[U-Boot] [PATCH 5/5] ARM: OMAP4/5: Make bootz as the default boot command

[Sricharan R]

So with OMAP added to multi platform kernel,
the uImage no more contains a valid load address.
With the uboot already supporting zImage,
change the default boot command to bootz
instead.

Signed-off-by: Sricharan R <r.sricharan at ti.com>
---
 include/configs/omap4_common.h |    6 +++---
 include/configs/omap5_common.h |    6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index e812e52..14833fa 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -164,10 +164,10 @@
 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
 		"env import -t ${loadaddr} ${filesize}\0" \
-	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"loadzimage=fatload mmc ${mmcdev} ${loadaddr} zImage\0" \
 	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
-		"bootm ${loadaddr} - ${fdtaddr}\0" \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
 	"findfdt="\
 		"if test $board_name = omap4_sdp4430; then " \
 			"setenv fdtfile omap4-sdp.dtb; fi; " \
@@ -188,7 +188,7 @@
 				"run uenvcmd;" \
 			"fi;" \
 		"fi;" \
-		"if run loaduimage; then " \
+		"if run loadzimage; then " \
 			"run mmcboot; " \
 		"fi; " \
 	"fi"
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 1576fa0..0df2600 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -163,10 +163,10 @@
 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
 		"env import -t ${loadaddr} ${filesize}\0" \
-	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"loadzimage=fatload mmc ${mmcdev} ${loadaddr} zImage\0" \
 	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
-		"bootm ${loadaddr} - ${fdtaddr}\0" \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
 	"findfdt="\
 		"if test $board_name = omap5_uevm; then " \
 			"setenv fdtfile omap5-uevm.dtb; fi;\0 " \
@@ -184,7 +184,7 @@
 				"run uenvcmd;" \
 			"fi;" \
 		"fi;" \
-		"if run loaduimage; then " \
+		"if run loadzimage; then " \
 			"run mmcboot; " \
 		"fi; " \
 	"fi"
-- 
1.7.9.5