[U-Boot] [PATCH v2 0/4] Enable CPSW on TI814x EVM

[Matt Porter]

This series adds support for CPSW on the PG1.0 TI814x EVM board. 
The V1 CPSW on TI814x requires minor register changes to the
existing driver as well as TI814x-specific pll/clock support.
An ET1011C phy driver is added to support the PHY present on the
PG1.0 EVM.

It has been tested loading/booting a Linux kernel and regression
tested on BeagleBone and EVM-SK AM33XX boards. It has also been
MAKEALL tested for all am33xx platforms.

The series applies on top of the following patches:
	- am33xx: Add required includes to some omap/am33xx code
	  http://patchwork.ozlabs.org/patch/227804/
	- Add TI814x EVM Support v4
	  http://www.mail-archive.com/u-boot@lists.denx.de/msg108356.html

Changes since v1:
	- Improved sata pll config comment and defined magic clock values
	- Added the kernel tag that the et1011c.c driver is derived from

Matt Porter (4):
  am33xx: add pll and clock support for TI814x CPSW
  cpsw: add support for TI814x slave_regs differences
  phy: add support for ET1011C phys
  ti814x_evm: enable CPSW support

 arch/arm/cpu/armv7/am33xx/clock_ti814x.c           |  103 +++++++++++++++++-
 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h |    1 +
 board/ti/ti814x/evm.c                              |   75 +++++++++++++
 board/ti/ti814x/evm.h                              |    1 +
 board/ti/ti814x/mux.c                              |   35 +++++++
 drivers/net/cpsw.c                                 |    6 ++
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/et1011c.c                          |  110 ++++++++++++++++++++
 drivers/net/phy/phy.c                              |    3 +
 include/configs/ti814x_evm.h                       |   21 ++++
 include/phy.h                                      |    1 +
 11 files changed, 355 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/phy/et1011c.c

-- 
1.7.9.5