[U-Boot] [PATCH] arm: at91: at91sam9n12ek: add nandflash/spiflash/mmc/lcd support
Josh Wu
josh.wu at atmel.com
Tue Mar 19 11:58:11 CET 2013
Hi, Andreas
thanks for the review.
On 3/18/2013 9:48 PM, Andreas Bießmann wrote:
> Dear Josh Wu,
>
> this is an additional review. I left out MAINTAINERS, alphabetical
> ordering, copyright stuff a.s.o. mentioned before.
>
> On 03/15/2013 11:17 AM, Josh Wu wrote:
>> This patch adds at91sam9n12ek support, it enables:
>> - dbgu
>> - nand with pmecc
>> - spi flash
>> - mmc
>> - lcd
>>
>> TODO:
>> - usb
>> - ethernet
>>
>> Signed-off-by: Josh Wu <josh.wu at atmel.com>
>> ---
>> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
>> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 137 ++++++++++
>> arch/arm/cpu/arm926ejs/at91/clock.c | 4 +-
>> arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +
>> arch/arm/include/asm/arch-at91/at91sam9n12.h | 126 +++++++++
>> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 17 +-
>> arch/arm/include/asm/arch-at91/hardware.h | 2 +
>> board/atmel/at91sam9n12ek/Makefile | 52 ++++
>> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 270 ++++++++++++++++++++
>> boards.cfg | 3 +
>> drivers/spi/atmel_spi.c | 3 +-
>> include/configs/at91sam9n12ek.h | 232 +++++++++++++++++
>> 12 files changed, 843 insertions(+), 6 deletions(-)
>> create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
>> create mode 100644 arch/arm/include/asm/arch-at91/at91sam9n12.h
>> create mode 100644 board/atmel/at91sam9n12ek/Makefile
>> create mode 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c
>> create mode 100644 include/configs/at91sam9n12ek.h
>>
>> diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
>> index 346e58f..c4964a1 100644
>> --- a/arch/arm/cpu/arm926ejs/at91/Makefile
>> +++ b/arch/arm/cpu/arm926ejs/at91/Makefile
>> @@ -36,6 +36,7 @@ COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
>> COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
>> COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
>> COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o
>> +COBJS-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o
>> COBJS-$(CONFIG_AT91_EFLASH) += eflash.o
>> COBJS-$(CONFIG_AT91_LED) += led.o
>> COBJS-y += clock.o
>> diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
>> new file mode 100644
>> index 0000000..5094262
>> --- /dev/null
>> +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
>> @@ -0,0 +1,137 @@
>> +/*
>> + * (C) Copyright 2013 Atmel Corporation
>> + * Josh Wu <josh.wu at atmel.com>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/io.h>
>> +#include <asm/arch/at91_common.h>
>> +#include <asm/arch/at91_pmc.h>
>> +#include <asm/arch/at91_pio.h>
>> +
>> +unsigned int has_lcdc()
>> +{
>> + return 1;
>> +}
>> +
>> +void at91_serial0_hw_init(void)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */
>> + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */
>> + writel(1 << ATMEL_ID_USART0, &pmc->pcer);
>> +}
>> +
>> +void at91_serial1_hw_init(void)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */
>> + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */
>> + writel(1 << ATMEL_ID_USART1, &pmc->pcer);
>> +}
>> +
>> +void at91_serial2_hw_init(void)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */
>> + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */
>> + writel(1 << ATMEL_ID_USART2, &pmc->pcer);
>> +}
>> +
>> +void at91_serial3_hw_init(void)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */
>> + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */
>> + writel(1 << ATMEL_ID_USART3, &pmc->pcer);
>> +}
>> +
>> +void at91_seriald_hw_init(void)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* DRXD */
> The pullup should be on the TX line, please swap the both lines here to
> reflect the same order as before (TX than RX).
I'll fix it.
>
>> + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* DTXD */
>> + writel(1 << ATMEL_ID_SYS, &pmc->pcer);
>> +}
>> +
>> +#ifdef CONFIG_ATMEL_SPI
>> +void at91_spi0_hw_init(unsigned long cs_mask)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* SPI0_MISO */
>> + at91_set_a_periph(AT91_PIO_PORTA, 12, 1); /* SPI0_MOSI */
>> + at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* SPI0_SPCK */
> PullUp unconditional for these lines here? I think this is not a good
> idea. Can you please use the CONFIG_AT91_GPIO_PULLUP define here as
> other at91 devices do?
I will disable all the pull-up condition for the pins.
