[U-Boot] [PATCH v2 0/4] Tegra114: MMC: Add MMC driver for T114/Dalmore

[Tom Warren]

This patchset adds SDMMC device-tree support to the Tegra114 dts files,
and enables the Tegra MMC driver on Tegra114 Dalmore.

Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load
a kernel off of a SD card OK, card detect works, and the env is now
stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).

Changes in v2:
- Remove SDIOCFG_HSM define, unused
- Remove I2C retries
- Change CONFIG_ENV_OFFSET to match Dalmore's eMMC chip boot part size
   
Tom Warren (4):
  Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for
    now)
  Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
  Tegra114: MMC: Add SD bus power-rail init routine
  Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
    boards

 arch/arm/dts/tegra114.dtsi                      | 32 ++++++++++++
 arch/arm/include/asm/arch-tegra114/gp_padctrl.h |  6 +++
 board/nvidia/dalmore/dalmore.c                  | 67 +++++++++++++++++++++++++
 board/nvidia/dalmore/pinmux-config-dalmore.h    |  6 +++
 board/nvidia/dts/tegra114-dalmore.dts           | 13 +++++
 include/configs/dalmore.h                       | 12 ++++-
 6 files changed, 135 insertions(+), 1 deletion(-)

-- 
1.8.1.5