[U-Boot] [PATCH 1/4 v7] Exynos: Add hardware accelerated SHA256 and SHA1

Akshay Saraswat akshay.s at samsung.com
Mon Mar 18 07:06:15 CET 2013


SHA-256 and SHA-1 accelerated using ACE hardware.

Signed-off-by: ARUN MANKUZHI <arun.m at samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes since v1:
	- Moved code to drivers/crypto.
	- Fixed few other nits.

Changes since v2:
	- Added falling back to software sha256 in case length exceeds buffer limit.
	- Reduced one tab at lines 533, 559 and 571 in this patch.
	- Removed space after a cast at line 506 in this patch.
	- Removed blank line at line 561 in this patch.
	- Removed space before semicolon at line 576 in this patch.

Changes since v3:
	- Removed buffer limit since there are 2 regs for address hash_msg_size_high and low.
	  That means buffer length could go upto 2^64 bits which is practically
	- Removed falling back to software sha256 because there is no buffer limit.
	- Removed "/ 4" to sha1 and sha256 lengths and added increment to 4 in for
	  loop at line 573.
	- Timed out still kept to be 100 ms since this is enough for hardware to switch
	  status to idle from busy.
	  In case it couldn't that means h/w is faulty.

Changes since v4:
	- Added include for clk.h.
	- Added define for MAX_FREQ.
	- Added timeout calculation as per frequency.
	- Changed "i+=4" to "i++" and "len" to "len/4" in for loop at line 591 in this patch.
	- Added two new functions ace_sha256 and ace_sha1.

Changes since v5:
	- Removed ace_sha.h.
	- Renamed ace_sfr.h as ace_sha.h.
	- Removed timeout and checking for PRNG_ERROR bit in HASH_STATUS register.
	  PRNG_ERROR bit high means setup was not done properly. Since there is no
	  way to detect faulty h/w, we consider the possible fact that h/w should
	  not be able to setup feed properly if it's faulty.
	- Renamed function name ace_sha256 to hw_sha256 and ace_sha1 to hw_sha1.

Changes since v6:
	- Added "Acked-by: Simon Glass <sjg at chromium.org>".

 Makefile                                   |   1 +
 arch/arm/include/asm/arch-exynos/ace_sha.h | 327 +++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h     |   4 +
 drivers/crypto/Makefile                    |  47 +++++
 drivers/crypto/ace_sha.c                   | 129 ++++++++++++
 5 files changed, 508 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-exynos/ace_sha.h
 create mode 100644 drivers/crypto/Makefile
 create mode 100644 drivers/crypto/ace_sha.c

diff --git a/Makefile b/Makefile
index 55bd55c..54f86d8 100644
--- a/Makefile
+++ b/Makefile
@@ -273,6 +273,7 @@ LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
 LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
diff --git a/arch/arm/include/asm/arch-exynos/ace_sha.h b/arch/arm/include/asm/arch-exynos/ace_sha.h
new file mode 100644
index 0000000..259f3d9
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/ace_sha.h
@@ -0,0 +1,327 @@
+/*
+ * Header file for Advanced Crypto Engine - SFR definitions
+ *
+ * Copyright (c) 2012  Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ACE_SHA_H
+#define __ACE_SHA_H
+
+struct exynos_ace_sfr {
+	unsigned int	fc_intstat;	/* base + 0 */
+	unsigned int	fc_intenset;
+	unsigned int	fc_intenclr;
+	unsigned int	fc_intpend;
+	unsigned int	fc_fifostat;
+	unsigned int	fc_fifoctrl;
+	unsigned int	fc_global;
+	unsigned int	res1;
+	unsigned int	fc_brdmas;
+	unsigned int	fc_brdmal;
+	unsigned int	fc_brdmac;
+	unsigned int	res2;
+	unsigned int	fc_btdmas;
+	unsigned int	fc_btdmal;
+	unsigned int	fc_btdmac;
+	unsigned int	res3;
+	unsigned int	fc_hrdmas;
+	unsigned int	fc_hrdmal;
+	unsigned int	fc_hrdmac;
+	unsigned int	res4;
+	unsigned int	fc_pkdmas;
+	unsigned int	fc_pkdmal;
+	unsigned int	fc_pkdmac;
+	unsigned int	fc_pkdmao;
+	unsigned char   res5[0x1a0];
+
+	unsigned int	aes_control;	/* base + 0x200 */
+	unsigned int	aes_status;
+	unsigned char	res6[0x8];
+	unsigned int	aes_in[4];
+	unsigned int	aes_out[4];
+	unsigned int	aes_iv[4];
+	unsigned int	aes_cnt[4];
+	unsigned char   res7[0x30];
+	unsigned int	aes_key[8];
+	unsigned char   res8[0x60];
+
+	unsigned int	tdes_control;	/* base + 0x300 */
+	unsigned int	tdes_status;
+	unsigned char   res9[0x8];
+	unsigned int	tdes_key[6];
+	unsigned int	tdes_iv[2];
+	unsigned int	tdes_in[2];
+	unsigned int	tdes_out[2];
+	unsigned char   res10[0xc0];
+
+	unsigned int	hash_control;	/* base + 0x400 */
+	unsigned int	hash_control2;
+	unsigned int	hash_fifo_mode;
+	unsigned int	hash_byteswap;
+	unsigned int	hash_status;
+	unsigned char   res11[0xc];
+	unsigned int	hash_msgsize_low;
+	unsigned int	hash_msgsize_high;
+	unsigned int	hash_prelen_low;
+	unsigned int	hash_prelen_high;
+	unsigned int	hash_in[16];
+	unsigned int	hash_key_in[16];
+	unsigned int	hash_iv[8];
+	unsigned char   res12[0x30];
+	unsigned int	hash_result[8];
+	unsigned char   res13[0x20];
+	unsigned int	hash_seed[8];
+	unsigned int	hash_prng[8];
+	unsigned char   res14[0x180];
+
+	unsigned int	pka_sfr[5];		/* base + 0x700 */
+};
+
+/* ACE_FC_INT */
+#define ACE_FC_PKDMA			(1 << 0)
+#define ACE_FC_HRDMA			(1 << 1)
+#define ACE_FC_BTDMA			(1 << 2)
+#define ACE_FC_BRDMA			(1 << 3)
+#define ACE_FC_PRNG_ERROR		(1 << 4)
+#define ACE_FC_MSG_DONE			(1 << 5)
+#define ACE_FC_PRNG_DONE		(1 << 6)
+#define ACE_FC_PARTIAL_DONE		(1 << 7)
+