>
>> +
>> + /* Enable clock */
>> + writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
>> +
>> + if (cs_mask & (1 << 0))
>> + at91_set_a_periph(AT91_PIO_PORTA, 14, 1);
>> + if (cs_mask & (1 << 1))
>> + at91_set_b_periph(AT91_PIO_PORTA, 7, 1);
>> + if (cs_mask & (1 << 2))
>> + at91_set_b_periph(AT91_PIO_PORTA, 1, 1);
>> + if (cs_mask & (1 << 3))
>> + at91_set_b_periph(AT91_PIO_PORTB, 3, 1);
> I think the chip selects can have the PU unconditional.
>
> The other at91 SoC use GPIO access here for the cs lines. I'm fine with
> this solution but wonder why.
since we finally use GPIO access for the cs lines. I'll change all this
to gpio output.
>
>> +}
>> +
>> +void at91_spi1_hw_init(unsigned long cs_mask)
>> +{
>> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>> +
>> + at91_set_b_periph(AT91_PIO_PORTA, 21, 1); /* SPI1_MISO */
>> + at91_set_b_periph(AT91_PIO_PORTA, 22, 1); /* SPI1_MOSI */
>> + at91_set_b_periph(AT91_PIO_PORTA, 23, 1); /* SPI1_SPCK */
> same here.
I'll disable the pull-up.
>
>> +
>> + /* Enable clock */
>> + writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
>> +
>> + if (cs_mask & (1 << 0))
>> + at91_set_b_periph(AT91_PIO_PORTA, 8, 1);
>> + if (cs_mask & (1 << 1))
>> + at91_set_b_periph(AT91_PIO_PORTA, 0, 1);
>> + if (cs_mask & (1 << 2))
>> + at91_set_b_periph(AT91_PIO_PORTA, 31, 1);
>> + if (cs_mask & (1 << 3))
>> + at91_set_b_periph(AT91_PIO_PORTA, 30, 1);
>> +}
>> +#endif
>> +
>> +void at91_mci_hw_init(void)
>> +{
>> + struct at91_pmc *pmc = (struct at91_pmec *)ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */
>> + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */
>> + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */
>> + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */
>> + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */
>> + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */
>> +
>> + writel(1 << ATMEL_ID_HSMCI, &pmc->pcer);
>> +}
>> +
>> diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
>> index f825388..55c9eac 100644
>> --- a/arch/arm/cpu/arm926ejs/at91/clock.c
>> +++ b/arch/arm/cpu/arm926ejs/at91/clock.c
>> @@ -156,7 +156,7 @@ int at91_clock_init(unsigned long main_clock)
>> */
>> mckr = readl(&pmc->mckr);
>> #if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
>> - || defined(CONFIG_AT91SAM9X5)
>> + || defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
>> /* plla divisor by 2 */
>> gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
>> #endif
>> @@ -171,7 +171,7 @@ int at91_clock_init(unsigned long main_clock)
>> if (mckr & AT91_PMC_MCKR_MDIV_MASK)
>> freq /= 2; /* processor clock division */
>> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
>> - || defined(CONFIG_AT91SAM9X5)
>> + || defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
>> /* mdiv <==> divisor
>> * 0 <==> 1
>> * 1 <==> 2
>> diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
>> index b9a93b0..2cd0dfb 100644
>> --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
>> +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
>> @@ -25,6 +25,8 @@
>> #include <asm/arch/at91sam9g45_matrix.h>
>> #elif defined(CONFIG_AT91SAM9X5)
>> #include <asm/arch/at91sam9x5_matrix.h>
>> +#elif defined(CONFIG_AT91SAM9N12)
>> +#include <asm/arch/at91sam9n12_matrix.h>
>> #else
>> #error "Unsupported AT91SAM9/CAP9 processor"
>> #endif
>> diff --git a/arch/arm/include/asm/arch-at91/at91sam9n12.h b/arch/arm/include/asm/arch-at91/at91sam9n12.h
>> new file mode 100644
>> index 0000000..ce255b8
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-at91/at91sam9n12.h
>> @@ -0,0 +1,126 @@
>> +/*
>> + * Chip-specific header file for the AT91SAM9N12
>> + *
>> + * (C) Copyright 2013 Atmel Corporation.
>> + * Josh Wu <josh.wu at atmel.com>
>> + *
>> + * Definitions for the SoC:
>> + * AT91SAM9N12
>> + *
>> + * Note that those SoCs are mostly software and pin compatible,
>> + * therefore this file applies to all of them. Differences between
>> + * those SoCs are concentrated at the end of this file.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#ifndef __AT91SAM9N12_H
>> +#define __AT91SAM9N12_H
>> +
>> +#define CONFIG_ARM926EJS /* ARM926EJS Core */
>> +#define CONFIG_AT91FAMILY /* It's a member of AT91 */
>> +
>> +/*
>> + * Peripheral identifiers/interrupts.
>> + */
>> +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
>> +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */
>> +#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */
>> +#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */
>> +#define ATMEL_ID_FUSE 4 /* FUSE Controller */
>> +#define ATMEL_ID_USART0 5 /* USART 0 */
>> +#define ATMEL_ID_USART1 6 /* USART 1 */
>> +#define ATMEL_ID_USART2 7 /* USART 2 */
>> +#define ATMEL_ID_USART3 8 /* USART 3 */
>> +#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */
>> +#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */
>> +#define ATMEL_ID_HSMCI 12 /* High Speed Multimedia Card Interface */
>> +#define ATMEL_ID_SPI0 13 /* Serial Peripheral Interface 0 */
>> +#define ATMEL_ID_SPI1 14 /* Serial Peripheral Interface 1 */
>> +#define ATMEL_ID_UART0 15 /* UART 0 */
>> +#define ATMEL_ID_UART1 16 /* UART 1 */
>> +#define ATMEL_ID_TC01 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
>> +#define ATMEL_ID_PWM 18 /* Pulse Width Modulation Controller */
>> +#define ATMEL_ID_ADC 19 /* ADC Controller */
>> +#define ATMEL_ID_DMAC 20 /* DMA Controller */
>> +#define ATMEL_ID_UHP 22 /* USB Host */
>> +#define ATMEL_ID_UDP 23 /* USB Device */
>> +#define ATMEL_ID_LCDC 25 /* LCD Controller */
>> +#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */
>> +#define ATMEL_ID_TRNG 30 /* True Random Number Generator */
>> +#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */
>> +
>> +/*
>> + * User Peripherals physical base addresses.
>> + */
>> +#define ATMEL_BASE_SPI0 0xf0000000
>> +#define ATMEL_BASE_SPI1 0xf0004000
>> +#define ATMEL_BASE_HSMCI 0xf0008000
>> +#define ATMEL_BASE_SSC 0xf0010000
>> +#define ATMEL_BASE_TC012 0xf8008000
>> +#define ATMEL_BASE_TC345 0xf800c000
>> +#define ATMEL_BASE_TWI0 0xf8010000
>> +#define ATMEL_BASE_TWI1 0xf8014000
>> +#define ATMEL_BASE_USART0 0xf801c000
>> +#define ATMEL_BASE_USART1 0xf8020000
>> +#define ATMEL_BASE_USART2 0xf8024000
>> +#define ATMEL_BASE_USART3 0xf8028000
>> +#define ATMEL_BASE_PWM 0xf8034000
>> +#define ATMEL_BASE_LCDC 0xf8038000
>> +#define ATMEL_BASE_UDP 0xf803c000
>> +#define ATMEL_BASE_UART0 0xf8040000
>> +#define ATMEL_BASE_UART1 0xf8044000
>> +#define ATMEL_BASE_TRNG 0xf8048000
>> +#define ATMEL_BASE_ADC 0xf804c000
>> +
>> +/*
>> + * System Peripherals physical base addresses.
>> + */
>> +#define ATMEL_BASE_FUSE 0xffffdc00
>> +#define ATMEL_BASE_MATRIX 0xffffde00
>> +#define ATMEL_BASE_PMECC 0xffffe000
>> +#define ATMEL_BASE_PMERRLOC 0xffffe600
>> +#define ATMEL_BASE_DDRSDRC 0xffffe800
>> +#define ATMEL_BASE_SMC 0xffffea00
>> +#define ATMEL_BASE_DMAC 0xffffec00
>> +#define ATMEL_BASE_AIC 0xfffff000
>> +#define ATMEL_BASE_DBGU 0xfffff200
>> +#define ATMEL_BASE_PIOA 0xfffff400
>> +#define ATMEL_BASE_PIOB 0xfffff600
>> +#define ATMEL_BASE_PIOC 0xfffff800
>> +#define ATMEL_BASE_PIOD 0xfffffa00
>> +#define ATMEL_BASE_PMC 0xfffffc00
>> +#define ATMEL_BASE_RSTC 0xfffffe00
>> +#define ATMEL_BASE_SHDC 0xfffffe10
>> +#define ATMEL_BASE_PIT 0xfffffe30
>> +#define ATMEL_BASE_WDT 0xfffffe40
>> +#define ATMEL_BASE_SCKCR 0xfffffe50
>> +#define ATMEL_BASE_BSCR 0xfffffe54
>> +#define ATMEL_BASE_GPBR 0xfffffe60
>> +#define ATMEL_BASE_RTC 0xfffffeb0
>> +
>> +/*
>> + * Internal Memory
>> + */
>> +#define ATMEL_BASE_BOOT 0x00000000 /* Boot mapped area */
>> +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
>> +#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM */
>> +#define ATMEL_UHP_BASE 0x00500000 /* USB Host controller */
>> +
>> +/*
>> + * Cpu Name
>> + */
>> +#define ATMEL_CPU_NAME "AT91SAM9N12"
>> +
>> +/*
>> + * Other misc defines
>> + */
>> +#define ATMEL_PIO_PORTS 4
>> +#define CPU_HAS_PIO3
>> +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
>> +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
>> +
>> +#endif
>> diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
>> index d6ce6fa..f78e60c 100644
>> --- a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
>> +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
>> @@ -1,10 +1,10 @@
>> /*
>> * Matrix-centric header file for the AT91SAM9X5 family
>> *
>> - * Copyright (C) 2012 Atmel Corporation.
