[U-Boot] [PATCH v2] mx6: Fix get_board_rev() for the mx6 solo case

[Eric Nelson]

On 03/27/2013 10:36 AM, Fabio Estevam wrote:
> When booting a Freescale kernel 3.0.35 on a Wandboard solo, the get_board_rev()
> returns 0x62xxx, which is not a value understood by the VPU
> (Video Processing Unit) library in the kernel and causes the video playback to
> fail.
>
> The expected values for get_board_rev are:
> 0x63xxx: For mx6quad/dual
> 0x61xxx: For mx6dual-lite/solo
>
> So adjust get_board_rev() accordingly and make it as weak function, so that we
> do not need to define it in every mx6 board file.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v1:
> - Avoid extra call to get_cpu_rev()
>
>   arch/arm/cpu/armv7/mx6/soc.c                  |   12 ++++++++++++
>   board/boundary/nitrogen6x/nitrogen6x.c        |    5 -----
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |    5 -----
>   board/freescale/mx6qsabresd/mx6qsabresd.c     |    5 -----
>   board/wandboard/wandboard.c                   |    5 -----
>   5 files changed, 12 insertions(+), 20 deletions(-)
>

Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>