[U-Boot] [PATCH v2 0/4] arm: atmel: add at91sam9n12ek board support

[Josh Wu]

This patch series will add at91sam9n12ek board support. In the board, 
spi/nand flash, mmc, lcd are supported.

TODO:
  - ethernet support
  - usb support.

Changes since v1:
  - split into more patches to make it clearer.
  - include an extra patch that use run-time detect for spi ip.
  - include an extra patch to remove the chip select for clock part.
  - merge at91sam9n12 register definition with at91sam9x5.
  - fix copyright issue and add maintainer.
  - disable pull-up as possible as we can.
  - add mtdparts command.
  - fix warnings and typos.

Bo Shen (1):
  spi: atmel_spi: using ip version to check whether has wdrbt

Josh Wu (3):
  arm: at91: add at91sam9n12 register definition
  arm: at91: add at91sam9n12ek board support
  at91: clock: remove chip macro for plla div2.

 MAINTAINERS                                        |    3 +
 arch/arm/cpu/arm926ejs/at91/Makefile               |    1 +
 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c  |  180 +++++++++++++++
 arch/arm/cpu/arm926ejs/at91/clock.c                |   13 +-
 arch/arm/include/asm/arch-at91/at91sam9_matrix.h   |    2 +-
 arch/arm/include/asm/arch-at91/at91sam9x5.h        |   19 +-
 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h |   17 +-
 arch/arm/include/asm/arch-at91/hardware.h          |    2 +-
 board/atmel/at91sam9n12ek/Makefile                 |   52 +++++
 board/atmel/at91sam9n12ek/at91sam9n12ek.c          |  228 +++++++++++++++++++
 boards.cfg                                         |    3 +
 drivers/spi/atmel_spi.c                            |   15 +-
 drivers/spi/atmel_spi.h                            |    2 +-
 include/configs/at91sam9n12ek.h                    |  232 ++++++++++++++++++++
 14 files changed, 751 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
 create mode 100644 board/atmel/at91sam9n12ek/Makefile
 create mode 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c
 create mode 100644 include/configs/at91sam9n12ek.h

-- 
1.7.9.5