[U-Boot] [PATCH] Exynos: clock: Fix a bug in PLL lock check condition

[Akshay Saraswat]

The condition for testing of PLL getting locked was incorrect. Rectify
this error in this patch.

Reported-by: Alexei Fedorov <alexie.fedorov at arm.com>
Signed-off-by: Hatim Ali <hatim.rv at samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
 board/samsung/smdk5250/clock_init.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
index c009ae5..baa3042 100644
--- a/board/samsung/smdk5250/clock_init.c
+++ b/board/samsung/smdk5250/clock_init.c
@@ -494,35 +494,35 @@ void system_clock_init()
 	val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
 			arm_clk_ratio->apll_sdiv);
 	writel(val, &clk->apll_con0);
-	while (readl(&clk->apll_con0) & APLL_CON0_LOCKED)
+	while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set MPLL */
 	writel(MPLL_CON1_VAL, &clk->mpll_con1);
 	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
 	writel(val, &clk->mpll_con0);
-	while (readl(&clk->mpll_con0) & MPLL_CON0_LOCKED)
+	while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set BPLL */
 	writel(BPLL_CON1_VAL, &clk->bpll_con1);
 	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
 	writel(val, &clk->bpll_con0);
-	while (readl(&clk->bpll_con0) & BPLL_CON0_LOCKED)
+	while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set CPLL */
 	writel(CPLL_CON1_VAL, &clk->cpll_con1);
 	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
 	writel(val, &clk->cpll_con0);
-	while (readl(&clk->cpll_con0) & CPLL_CON0_LOCKED)
+	while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set GPLL */
 	writel(GPLL_CON1_VAL, &clk->gpll_con1);
 	val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
 	writel(val, &clk->gpll_con0);
-	while (readl(&clk->gpll_con0) & GPLL_CON0_LOCKED)
+	while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set EPLL */
@@ -530,7 +530,7 @@ void system_clock_init()
 	writel(EPLL_CON1_VAL, &clk->epll_con1);
 	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
 	writel(val, &clk->epll_con0);
-	while (readl(&clk->epll_con0) & EPLL_CON0_LOCKED)
+	while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set VPLL */
@@ -538,7 +538,7 @@ void system_clock_init()
 	writel(VPLL_CON1_VAL, &clk->vpll_con1);
 	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
 	writel(val, &clk->vpll_con0);
-	while (readl(&clk->vpll_con0) & VPLL_CON0_LOCKED)
+	while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
 		;
 
 	writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
-- 
1.8.0