+/* ACE_FC_FIFOSTAT */
+#define ACE_FC_PKFIFO_EMPTY		(1 << 0)
+#define ACE_FC_PKFIFO_FULL		(1 << 1)
+#define ACE_FC_HRFIFO_EMPTY		(1 << 2)
+#define ACE_FC_HRFIFO_FULL		(1 << 3)
+#define ACE_FC_BTFIFO_EMPTY		(1 << 4)
+#define ACE_FC_BTFIFO_FULL		(1 << 5)
+#define ACE_FC_BRFIFO_EMPTY		(1 << 6)
+#define ACE_FC_BRFIFO_FULL		(1 << 7)
+
+/* ACE_FC_FIFOCTRL */
+#define ACE_FC_SELHASH_MASK		(3 << 0)
+#define ACE_FC_SELHASH_EXOUT		(0 << 0)	/* independent source */
+#define ACE_FC_SELHASH_BCIN		(1 << 0)	/* blk cipher input */
+#define ACE_FC_SELHASH_BCOUT		(2 << 0)	/* blk cipher output */
+#define ACE_FC_SELBC_MASK		(1 << 2)
+#define ACE_FC_SELBC_AES		(0 << 2)	/* AES */
+#define ACE_FC_SELBC_DES		(1 << 2)	/* DES */
+
+/* ACE_FC_GLOBAL */
+#define ACE_FC_SSS_RESET		(1 << 0)
+#define ACE_FC_DMA_RESET		(1 << 1)
+#define ACE_FC_AES_RESET		(1 << 2)
+#define ACE_FC_DES_RESET		(1 << 3)
+#define ACE_FC_HASH_RESET		(1 << 4)
+#define ACE_FC_AXI_ENDIAN_MASK		(3 << 6)
+#define ACE_FC_AXI_ENDIAN_LE		(0 << 6)
+#define ACE_FC_AXI_ENDIAN_BIBE		(1 << 6)
+#define ACE_FC_AXI_ENDIAN_WIBE		(2 << 6)
+
+/* Feed control - BRDMA control */
+#define ACE_FC_BRDMACFLUSH_OFF		(0 << 0)
+#define ACE_FC_BRDMACFLUSH_ON		(1 << 0)
+#define ACE_FC_BRDMACSWAP_ON		(1 << 1)
+#define ACE_FC_BRDMACARPROT_MASK	(0x7 << 2)
+#define ACE_FC_BRDMACARPROT_OFS		(2)
+#define ACE_FC_BRDMACARCACHE_MASK	(0xf << 5)
+#define ACE_FC_BRDMACARCACHE_OFS	(5)
+
+/* Feed control - BTDMA control */
+#define ACE_FC_BTDMACFLUSH_OFF		(0 << 0)
+#define ACE_FC_BTDMACFLUSH_ON		(1 << 0)
+#define ACE_FC_BTDMACSWAP_ON		(1 << 1)
+#define ACE_FC_BTDMACAWPROT_MASK	(0x7 << 2)
+#define ACE_FC_BTDMACAWPROT_OFS		(2)
+#define ACE_FC_BTDMACAWCACHE_MASK	(0xf << 5)
+#define ACE_FC_BTDMACAWCACHE_OFS	(5)
+
+/* Feed control - HRDMA control */
+#define ACE_FC_HRDMACFLUSH_OFF		(0 << 0)
+#define ACE_FC_HRDMACFLUSH_ON		(1 << 0)
+#define ACE_FC_HRDMACSWAP_ON		(1 << 1)
+#define ACE_FC_HRDMACARPROT_MASK	(0x7 << 2)
+#define ACE_FC_HRDMACARPROT_OFS		(2)
+#define ACE_FC_HRDMACARCACHE_MASK	(0xf << 5)
+#define ACE_FC_HRDMACARCACHE_OFS	(5)
+
+/* Feed control - PKDMA control */
+#define ACE_FC_PKDMACBYTESWAP_ON	(1 << 3)
+#define ACE_FC_PKDMACDESEND_ON		(1 << 2)
+#define ACE_FC_PKDMACTRANSMIT_ON	(1 << 1)
+#define ACE_FC_PKDMACFLUSH_ON		(1 << 0)
+
+/* Feed control - PKDMA offset */
+#define ACE_FC_SRAMOFFSET_MASK		(0xfff)
+
+/* AES control */
+#define ACE_AES_MODE_MASK		(1 << 0)
+#define ACE_AES_MODE_ENC		(0 << 0)
+#define ACE_AES_MODE_DEC		(1 << 0)
+#define ACE_AES_OPERMODE_MASK		(3 << 1)
+#define ACE_AES_OPERMODE_ECB		(0 << 1)
+#define ACE_AES_OPERMODE_CBC		(1 << 1)
+#define ACE_AES_OPERMODE_CTR		(2 << 1)