>> + * Copyright (C) 2013 Atmel Corporation.
>> *
>> * Memory Controllers (MATRIX, EBI) - System peripherals registers.
>> - * Based on AT91SAM9X5 preliminary datasheet.
>> + * Based on AT91SAM9X5 & AT91SAM9N12 preliminary datasheet.
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> @@ -17,14 +17,25 @@
>>
>> #ifndef __ASSEMBLY__
>>
>> +/* AT91SAM9N12 Matrix definition is a subset of AT91SAM9X5. */
>> struct at91_matrix {
>> u32 mcfg[16];
>> u32 scfg[16];
>> u32 pras[16][2];
>> u32 mrcr; /* 0x100 Master Remap Control */
>> - u32 filler[7];
>> + u32 filler[5];
>> +#ifdef CONFIG_AT91SAM9X5
>> + u32 filler1[2];
>> +#endif
>> + /* EBI Chip Select Assignment Register
>> + * 0x118: AT91SAM9N12
>> + * 0x120: AT91SAM9X5
>> + */
>> u32 ebicsa;
>> u32 filler4[47];
>> +#ifdef CONFIG_AT91SAM9N12
>> + u32 filler5[2];
>> +#endif
>> u32 wpmr;
>> u32 wpsr;
>> };
>> diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
>> index 4c4ee70..7ada301 100644
>> --- a/arch/arm/include/asm/arch-at91/hardware.h
>> +++ b/arch/arm/include/asm/arch-at91/hardware.h
>> @@ -39,6 +39,8 @@
>> # include <asm/arch/at91sam9g45.h>
>> #elif defined(CONFIG_AT91SAM9X5)
>> # include <asm/arch/at91sam9x5.h>
>> +#elif defined(CONFIG_AT91SAM9N12)
>> +# include <asm/arch/at91sam9n12.h>
>> #elif defined(CONFIG_AT91CAP9)
>> # include <asm/arch/at91cap9.h>
>> #elif defined(CONFIG_AT91X40)
>> diff --git a/board/atmel/at91sam9n12ek/Makefile b/board/atmel/at91sam9n12ek/Makefile
>> new file mode 100644
>> index 0000000..9187715
>> --- /dev/null
>> +++ b/board/atmel/at91sam9n12ek/Makefile
>> @@ -0,0 +1,52 @@
>> +#
>> +# (C) Copyright 2003-2008
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> +#
>> +# (C) Copyright 2008
>> +# Stelian Pop <stelian.pop at leadtechdesign.com>
>> +# Lead Tech Design <www.leadtechdesign.com>
>> +#
>> +# (C) Copyright 2013
>> +# Josh Wu <voice.shen at atmel.com>
>> +# Atmel corporation <www.atmel.com>
>> +#
>> +# See file CREDITS for list of people who contributed to this
>> +# project.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation; either version 2 of
>> +# the License, or (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> +# MA 02111-1307 USA
>> +#
>> +
>> +include $(TOPDIR)/config.mk
>> +
>> +LIB = $(obj)lib$(BOARD).o
>> +
>> +COBJS-y += at91sam9n12ek.o
>> +
>> +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
>> +OBJS := $(addprefix $(obj),$(COBJS-y))
>> +SOBJS := $(addprefix $(obj),$(SOBJS))
>> +
>> +$(LIB): $(obj).depend $(OBJS) $(SOBJS)
>> + $(call cmd_link_o_target, $(OBJS) $(SOBJS))
>> +
>> +#########################################################################
>> +
>> +# defines $(obj).depend target
>> +include $(SRCTREE)/rules.mk
>> +
>> +sinclude $(obj).depend
>> +
>> +#########################################################################
>> diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
>> new file mode 100644
>> index 0000000..dc95777
>> --- /dev/null
>> +++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
>> @@ -0,0 +1,270 @@
>> +/*
>> + * (C) Copyright 2013 Atmel Corporation
>> + * Josh Wu <josh.wu at atmel.com>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/io.h>
>> +#include <asm/arch/at91sam9x5_matrix.h>
>> +#include <asm/arch/at91sam9_smc.h>
>> +#include <asm/arch/at91_common.h>
>> +#include <asm/arch/at91_pmc.h>
>> +#include <asm/arch/at91_rstc.h>
>> +#include <asm/arch/at91_pio.h>
>> +#include <asm/arch/clk.h>
>> +#include <lcd.h>
>> +#include <atmel_hlcdc.h>
>> +#include <atmel_mci.h>
>> +
>> +#ifdef CONFIG_LCD_INFO
>> +#include <nand.h>
>> +#include <version.h>
>> +#endif
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +/* ------------------------------------------------------------------------- */
>> +/*
>> + * Miscelaneous platform dependent initialisations
>> + */
>> +#ifdef CONFIG_NAND_ATMEL
>> +static void at91sam9n12ek_nand_hw_init(void)
>> +{
>> + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
>> + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
>> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
>> + unsigned long csa;
>> +
>> + /* Assign CS3 to NAND/SmartMedia Interface */
>> + csa = readl(&matrix->ebicsa);
>> + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
