[U-Boot] [PATCH] am335x: Enable DDR PHY dynamic power down bit for DDR3 boards

[Vaibhav Hiremath]

Enable DDR PHY dynamic power down bit, which enables
powering down the IO receiver when not performing read.

This also helps in reducing overall power consumption in
low power states (suspend/standby).

Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
Signed-off-by: Satyanarayana, Sandhya <sandhya.satyanarayana at ti.com>
Cc: Tom Rini <trini at ti.com>
---
 arch/arm/include/asm/arch-am33xx/ddr_defs.h |    1 +
 board/ti/am335x/board.c                     |    6 ++++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index ae43ef8..7ab3baf 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -28,6 +28,7 @@
 #define VTP_CTRL_START_EN	(0x1)
 #define PHY_DLL_LOCK_DIFF	0x0
 #define DDR_CKE_CTRL_NORMAL	0x1
+#define PHY_EN_DYN_PWRDN	(0x1 << 20)
 
 /* Micron MT47H128M16RT-25E */
 #define MT47H128M16RT25E_EMIF_READ_LATENCY	0x100005
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 48e6896..22d7b25 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -251,7 +251,8 @@ static struct emif_regs ddr3_emif_reg_data = {
 	.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
 	.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
 	.zq_config = MT41J128MJT125_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 
 static struct emif_regs ddr3_evm_emif_reg_data = {
@@ -261,7 +262,8 @@ static struct emif_regs ddr3_evm_emif_reg_data = {
 	.sdram_tim2 = MT41J512M8RH125_EMIF_TIM2,
 	.sdram_tim3 = MT41J512M8RH125_EMIF_TIM3,
 	.zq_config = MT41J512M8RH125_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 #endif
 
-- 
1.7.0.4