[U-Boot] [PATCH v2] mx6: Fix get_board_rev() for the mx6 solo case

[Dirk Behme]

Hi Fabio,

On 27.03.2013 18:36, Fabio Estevam wrote:
> When booting a Freescale kernel 3.0.35 on a Wandboard solo, the get_board_rev()
> returns 0x62xxx, which is not a value understood by the VPU
> (Video Processing Unit) library in the kernel and causes the video playback to
> fail.
>
> The expected values for get_board_rev are:
> 0x63xxx: For mx6quad/dual
> 0x61xxx: For mx6dual-lite/solo
>
> So adjust get_board_rev() accordingly and make it as weak function, so that we
> do not need to define it in every mx6 board file.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v1:
> - Avoid extra call to get_cpu_rev()
>
>   arch/arm/cpu/armv7/mx6/soc.c                  |   12 ++++++++++++
>   board/boundary/nitrogen6x/nitrogen6x.c        |    5 -----
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |    5 -----
>   board/freescale/mx6qsabresd/mx6qsabresd.c     |    5 -----
>   board/wandboard/wandboard.c                   |    5 -----
>   5 files changed, 12 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 193ba12..4f3cd14 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -61,6 +61,18 @@ u32 get_cpu_rev(void)
>   	return (type << 12) | (reg + 0x10);
>   }
>
> +#ifdef CONFIG_REVISION_TAG
> +u32 __weak get_board_rev(void)
> +{
> +	u32 cpurev = get_cpu_rev();
> +	u32 type = ((cpurev >> 12) & 0xff);
> +	if (type == MXC_CPU_MX6SOLO)
> +		cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
> +
> +	return cpurev;
> +}
> +#endif

This is much better than changing Troy's get_cpu_rev(). Thanks :)

But what's about to add this code to

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/kernel/setup.c?h=imx_3.0.35_1.1.0#n655

?

Best regards

Dirk