+#define ACE_AES_FIFO_MASK		(1 << 3)
+#define ACE_AES_FIFO_OFF		(0 << 3)	/* CPU mode */
+#define ACE_AES_FIFO_ON			(1 << 3)	/* FIFO mode */
+#define ACE_AES_KEYSIZE_MASK		(3 << 4)
+#define ACE_AES_KEYSIZE_128		(0 << 4)
+#define ACE_AES_KEYSIZE_192		(1 << 4)
+#define ACE_AES_KEYSIZE_256		(2 << 4)
+#define ACE_AES_KEYCNGMODE_MASK		(1 << 6)
+#define ACE_AES_KEYCNGMODE_OFF		(0 << 6)
+#define ACE_AES_KEYCNGMODE_ON		(1 << 6)
+#define ACE_AES_SWAP_MASK		(0x1f << 7)
+#define ACE_AES_SWAPKEY_OFF		(0 << 7)
+#define ACE_AES_SWAPKEY_ON		(1 << 7)
+#define ACE_AES_SWAPCNT_OFF		(0 << 8)
+#define ACE_AES_SWAPCNT_ON		(1 << 8)
+#define ACE_AES_SWAPIV_OFF		(0 << 9)
+#define ACE_AES_SWAPIV_ON		(1 << 9)
+#define ACE_AES_SWAPDO_OFF		(0 << 10)
+#define ACE_AES_SWAPDO_ON		(1 << 10)
+#define ACE_AES_SWAPDI_OFF		(0 << 11)
+#define ACE_AES_SWAPDI_ON		(1 << 11)
+#define ACE_AES_COUNTERSIZE_MASK	(3 << 12)
+#define ACE_AES_COUNTERSIZE_128		(0 << 12)
+#define ACE_AES_COUNTERSIZE_64		(1 << 12)
+#define ACE_AES_COUNTERSIZE_32		(2 << 12)
+#define ACE_AES_COUNTERSIZE_16		(3 << 12)
+
+/* AES status */
+#define ACE_AES_OUTRDY_MASK		(1 << 0)
+#define ACE_AES_OUTRDY_OFF		(0 << 0)
+#define ACE_AES_OUTRDY_ON		(1 << 0)
+#define ACE_AES_INRDY_MASK		(1 << 1)
+#define ACE_AES_INRDY_OFF		(0 << 1)
+#define ACE_AES_INRDY_ON		(1 << 1)
+#define ACE_AES_BUSY_MASK		(1 << 2)
+#define ACE_AES_BUSY_OFF		(0 << 2)
+#define ACE_AES_BUSY_ON			(1 << 2)
+
+/* TDES control */
+#define ACE_TDES_MODE_MASK		(1 << 0)
+#define ACE_TDES_MODE_ENC		(0 << 0)
+#define ACE_TDES_MODE_DEC		(1 << 0)
+#define ACE_TDES_OPERMODE_MASK		(1 << 1)
+#define ACE_TDES_OPERMODE_ECB		(0 << 1)
+#define ACE_TDES_OPERMODE_CBC		(1 << 1)
+#define ACE_TDES_SEL_MASK		(3 << 3)
+#define ACE_TDES_SEL_DES		(0 << 3)
+#define ACE_TDES_SEL_TDESEDE		(1 << 3)	/* TDES EDE mode */
+#define ACE_TDES_SEL_TDESEEE		(3 << 3)	/* TDES EEE mode */
+#define ACE_TDES_FIFO_MASK		(1 << 5)
+#define ACE_TDES_FIFO_OFF		(0 << 5)	/* CPU mode */
+#define ACE_TDES_FIFO_ON		(1 << 5)	/* FIFO mode */
+#define ACE_TDES_SWAP_MASK		(0xf << 6)
+#define ACE_TDES_SWAPKEY_OFF		(0 << 6)
+#define ACE_TDES_SWAPKEY_ON		(1 << 6)
+#define ACE_TDES_SWAPIV_OFF		(0 << 7)
+#define ACE_TDES_SWAPIV_ON		(1 << 7)
+#define ACE_TDES_SWAPDO_OFF		(0 << 8)
+#define ACE_TDES_SWAPDO_ON		(1 << 8)
+#define ACE_TDES_SWAPDI_OFF		(0 << 9)
+#define ACE_TDES_SWAPDI_ON		(1 << 9)
+
+/* TDES status */
+#define ACE_TDES_OUTRDY_MASK		(1 << 0)
+#define ACE_TDES_OUTRDY_OFF		(0 << 0)
+#define ACE_TDES_OUTRDY_ON		(1 << 0)
+#define ACE_TDES_INRDY_MASK		(1 << 1)
+#define ACE_TDES_INRDY_OFF		(0 << 1)
+#define ACE_TDES_INRDY_ON		(1 << 1)
