-Boot] [PATCH v2 1/3] am335x_evm: add support for BeagleBone Black DT name

[Koen Kooi]

Op 13 mrt. 2013, om 16:07 heeft Nishanth Menon <nm at ti.com> het volgende geschreven:

> On 16:05-20130313, Koen Kooi wrote:
>> 
>> Op 13 mrt. 2013, om 16:02 heeft Nishanth Menon <nm at ti.com> het volgende geschreven:
>> 
>>> On Wed, Mar 13, 2013 at 9:57 AM, Koen Kooi <koen at dominion.thruhere.net> wrote:
>>>> 
>>>> Op 13 mrt. 2013, om 15:35 heeft Nishanth Menon <nm at ti.com> het volgende geschreven:
>>>> 
>>>>> On 10:20-20130313, Tom Rini wrote:
>>>>>> From: Koen Kooi <koen at dominion.thruhere.net>
>>>>>> 
>>>>>> Signed-off-by: Koen Kooi <koen at dominion.thruhere.net>
>>>>>> Acked-by: Peter Korsgaard <jacmet at sunsite.dk>
>>>>>> ---
>>>>>> include/configs/am335x_evm.h |    2 ++
>>>>>> 1 file changed, 2 insertions(+)
>>>>>> 
>>>>>> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
>>>>>> index 33ee2c4..abf4e39 100644
>>>>>> --- a/include/configs/am335x_evm.h
>>>>>> +++ b/include/configs/am335x_evm.h
>>>>>> @@ -87,6 +87,8 @@
>>>>>>    "findfdt="\
>>>>>>            "if test $board_name = A335BONE; then " \
>>>>>>                    "setenv fdtfile am335x-bone.dtb; fi; " \
>>>>>> +            "if test $board_name = A335BNLT; then " \
>>>>>> +                    "setenv fdtfile am335x-bonelt.dtb; fi; " \
>>>>> could we not use am335x-boneblack.dtb instead?
>>>> 
>>>> it's bonelt in the kernel, so boneblack would fail to load a dtb
>>> $ git describe
>>> v3.9-rc2
>>> $ ls arch/arm/boot/dts/*bone*.dts*
>>> arch/arm/boot/dts/am335x-bone.dts
>>> ???
>> 
>> What a surprise, missing stuff in mainline! It's present in the vendor kernel, which is what is shipping with the board.
> No surprise there as marketing names are finalized close to product
> launches. If there is an vendor u-boot, it can remain in sync with what
> ever the vendor kernel is. If it is upstream, we might want to think
> longterm.

I'm in charge of pushing the am335x-bonelt.dts upstream to Linus and I'd like to keep everything in sync. I'm not fond of renaming it again, the EEPROM says BNLT, not BNB :)