[U-Boot] [Patch v2, batch 2 15/23] T4/USB: Add USB 2.0 UTMI dual phy support

[York Sun]

From: Roy Zang <tie-fei.zang at freescale.com>

T4240 internal UTMI phy is different comparing to previous UTMI PHY
in P3041.
This patch adds USB 2.0 UTMI Dual PHY new memory map and enable it for
T4240.
The phy timing is very sensitive and moving the phy enable code to
cpu_init.c will not work.

Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
 arch/powerpc/include/asm/config_mpc85xx.h |    3 +--
 arch/powerpc/include/asm/immap_85xx.h     |   41 +++++++++++++++++++++++++++++
 drivers/usb/host/ehci-fsl.c               |   21 +++++++++++++++
 3 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 3740785..ca235dc 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -536,8 +536,7 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_A004468
 #define CONFIG_SYS_FSL_ERRATUM_A_004934
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 8bc047b..29ee38f 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2828,12 +2828,53 @@ typedef struct ccsr_pme {
 	u8	res4[0x400];
 } ccsr_pme_t;
 
+#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+struct ccsr_usb_port_ctrl {
+	u32	ctrl;
+	u32	drvvbuscfg;
+	u32	pwrfltcfg;
+	u32	sts;
+	u8	res_14[0xc];
+	u32	bistcfg;
+	u32	biststs;
+	u32	abistcfg;
+	u32	abiststs;
+	u8	res_30[0x10];
+	u32	xcvrprg;
+	u32	anaprg;
+	u32	anadrv;
+	u32	anasts;
+};
+
+struct ccsr_usb_phy {
+	u32	id;
+	struct  ccsr_usb_port_ctrl port1;
+	u8	res_50[0xc];
+	u32	tvr;
+	u32	pllprg[4];
+	u8	res_70[0x4];
+	u32	anaccfg;
+	u32	dbg;
+	u8	res_7c[0x4];
+	struct  ccsr_usb_port_ctrl port2;
+	u8	res_dc[0x334];
+} ccsr_usb_phy_t;
+
+#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0)
+#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
+#else
 typedef struct ccsr_usb_phy {
 	u8	res0[0x18];
 	u32	usb_enable_override;
 	u8	res[0xe4];
 } ccsr_usb_phy_t;
 #define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
+#endif
 
 #ifdef CONFIG_SYS_FSL_RAID_ENGINE
 struct ccsr_raide {
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f54b408..77c41f3 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -89,6 +89,27 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 
 	if (!strcmp(phy_type, "utmi")) {
 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+		ccsr_usb_phy_t *usb_phy =
+			(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+		setbits_be32(&usb_phy->pllprg[1],
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN	|
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN	|
+			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI		|
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+		setbits_be32(&usb_phy->port1.ctrl,
+			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+		setbits_be32(&usb_phy->port1.drvvbuscfg,
+			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+		setbits_be32(&usb_phy->port1.pwrfltcfg,
+			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+		setbits_be32(&usb_phy->port2.ctrl,
+			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+		setbits_be32(&usb_phy->port2.drvvbuscfg,
+			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+		setbits_be32(&usb_phy->port2.pwrfltcfg,
+			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+#endif
 		setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
 		setbits_be32(&ehci->control, UTMI_PHY_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
-- 
1.7.9.5