+#define ACE_TDES_BUSY_MASK		(1 << 2)
+#define ACE_TDES_BUSY_OFF		(0 << 2)
+#define ACE_TDES_BUSY_ON		(1 << 2)
+
+/* Hash control */
+#define ACE_HASH_ENGSEL_MASK		(0xf << 0)
+#define ACE_HASH_ENGSEL_SHA1HASH	(0x0 << 0)
+#define ACE_HASH_ENGSEL_SHA1HMAC	(0x1 << 0)
+#define ACE_HASH_ENGSEL_SHA1HMACIN	(0x1 << 0)
+#define ACE_HASH_ENGSEL_SHA1HMACOUT	(0x9 << 0)
+#define ACE_HASH_ENGSEL_MD5HASH		(0x2 << 0)
+#define ACE_HASH_ENGSEL_MD5HMAC		(0x3 << 0)
+#define ACE_HASH_ENGSEL_MD5HMACIN	(0x3 << 0)
+#define ACE_HASH_ENGSEL_MD5HMACOUT	(0xb << 0)
+#define ACE_HASH_ENGSEL_SHA256HASH	(0x4 << 0)
+#define ACE_HASH_ENGSEL_SHA256HMAC	(0x5 << 0)
+#define ACE_HASH_ENGSEL_PRNG		(0x8 << 0)
+#define ACE_HASH_STARTBIT_ON		(1 << 4)
+#define ACE_HASH_USERIV_EN		(1 << 5)
+
+/* Hash control 2 */
+#define ACE_HASH_PAUSE_ON		(1 << 0)
+
+/* Hash control - FIFO mode */
+#define ACE_HASH_FIFO_MASK		(1 << 0)
+#define ACE_HASH_FIFO_OFF		(0 << 0)
+#define ACE_HASH_FIFO_ON		(1 << 0)
+
+/* Hash control - byte swap */
+#define ACE_HASH_SWAP_MASK		(0xf << 0)
+#define ACE_HASH_SWAPKEY_OFF		(0 << 0)
+#define	ACE_HASH_SWAPKEY_ON		(1 << 0)
+#define ACE_HASH_SWAPIV_OFF		(0 << 1)
+#define	ACE_HASH_SWAPIV_ON		(1 << 1)
+#define ACE_HASH_SWAPDO_OFF		(0 << 2)
+#define ACE_HASH_SWAPDO_ON		(1 << 2)
+#define ACE_HASH_SWAPDI_OFF		(0 << 3)
+#define ACE_HASH_SWAPDI_ON		(1 << 3)
+
+/* Hash status */
+#define ACE_HASH_BUFRDY_MASK		(1 << 0)
+#define ACE_HASH_BUFRDY_OFF		(0 << 0)
+#define ACE_HASH_BUFRDY_ON		(1 << 0)
+#define ACE_HASH_SEEDSETTING_MASK	(1 << 1)
+#define ACE_HASH_SEEDSETTING_OFF	(0 << 1)
+#define ACE_HASH_SEEDSETTING_ON		(1 << 1)
+#define ACE_HASH_PRNGBUSY_MASK		(1 << 2)
+#define ACE_HASH_PRNGBUSY_OFF		(0 << 2)
+#define ACE_HASH_PRNGBUSY_ON		(1 << 2)
+#define ACE_HASH_PARTIALDONE_MASK	(1 << 4)
+#define ACE_HASH_PARTIALDONE_OFF	(0 << 4)
+#define ACE_HASH_PARTIALDONE_ON		(1 << 4)
+#define ACE_HASH_PRNGDONE_MASK		(1 << 5)
+#define ACE_HASH_PRNGDONE_OFF		(0 << 5)
+#define ACE_HASH_PRNGDONE_ON		(1 << 5)
+#define ACE_HASH_MSGDONE_MASK		(1 << 6)
+#define ACE_HASH_MSGDONE_OFF		(0 << 6)
+#define ACE_HASH_MSGDONE_ON		(1 << 6)
+#define ACE_HASH_PRNGERROR_MASK		(1 << 7)
+#define ACE_HASH_PRNGERROR_OFF		(0 << 7)
+#define ACE_HASH_PRNGERROR_ON		(1 << 7)
+
+#define ACE_SHA_TYPE_SHA1	1
+#define ACE_SHA_TYPE_SHA256	2
+
+/**
+ * Computes hash value of input pbuf using ACE
+ *
+ * @param in_addr	A pointer to the input buffer
+ * @param bufleni	Byte length of input buffer
+ * @param out_addr	A pointer to the output buffer. When complete
+ *			32 bytes are copied to pout[0]...pout[31]. Thus, a user
+ *			should allocate at least 32 bytes at pOut in advance.
