[U-Boot] [PATCH v2 43/45] image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL

Simon Glass sjg at chromium.org
Tue Mar 19 00:52:03 CET 2013


This code is very large, and in SPL it isn't always useful to print
out image information (in fact there might not even be a console
active). So disable this feature unless this option is set.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Add new patch to control FIT image printing in SPL
- Fix checkpatch warnings about space after cast

 README             |  6 ++++++
 common/image-fit.c |  8 +++++---
 include/image.h    | 33 +++++++++++++++++++++++++++++++--
 3 files changed, 42 insertions(+), 5 deletions(-)

diff --git a/README b/README
index d8ccc3e..d98fd98 100644
--- a/README
+++ b/README
@@ -2909,6 +2909,12 @@ FIT uImage format:
 		use an arch-specific makefile fragment instead, for
 		example if more than one image needs to be produced.
 
+		CONFIG_FIT_SPL_PRINT
+		Printing information about a FIT image adds quite a bit of
+		code to SPL. So this is normally disabled in SPL. Use this
+		option to re-enable it. This will affect the output of the
+		bootm command when booting a FIT image.
+
 Modem Support:
 --------------
 
diff --git a/common/image-fit.c b/common/image-fit.c
index 29ea4c9..b7ff0da 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -126,6 +126,7 @@ static void fit_get_debug(const void *fit, int noffset,
 	      fdt_strerror(err));
 }
 
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_FIT_SPL_PRINT)
 /**
  * fit_print_contents - prints out the contents of the FIT format image
  * @fit: pointer to the FIT format image header
@@ -422,6 +423,7 @@ void fit_image_print(const void *fit, int image_noffset, const char *p)
 		}
 	}
 }
+#endif
 
 /**
  * fit_get_desc - get node description property
@@ -872,16 +874,16 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
 int calculate_hash(const void *data, int data_len, const char *algo,
 			uint8_t *value, int *value_len)
 {
-	if (strcmp(algo, "crc32") == 0) {
+	if (IMAGE_ENABLE_CRC32 && strcmp(algo, "crc32") == 0) {
 		*((uint32_t *)value) = crc32_wd(0, data, data_len,
 							CHUNKSZ_CRC32);
 		*((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value));
 		*value_len = 4;
-	} else if (strcmp(algo, "sha1") == 0) {
+	} else if (IMAGE_ENABLE_SHA1 && strcmp(algo, "sha1") == 0) {
 		sha1_csum_wd((unsigned char *)data, data_len,
 			     (unsigned char *)value, CHUNKSZ_SHA1);
 		*value_len = 20;
-	} else if (strcmp(algo, "md5") == 0) {
+	} else if (IMAGE_ENABLE_MD5 && strcmp(algo, "md5") == 0) {
 		md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5);
 		*value_len = 16;
 	} else {
diff --git a/include/image.h b/include/image.h
index 5766b58..3a70404 100644
--- a/include/image.h
+++ b/include/image.h
@@ -64,8 +64,37 @@
 #if defined(CONFIG_FIT)
 #include <libfdt.h>
 #include <fdt_support.h>
-#define CONFIG_MD5		/* FIT images need MD5 support */
-#define CONFIG_SHA1		/* and SHA1 */
+# ifdef CONFIG_SPL_BUILD
+#  ifdef CONFIG_SPL_CRC32_SUPPORT
+#   define IMAGE_ENABLE_CRC32	1
+#  endif
+#  ifdef CONFIG_SPL_MD5_SUPPORT
+#   define IMAGE_ENABLE_MD5	1
+#  endif
+#  ifdef CONFIG_SPL_SHA1_SUPPORT
+#   define IMAGE_ENABLE_SHA1	1
+#  endif
+# else
+#  define CONFIG_CRC32		/* FIT images need CRC32 support */
+#  define CONFIG_MD5		/* and MD5 */
+#  define CONFIG_SHA1		/* and SHA1 */
+#  define IMAGE_ENABLE_CRC32	1
+#  define IMAGE_ENABLE_MD5	1
+#  define IMAGE_ENABLE_SHA1	1
+# endif
+
+#ifndef IMAGE_ENABLE_CRC32
+#define IMAGE_ENABLE_CRC32	0
+#endif
+
+#ifndef IMAGE_ENABLE_MD5
+#define IMAGE_ENABLE_MD5	0
+#endif
+
+#ifndef IMAGE_ENABLE_SHA1
+#define IMAGE_ENABLE_SHA1	0
+#endif
+
 #endif
 
 /*
-- 
1.8.1.3



More information about the U-Boot mailing list