[U-Boot] [PATCH 1/2] nitrogen6x: Pass the correct CPU revision to the kernel

[Eric Nelson]

On 03/15/2013 02:06 PM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> As nitrogen6x boards support different i.MX6 flavors (quad, dual-lite and solo)
> the correct CPU revision needs to passed to the kernel, so call get_cpu_rev()
> instead of hardcoding it.
>
> Freescale 3.0.35 kernel assumes that the CPU revision is passed passed from the
> bootloader.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>   board/boundary/nitrogen6x/nitrogen6x.c |    2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
> index 229c237..fec0e3a 100644
> --- a/board/boundary/nitrogen6x/nitrogen6x.c
> +++ b/board/boundary/nitrogen6x/nitrogen6x.c
> @@ -330,7 +330,7 @@ int board_mmc_init(bd_t *bis)
>
>   u32 get_board_rev(void)
>   {
> -	return 0x63000;
> +	return get_cpu_rev();
>   }
>
>   #ifdef CONFIG_MXC_SPI
>

This is the **board** revision, right?

At first glance, the kernel seems to be getting the silicon revision
from the same place as get_cpu_rev():
	https://github.com/boundarydevices/linux-imx6/blob/boundary-imx_3.0.35_1.1.1/arch/arm/mach-mx6/cpu.c#L51
	http://git.denx.de/u-boot.git/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/mx6/soc.c;h=a8aad5dd0a6c8548277021ebe8f6e159dbf31b9b;hb=HEAD#l42

Is there a reference to the ATAG that I'm not seeing somewhere?

Please advise,


Eric