>> + /* Configure databus */
>> + csa &= ~AT91_MATRIX_NFD0_ON_D16; /* nandflash connect to D0~D15 */
>> + /* Configure IO drive */
>> + csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
>> +
>> + writel(csa, &matrix->ebicsa);
>> +
>> + /* Configure SMC CS3 for NAND/SmartMedia */
>> + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
>> + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
>> + &smc->cs[3].setup);
>> + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
>> + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6),
>> + &smc->cs[3].pulse);
>> + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(7),
>> + &smc->cs[3].cycle);
>> + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
>> + AT91_SMC_MODE_EXNW_DISABLE |
>> +#ifdef CONFIG_SYS_NAND_DBW_16
>> + AT91_SMC_MODE_DBW_16 |
>> +#else /* CONFIG_SYS_NAND_DBW_8 */
>> + AT91_SMC_MODE_DBW_8 |
>> +#endif
>> + AT91_SMC_MODE_TDF_CYCLE(1),
>> + &smc->cs[3].mode);
>> +
>> + writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
>> +
>> + /* Configure RDY/BSY pin */
>> + at91_set_pio_input(AT91_PIO_PORTD, 5, 1);
>> +
>> + /* Configure ENABLE pin for NandFlash */
>> + at91_set_pio_output(AT91_PIO_PORTD, 4, 1);
>> +
>> + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
>> + at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
>> + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */
>> + at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_LCD
>> +vidinfo_t panel_info = {
>> + .vl_col = 480,
>> + .vl_row = 272,
>> + .vl_clk = 9000000,
>> + .vl_bpix = LCD_BPP,
>> + .vl_sync = 0,
>> + .vl_tft = 1,
>> + .vl_hsync_len = 5,
>> + .vl_left_margin = 8,
>> + .vl_right_margin = 43,
>> + .vl_vsync_len = 10,
>> + .vl_upper_margin = 4,
>> + .vl_lower_margin = 12,
>> + .mmio = ATMEL_BASE_LCDC,
>> +};
>> +
>> +void lcd_enable(void)
>> +{
>> + at91_set_pio_output(AT91_PIO_PORTC, 25, 0); /* power up */
>> +}
>> +
>> +void lcd_disable(void)
>> +{
>> + at91_set_pio_output(AT91_PIO_PORTC, 25, 1); /* power down */
>> +}
>> +
>> +static void at91sam9n12ek_lcd_hw_init(void)
>> +{
>> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
>> +
>> + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
>> + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
>> + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
>> + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
>> + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
>> + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
>> +
>> + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
>> + at91_set_b_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
>> + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
>> + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
>> +
>> + writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
> can we move this lcd init into the SoC peripherial file?
sure.
>
>> +}
>> +
>> +#ifdef CONFIG_LCD_INFO
>> +void lcd_show_board_info(void)
>> +{
>> + ulong dram_size, nand_size;
>> + int i;
>> + char temp[32];
>> +
>> + lcd_printf("%s\n", U_BOOT_VERSION);
>> + lcd_printf("(C) 2013 ATMEL Corp\n");
>> + lcd_printf("at91 at atmel.com\n");
>> + lcd_printf("%s CPU at %s MHz\n",
>> + ATMEL_CPU_NAME,
>> + strmhz(temp, get_cpu_clk_rate()));
>> +
>> + dram_size = 0;
>> + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
>> + dram_size += gd->bd->bi_dram[i].size;
>> + nand_size = 0;
>> + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
>> + nand_size += nand_info[i].size;
>> + lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
>> + dram_size >> 20,
>> + nand_size >> 20);
>> +}
>> +#endif /* CONFIG_LCD_INFO */
>> +#endif /* CONFIG_LCD */
>> +
>> +/* SPI chip select control */
>> +#ifdef CONFIG_ATMEL_SPI
>> +#include <spi.h>
>> +int spi_cs_is_valid(unsigned int bus, unsigned int cs)
>> +{
>> + return bus == 0 && cs < 2;
>> +}
>> +
>> +void spi_cs_activate(struct spi_slave *slave)
>> +{
>> + switch (slave->cs) {
>> + case 0:
>> + at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
> Ouch ... before you setup these as peripherial lines, here you use it as
> PIO. Please a) setup as PIO or b) do not set the line here cause it
> should be set by SPI IP automagically on transfer (havn't checked that,
> but should work).
