[U-Boot] [PATCH v5 2/3] mx6qsabresd: Fix card detection for invalid card id case

Otavio Salvador otavio at ossystems.com.br
Sat Mar 16 19:05:06 CET 2013


This changes the code so in case an unkown value is passed it will
return as invalid.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
Changes in v5: None
Changes in v4:
- Fix switch code to proper break (Stefano)

Changes in v3: None
Changes in v2:
- Rework code to use a 'ret' variable (Fabio)

 board/freescale/mx6qsabresd/mx6qsabresd.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 5ebbff3..d3019e9 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -145,15 +145,21 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = {
 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
 
 	switch (cfg->esdhc_base) {
 	case USDHC2_BASE_ADDR:
-		return !gpio_get_value(USDHC2_CD_GPIO);
+		ret = !gpio_get_value(USDHC2_CD_GPIO);
+		break;
 	case USDHC3_BASE_ADDR:
-		return !gpio_get_value(USDHC3_CD_GPIO);
-	default:
-		return 1; /* eMMC/uSDHC4 is always present */
+		ret = !gpio_get_value(USDHC3_CD_GPIO);
+		break;
+	case USDHC4_BASE_ADDR:
+		ret = 1; /* eMMC/uSDHC4 is always present */
+		break;
 	}
+
+	return ret;
 }
 
 int board_mmc_init(bd_t *bis)
-- 
1.8.1



More information about the U-Boot mailing list