+ * @param hash_type SHA1 or SHA256
+ *
+ * @return		0 on Success, -1 on Failure (Timeout)
+ */
+int ace_sha_hash_digest(const uchar *in_addr, uint buflen,
+			uchar *out_addr, uint hash_type);
+#endif
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index eb34422..2a20558 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -62,6 +62,7 @@
 #define EXYNOS4_GPIO_PART4_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_DP_BASE			DEVICE_NOT_AVAILABLE
 #define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS4X12 */
 #define EXYNOS4X12_GPIO_PART3_BASE	0x03860000
@@ -95,6 +96,7 @@
 #define EXYNOS4X12_I2S_BASE            DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_SPI_BASE            DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_SPI_ISP_BASE                DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS5 Common*/
 #define EXYNOS5_I2C_SPACING		0x10000
@@ -106,6 +108,7 @@
 #define EXYNOS5_SWRESET			0x10040400
 #define EXYNOS5_SYSREG_BASE		0x10050000
 #define EXYNOS5_WATCHDOG_BASE		0x101D0000
+#define EXYNOS5_ACE_SFR_BASE            0x10830000
 #define EXYNOS5_DMC_PHY0_BASE		0x10C00000
 #define EXYNOS5_DMC_PHY1_BASE		0x10C10000
 #define EXYNOS5_GPIO_PART3_BASE		0x10D10000
@@ -205,6 +208,7 @@ static inline unsigned int samsung_get_base_##device(void)	\
 
 SAMSUNG_BASE(adc, ADC_BASE)
 SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(ace_sfr, ACE_SFR_BASE)
 SAMSUNG_BASE(dp, DP_BASE)
 SAMSUNG_BASE(sysreg, SYSREG_BASE)
 SAMSUNG_BASE(fimd, FIMD_BASE)
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
new file mode 100644
index 0000000..2c54793
--- /dev/null
+++ b/drivers/crypto/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (c) 2013 Samsung Electronics Co., Ltd.
+# 	http://www.samsung.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libcrypto.o
+
+COBJS-$(CONFIG_EXYNOS_ACE_SHA)	+= ace_sha.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################
diff --git a/drivers/crypto/ace_sha.c b/drivers/crypto/ace_sha.c
new file mode 100644
index 0000000..e8d9b2d
--- /dev/null
+++ b/drivers/crypto/ace_sha.c
@@ -0,0 +1,129 @@
+/*
+ * Advanced Crypto Engine - SHA Firmware
+ * Copyright (c) 2012  Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <common.h>
+#include <sha256.h>
+#include <sha1.h>
+#include <asm/errno.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/ace_sha.h>
+
+/* Maximum frequency supported by the SoC*/
+#define MAX_FREQ	(1.7 * 1000 * 1000 * 1000)
+
+/* SHA1 value for the message of zero length */
+static const unsigned char sha1_digest_emptymsg[SHA1_SUM_LEN] = {
+	0xDA, 0x39, 0xA3, 0xEE, 0x5E, 0x6B, 0x4B, 0x0D,
+	0x32, 0x55, 0xBF, 0xFF, 0x95, 0x60, 0x18, 0x90,
+	0xAF, 0xD8, 0x07, 0x09};
+
+/* SHA256 value for the message of zero length */
+static const unsigned char sha256_digest_emptymsg[SHA256_SUM_LEN] = {
+	0xE3, 0xB0, 0xC4, 0x42, 0x98, 0xFC, 0x1C, 0x14,
+	0x9A, 0xFB, 0xF4, 0xC8, 0x99, 0x6F, 0xB9, 0x24,
+	0x27, 0xAE, 0x41, 0xE4, 0x64, 0x9B, 0x93, 0x4C,
