[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

Hi Bo 

Thanks a lot for your help. 

Best regards 

MArcio 

On
Sat, 16 Mar 2013 19:46:06 -0700 (PDT), Bo Shen [via U-Boot] wrote: 

>
Hi Marcio, 
> This is not u-boot related, I think you should post this
issue to 
> Linux kernel mailing list. 
> 
> On 03/16/2013 10:58 PM,
[hidden email] wrote: 
> 
> [Snip] 
> 
>> NAND device: Manufacturer ID:
0x2c, Chip 
>> ID: 0xba (Micron NAND 256MiB 1,8V 16-bi 
>> t) 
>>
Scanning device for bad 
>> blocks 
>> Bad eraseblock 40 at
0x000000500000 
>> Bad eraseblock 41 at 
>> 0x000000520000 
>> Bad
eraseblock 800 at 0x000006400000 
>> Bad eraseblock 801 
>> at
0x000006420000 
>> Creating 3 MTD partitions on 
>> "atmel_nand": 
>>
0x000000000000-0x000000500000 : 
>> "Bootstrap" 
>>
0x000000500000-0x000006400000 : 
>> "system" 
>>
0x000006400000-0x000010000000 : "userdata" 
>> UBI: attaching mtd1 
>>
to ubi0 
>> UBI: physical eraseblock size: 131072 bytes (128 KiB) 
>>
UBI: 
>> logical eraseblock size: 129024 bytes 
>> UBI: smallest flash
I/O unit: 
>> 2048 
>> UBI: sub-page size: 512 
>> UBI: VID header
offset: 512 (aligned 
>> 512) 
>> UBI: data offset: 2048 
> I check the
NAND flash spec and find you may use wrong 
> parameters for generating
UBIFS image. 
> 
> --->8--- 
> Page size x16: 1056 words (1024 + 32
words) 
> ---
> and no sub-page. 
> 
> So, I think mini I/O unit should
be 1024 x 4 = 4096 Bytes 
> 
>> uncorrectable error : 
>> uncorrectable
error 
>> : 
>> uncorrectable error : 
>> uncorrectable error : 
>> UBI
error: ubi_io_read: 
>> error -74 (ECC error) while reading 64 bytes
from PEB 2: 
>> 0, read 64 
>> bytes 
> 
> This is ECC error, I think
you should also update 
> the driver for atmel_nand.c (mainly ECC
layout) 
> 
> Best Regards, 
> Bo Shen 
> 
>
_______________________________________________ 
> U-Boot mailing list

> [hidden email] 
> http://lists.denx.de/mailman/listinfo/u-boot [1]
>

> -------------------------
> 
> If you reply to this email, your
message will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149902.html
[2] 
> To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
> NAML [4]

  

Links:
------
[1]
http://lists.denx.de/mailman/listinfo/u-boot
[2]
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149902.html
[3]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code|+|amp|+|node=149567|+|amp|+|code=bWFyY2lvQG5ldG9wZW4uY29tLmJyfDE0OTU2N3wxMDMwNzQyMzcx
[4]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer|+|amp|+|id=instant_html%21nabble%3Aemail.naml|+|amp|+|base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace|+|amp|+|breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149918.html
Sent from the U-Boot mailing list archive at Nabble.com.