I prefer to choose a) setup as PIO. for b), it may impact many other boards.
>
>> + break;
>> + case 1:
>> + at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
>> + break;
>> + }
>> +}
>> +
>> +void spi_cs_deactivate(struct spi_slave *slave)
>> +{
>> + switch (slave->cs) {
>> + case 0:
>> + at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
>> + break;
>> + case 1:
>> + at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
>> + break;
>> + }
>> +}
>> +#endif /* CONFIG_ATMEL_SPI */
>> +
>> +#ifdef CONFIG_GENERIC_ATMEL_MCI
>> +int board_mmc_init(bd_t *bd)
>> +{
>> + at91_mci_hw_init();
>> +
>> + return atmel_mci_init((void *)ATMEL_BASE_HSMCI);
>> +}
>> +#endif
>> +
>> +int board_early_init_f(void)
>> +{
>> + /* Enable clocks for all PIOs */
>> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
>> + writel((1 << ATMEL_ID_PIOAB) | (1 << ATMEL_ID_PIOCD), &pmc->pcer);
>> +
>> + at91_seriald_hw_init();
>> + return 0;
>> +}
>> +
>> +int board_init(void)
>> +{
>> + /* adress of boot parameters */
>> + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>> +
>> +#ifdef CONFIG_NAND_ATMEL
>> + at91sam9n12ek_nand_hw_init();
>> +#endif
>> +
>> +#ifdef CONFIG_ATMEL_SPI
>> + at91_spi0_hw_init(1 << 0);
>> +#endif
>> +
>> +#ifdef CONFIG_LCD
>> + at91sam9n12ek_lcd_hw_init();
>> +#endif
>> +
>> + return 0;
>> +}
>> +
>> +int dram_init(void)
>> +{
>> + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
>> + CONFIG_SYS_SDRAM_SIZE);
>> + return 0;
>> +}
>> diff --git a/boards.cfg b/boards.cfg
>> index 32b0ccf..7d87df1 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -106,6 +106,9 @@ at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel
>> at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
>> at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
>> at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
>> +at91sam9n12ek_nandflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH
>> +at91sam9n12ek_spiflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH
>> +at91sam9n12ek_mmc arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC
>> snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
>> snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20
>> vl_ma2sc arm arm926ejs vl_ma2sc BuS at91
>> diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
>> index ce7d460..95b131a 100644
>> --- a/drivers/spi/atmel_spi.c
>> +++ b/drivers/spi/atmel_spi.c
>> @@ -92,7 +92,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
>> as->slave.cs = cs;
>> as->regs = regs;
>> as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
>> -#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9M10G45)
>> +#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9M10G45) \
>> + || defined(CONFIG_AT91SAM9N12)
> I mentioned that before in a mail to Bo, can we please find some better
> solution here like 'CPU_HAS_MCIx' (like the CPU_HAS_PIO3) or some other
> identifier?
for the SPI ip, I will include a extra patch in next version, which will
use a run-time ip detect for SPI.
so those macro can be removed.
>
>> | ATMEL_SPI_MR_WDRBT
>> #endif
>> | ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
>> diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
>> new file mode 100644
>> index 0000000..10530f4
>> --- /dev/null
>> +++ b/include/configs/at91sam9n12ek.h
>> @@ -0,0 +1,232 @@
>> +/*
>> + * (C) Copyright 2013 Atmel Corporation.
>> + * Josh Wu <josh.wu at atmel.com>
>> + *
>> + * Configuation settings for the AT91SAM9N12-EK boards.
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#ifndef __AT91SAM9N12_CONFIG_H_
>> +#define __AT91SAM9N12_CONFIG_H_
>> +
>> +/*
>> + * SoC must be defined first, before hardware.h is included.
>> + * In this case SoC is defined in boards.cfg.