+	0xA4, 0x95, 0x99, 0x1B, 0x78, 0x52, 0xB8, 0x55};
+
+int ace_sha_hash_digest(const unsigned char *pbuf, unsigned int buf_len,
+			unsigned char *pout, unsigned int hash_type)
+{
+	unsigned int i, reg, len;
+	unsigned int *pdigest;
+	struct exynos_ace_sfr *ace_sha_reg =
+		(struct exynos_ace_sfr *)samsung_get_base_ace_sfr();
+
+	if (buf_len == 0) {
+		/* ACE H/W cannot compute hash value for empty string */
+		if (hash_type == ACE_SHA_TYPE_SHA1)
+			memcpy(pout, sha1_digest_emptymsg, SHA1_SUM_LEN);
+		else
+			memcpy(pout, sha256_digest_emptymsg, SHA256_SUM_LEN);
+		return 0;
+	}
+
+	/* Flush HRDMA */
+	writel(ACE_FC_HRDMACFLUSH_ON, &ace_sha_reg->fc_hrdmac);
+	writel(ACE_FC_HRDMACFLUSH_OFF, &ace_sha_reg->fc_hrdmac);
+
+	/* Set byte swap of data in */
+	writel(ACE_HASH_SWAPDI_ON | ACE_HASH_SWAPDO_ON | ACE_HASH_SWAPIV_ON,
+		&ace_sha_reg->hash_byteswap);
+
+	/* Select Hash input mux as external source */
+	reg = readl(&ace_sha_reg->fc_fifoctrl);
+	reg = (reg & ~ACE_FC_SELHASH_MASK) | ACE_FC_SELHASH_EXOUT;
+	writel(reg, &ace_sha_reg->fc_fifoctrl);
+
+	/* Set Hash as SHA1 or SHA256 and start Hash engine */
+	reg = (hash_type == ACE_SHA_TYPE_SHA1) ?
+		ACE_HASH_ENGSEL_SHA1HASH : ACE_HASH_ENGSEL_SHA256HASH;
+	reg |= ACE_HASH_STARTBIT_ON;
+	writel(reg, &ace_sha_reg->hash_control);
+
+	/* Enable FIFO mode */
+	writel(ACE_HASH_FIFO_ON, &ace_sha_reg->hash_fifo_mode);
+
+	/* Set message length */
+	writel(buf_len, &ace_sha_reg->hash_msgsize_low);
+	writel(0, &ace_sha_reg->hash_msgsize_high);
+
+	/* Set HRDMA */
+	writel((unsigned int)pbuf, &ace_sha_reg->fc_hrdmas);
+	writel(buf_len, &ace_sha_reg->fc_hrdmal);
+
+	/* Check if status changes within given time limit */
+	while ((readl(&ace_sha_reg->hash_status) & ACE_HASH_MSGDONE_MASK) ==
+		ACE_HASH_MSGDONE_OFF) {
+		/*
+		 * PRNG error bit goes HIGH if a PRNG request occurs without
+		 * a complete seed setup. We are using this bit to check h/w
+		 * because proper setup is not expected in that case.
+		 */
+		if ((readl(&ace_sha_reg->hash_status)
+			& ACE_HASH_PRNGERROR_MASK) == ACE_HASH_PRNGERROR_ON)
+			break;
+	}
+
+	/* Clear MSG_DONE bit */
+	writel(ACE_HASH_MSGDONE_ON, &ace_sha_reg->hash_status);
+
+	/* Read hash result */
+	pdigest = (unsigned int *)pout;
+	len = (hash_type == ACE_SHA_TYPE_SHA1) ? SHA1_SUM_LEN : SHA256_SUM_LEN;
+
+	for (i = 0; i < len / 4; i++)
+		pdigest[i] = readl(&ace_sha_reg->hash_result[i]);
+
+	/* Clear HRDMA pending bit */
+	writel(ACE_FC_HRDMA, &ace_sha_reg->fc_intpend);
+
+	return 0;
+}
+
+void hw_sha256(const unsigned char *pbuf, unsigned int buf_len,
+			unsigned char *pout, unsigned int chunk_size)
+{
+	ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA256);
+}
+
+void hw_sha1(const unsigned char *pbuf, unsigned int buf_len,
+			unsigned char *pout, unsigned int chunk_size)
+{
+	ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA1);
+}
-- 
1.8.0



More information about the U-Boot mailing list