[U-Boot] Micron MT29F8G Internal 4 BIT ECC

[Plenty, Richard]

Hi,
I was wondering if anyone has had experience of enabling the internal 4 BIT ECC used on the Micron MT29F8G08ADADAH4-IT and the Freescale QorIQ.
I'm particularly keen to see the modifications you may have done to the Special programme loader (nand_boot_fsl_elbc.c) so that the FCM error correction is replaced by the internal ECC of the Micron device once the initial stage 0 loader has completed.

Thanks in advance.



*** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com.


You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception at invensys.com. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates).