[U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Abbas Raza
abbas_raza at mentor.com
Mon Mar 25 12:02:52 CET 2013
Hi,
On 03/21/2013 09:17 PM, Eric Nelson wrote:
> Thanks Abbas,
>
> Tested-by: Eric Nelson <eric.nelson at boundarydevices.com>
>
> Note that the board settings also apply to nitrogen6x and wandboard
> if you want to expand the patch a bit:
>
> http://git.denx.de/u-boot.git/?p=u-boot/u-boot-imx.git;a=blob;f=board/boundary/nitrogen6x/nitrogen6x.c;h=229c2378396d43a365d6682af35c0e519ccd69d4;hb=HEAD#l304
> http://git.denx.de/u-boot.git/?p=u-boot/u-boot-imx.git;a=blob;f=board/wandboard/wandboard.c;h=d95189f77de4c3573ec30c53e04fe1b083c1d2b5;hb=HEAD#l107
I would like to expand the patch but i cannot test it for boards you mentioned above. Are you sure these boards have 4-bit mmc buses?
>
> I also tested against a custom board with 8-bit eMMC.
>
> Regards,
>
>
> Eric
Thanks.
Abbas
More information about the U-Boot
mailing list