[U-Boot] [PATCH 2/2] mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used

[Peter Korsgaard]

Gets rid of warnings from omap_gpio:
ERROR : check_gpio: invalid GPIO -1

(and undefined behaviour as the -1 error code is interpreted as gpio value)

Signed-off-by: Peter Korsgaard <peter.korsgaard at barco.com>
---
 drivers/mmc/omap_hsmmc.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 67cfcc2..166744c 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -593,8 +593,6 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 	mmc->send_cmd = mmc_send_cmd;
 	mmc->set_ios = mmc_set_ios;
 	mmc->init = mmc_init_setup;
-	mmc->getcd = omap_mmc_getcd;
-	mmc->getwp = omap_mmc_getwp;
 	mmc->priv = priv_data;
 
 	switch (dev_index) {
@@ -616,7 +614,13 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 		return 1;
 	}
 	priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
+	if (priv_data->cd_gpio != -1)
+		mmc->getcd = omap_mmc_getcd;
+
 	priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
+	if (priv_data->wp_gpio != -1)
+		mmc->getwp = omap_mmc_getwp;
+
 	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 	mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
 				MMC_MODE_HC) & ~host_caps_mask;
-- 
1.7.10.4