>> + */
>> +#include <asm/hardware.h>
>> +
>> +#define CONFIG_SYS_TEXT_BASE 0x26f00000
>> +
>> +/* ARM asynchronous clock */
>> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
>> +#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
>> +#define CONFIG_SYS_HZ 1000
>> +
>> +/* Misc CPU related */
>> +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
>> +#define CONFIG_SETUP_MEMORY_TAGS
>> +#define CONFIG_INITRD_TAG
>> +#define CONFIG_SKIP_LOWLEVEL_INIT
>> +#define CONFIG_BOARD_EARLY_INIT_F
>> +#define CONFIG_DISPLAY_CPUINFO
>> +
>> +#define CONFIG_OF_LIBFDT
>> +
>> +/* general purpose I/O */
>> +#define CONFIG_AT91_GPIO
>> +
>> +/* serial console */
>> +#define CONFIG_ATMEL_USART
>> +#define CONFIG_USART_BASE ATMEL_BASE_DBGU
>> +#define CONFIG_USART_ID ATMEL_ID_SYS
> remove the tab after define
ok.
>
>> +#define CONFIG_BAUDRATE 115200
>> +
>> +/* LCD */
>> +#define CONFIG_LCD
>> +#define LCD_BPP LCD_COLOR16
>> +#define LCD_OUTPUT_BPP 24
>> +#define CONFIG_LCD_LOGO
>> +#undef LCD_TEST_PATTERN
> where is this defined?
I'll remove the undef.
>
>> +#define CONFIG_LCD_INFO
>> +#define CONFIG_LCD_INFO_BELOW_LOGO
>> +#define CONFIG_SYS_WHITE_ON_BLACK
>> +#define CONFIG_ATMEL_HLCD
>> +#define CONFIG_ATMEL_LCD_RGB565
>> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
>> +
>> +#define CONFIG_BOOTDELAY 3
>> +
>> +/*
>> + * BOOTP options
>> + */
>> +#define CONFIG_BOOTP_BOOTFILESIZE
>> +#define CONFIG_BOOTP_BOOTPATH
>> +#define CONFIG_BOOTP_GATEWAY
>> +#define CONFIG_BOOTP_HOSTNAME
>> +
>> +/* NOR flash - no real flash on this board */
>> +#define CONFIG_SYS_NO_FLASH
>> +
>> +/*
>> + * Command line configuration.
>> + */
>> +#include <config_cmd_default.h>
>> +#undef CONFIG_CMD_FPGA
>> +#undef CONFIG_CMD_IMI
>> +#undef CONFIG_CMD_LOADS
>> +
>> +#define CONFIG_CMD_BOOTZ
>> +#define CONFIG_CMD_PING
>> +#define CONFIG_CMD_DHCP
>> +#define CONFIG_CMD_NAND
>> +#define CONFIG_CMD_SF
>> +#define CONFIG_CMD_MMC
>> +#define CONFIG_CMD_FAT
>> +
>> +#define CONFIG_NR_DRAM_BANKS 1
>> +#define CONFIG_SYS_SDRAM_BASE 0x20000000
>> +#define CONFIG_SYS_SDRAM_SIZE 0x08000000
>> +
>> +/*
>> + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
>> + * leaving the correct space for initial global data structure above
>> + * that address while providing maximum stack area below.
>> + */
>> +# define CONFIG_SYS_INIT_SP_ADDR \
>> + (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
>> +
>> +/* DataFlash */
>> +#ifdef CONFIG_CMD_SF
>> +#define CONFIG_ATMEL_SPI
>> +#define CONFIG_SPI_FLASH
>> +#define CONFIG_SPI_FLASH_ATMEL
>> +#define CONFIG_SF_DEFAULT_SPEED 30000000
>> +#define CONFIG_ENV_SPI_MODE SPI_MODE_3
>> +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
>> +#endif
>> +
>> +/* NAND flash */
>> +#ifdef CONFIG_CMD_NAND
>> +#define CONFIG_NAND_ATMEL
>> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
>> +#define CONFIG_SYS_NAND_BASE 0x40000000
>> +#define CONFIG_SYS_NAND_DBW_8
>> +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
>> +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
>> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4
>> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5
>> +
>> +/* PMECC & PMERRLOC */
>> +#define CONFIG_ATMEL_NAND_HWECC
>> +#define CONFIG_ATMEL_NAND_HW_PMECC
>> +#define CONFIG_PMECC_CAP 2
>> +#define CONFIG_PMECC_SECTOR_SIZE 512
>> +#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
>> +#endif
>> +
>> +/* MMC */
>> +#ifdef CONFIG_CMD_MMC
>> +#define CONFIG_MMC
>> +#define CONFIG_GENERIC_MMC
>> +#define CONFIG_GENERIC_ATMEL_MCI
>> +#endif
>> +
>> +/* FAT */
>> +#ifdef CONFIG_CMD_FAT
>> +#define CONFIG_DOS_PARTITION
>> +#endif
>> +
>> +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
>> +
>> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
>> +#define CONFIG_SYS_MEMTEST_END 0x26e00000
> Wasn't there some change in mtest lately? Are these configs correct then?
hmm, I don't know the mtest well, this END address is just align with
9x5 config file.
>
>> +
>> +#ifdef CONFIG_SYS_USE_SPIFLASH
>> +
>> +/* bootstrap + u-boot + env + linux in dataflash on CS0 */
>> +#define CONFIG_ENV_IS_IN_SPI_FLASH
>> +#define CONFIG_ENV_OFFSET 0x5000
>> +#define CONFIG_ENV_SIZE 0x3000
>> +#define CONFIG_ENV_SECT_SIZE 0x1000
>> +#define CONFIG_BOOTCOMMAND \
>> + "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \
>> + "bootm 0x22000000"
>> +
>> +#elif defined(CONFIG_SYS_USE_NANDFLASH)
>> +
>> +/* bootstrap + u-boot + env + linux in nandflash */
>> +#define CONFIG_ENV_IS_IN_NAND
>> +#define CONFIG_ENV_OFFSET 0xc0000
>> +#define CONFIG_ENV_OFFSET_REDUND 0x100000
>> +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
>> +#define CONFIG_BOOTCOMMAND \
>> + "nand read 0x21000000 0x180000 0x080000;" \
>> + "nand read 0x22000000 0x200000 0x400000;" \
>> + "bootm 0x22000000 - 0x21000000"
> how about mtdparts?
>
>> +
>> +#else /* CONFIG_SYS_USE_MMC */
>> +
>> +/* bootstrap + u-boot + env + linux in mmc */
>> +#define CONFIG_ENV_IS_IN_MMC
>> +/* For FAT system, most cases it should be in the reserved sector */
>> +#define CONFIG_ENV_OFFSET 0x2000
>> +#define CONFIG_ENV_SIZE 0x1000
>> +#define CONFIG_SYS_MMC_ENV_DEV 0
>> +#define CONFIG_BOOTCOMMAND \
>> + "mmcinfo;fatload mmc 0:1 0x21000000 dtb;" \
> Isn't mmcinfo the old command? AFAIR this is obsolete with
> CONFIG_MMC_GENERIC, please fix and use the newer commands.
I checked the source, seems not found the information about the mmcinfo
is old command.
But if we remove ;mmcinfo' in the bootcommand, it still works well. so I
will remove 'mmcinfo' here.
>
>> + "fatload mmc 0:1 0x22000000 uImage;" \
>> + "bootm 0x22000000 - 0x21000000"
>> +
>> +#endif
>> +
>> +#ifdef CONFIG_SYS_USE_MMC
>> +#define CONFIG_BOOTARGS \
>> + "console=ttyS0,115200 earlyprintk " \
>> + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
>> + "256k(env),256k(env_redundant),256k(spare)," \
>> + "512k(dtb),6M(kernel)ro,-(rootfs) " \
> ahh, mtdparts are here. I would prefer to move them up to the NAND part
> cause they should only be set when NAND is active. Have you seen the
> MTDIDS_DEFAULT/MTDPARTS_DEFAULT defines before? I think they are much
> better here cause you can use the mtdparts command to set correct
> mtdparts env. Then just use ${mtdparts} in your cmdline.
OK, I will define the MTDIDS_DEFAULT/MTDPARTS_DEFAULT to remove the
duplicated string.
>
>> + "root=/dev/mmcblk0p2 " \
>> + "rw rootfstype=ext4 rootwait"
>> +#else
>> +#define CONFIG_BOOTARGS \
>> + "console=ttyS0,115200 earlyprintk " \
>> + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
>> + "256k(env),256k(env_redundant),256k(spare)," \
>> + "512k(dtb),6M(kernel)ro,-(rootfs) " \
>> + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
>> +#endif
>> +
>> +#define CONFIG_SYS_PROMPT "U-Boot> "
>> +#define CONFIG_SYS_CBSIZE 256
>> +#define CONFIG_SYS_MAXARGS 16
>> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
>> +#define CONFIG_SYS_LONGHELP
>> +#define CONFIG_CMDLINE_EDITING
>> +#define CONFIG_AUTO_COMPLETE
>> +#define CONFIG_SYS_HUSH_PARSER
>> +
>> +/*
>> + * Size of malloc() pool
>> + */
>> +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
>> +
>> +#define CONFIG_STACKSIZE (32*1024) /* regular stack */
>> +
>> +#endif
>>
> Best regards
>
> Andreas Bießmann
Thanks again.
Best Regards,
Josh Wu
More information about the U-Boot
mailing list