[U-Boot] Pull request: u-boot-arm/master
Tom Rini
trini at ti.com
Fri Mar 29 01:01:40 CET 2013
On Thu, Mar 28, 2013 at 09:06:28PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> Here is a pull request for u-boot-arm/master -- note it should appear
> trivial and result in a fast-forward as ARM ToT is actually a merge of
> mainline ToT so as to resolve minor manual merge issues.
>
> The following changes since commit
> 417c55803118eb8e350d5ab8ba6583fb39f4e2e3:
>
> apx4devkit: change maintainer (2013-03-27 15:30:11 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 009d75ccc11d27b9a083375a88bb93cb746b4800:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
> 18:50:01 +0100)
>
> ----------------------------------------------------------------
>
> Akshay Saraswat (8):
> Exynos5: TMU: Add driver for Thermal Management Unit
> Exynos5: FDT: Add TMU device node values
> Exynos5: TMU: Add TMU init and status check
> Exynos5: Config: Enable support for Exynos TMU driver
> TMU: Add TMU support in dtt command
> Exynos5: Config: Enable dtt command for TMU
> Exynos5: TMU: Add hardware tripping
> Exynos5: FDT: Add a H/W-trip member to TMU node
>
> Albert ARIBAUD (4):
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
>
> Allen Martin (13):
> tegra: remove support for UART SPI switch
> tegra: spi: rename tegra SPI drivers
> tegra: spi: remove non fdt support
> tegra: spi: pull register structs out of headers
> tegra20: spi: move fdt probe to spi_init
> spi: add common fdt SPI driver interface
> sf: winbond: add W25Q32DW
> tegra114: fdt: add compatible string for tegra114 SPI ctrl
> tegra114: fdt: add apbdma block
> tegra114: fdt: add SPI blocks
> tegra114: dalmore: fdt: enable dalmore SPI controller
> tegra114: add SPI driver
> tegra114: dalmore: config: enable SPI
>
> Enric Balletbo i Serra (2):
> ARM: AM33XX: Fix typo that causes an AM duplication in CPU name.
> igep00x0: Enable CONFIG_CMD_BOOTZ
>
> Koen Kooi (3):
> am335x_evm: add support for BeagleBone Black DT name
> am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to
> env am335x_evm: Add more variables and switch to DT booting.
>
> Mark Jackson (2):
> Allow AM335x MPU core clock speed to be specified in the board
> config file Initialise correct GPMC WAITx irq for AM33xx
>
> Matt Porter (9):
> am33xx: convert defines from am33xx-specific to generic names
> am33xx: refactor emif4/ddr to support multiple EMIF instances
> am33xx: refactor am33xx clocks and add ti814x support
> am33xx: refactor am33xx mux support and add ti814x support
> am33xx: add ti814x specific register definitions
> am33xx: add dmm support to emif4 library
> am33xx: support ti814x mmc reference clock
> ns16550: enable quirks for ti814x
> ti814x_evm: add ti814x evm board support
>
> Nikita Kiryanov (1):
> cm-t35: add support for loading splash image from NAND
>
> Peter Korsgaard (2):
> mmc: mmc_getcd/getwp: use sensible defaults
> mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio
> could be used
>
> R Sricharan (2):
> ARM: mmu: Introduce weak dram_bank_setup function
> ARM: mmu: Set domain permissions to client access
>
> Rajeshwari Shinde (11):
> EXYNOS5: Add function to setup set ps hold
> SMDK5250: Add PMIC voltage settings
> EXYNOS5: Add function to enable XXTI clock source
> Sound: MAX98095: Add the driver for codec
> Sound: Support for MAX98095 codec in driver
> EXYNOS5: GPIO to enable MAX98095
> EXYNOS5: FDT: Add compatible strings for MAX98095
> config: Snow: Enable MAX98095 codec
> SMDK5250: FDT: Retrieve board model via DT
> EXYNOS5: Add initial DTS file for Snow.
> EXYNOS5: Snow: Add a configuration file
>
> Simon Glass (1):
> EXYNOS: Correct ordering of SPL machine_params
>
> Stephen Warren (9):
> ARM: bcm2835: add mailbox driver
> ARM: rpi_b: use bcm2835 mbox driver to get memory size
> lcd: calculate line_length after lcd_ctrl_init()
> ARM: rpi_b: disable rpi_b dcache explicitly
> video: add a driver for the bcm2835
> mmc: add bcm2835 driver
> ARM: rpi_b: enable SD controller, add related env/cmds
> ARM: implement erratum 716044 workaround
> ARM: tegra: enable workaround for ARM erratum 716044
>
> Steve Kipisz (1):
> am33xx:ddr:Fix config_sdram to work for all DDR
>
> Tom Rini (3):
> am33xx: Add required includes to some omap/am33xx code
> am335x_evm: Add better timings for the new BeagleBoard DDR3 part
> arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP*
> platforms
>
> Tom Warren (4):
> Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore
> for now) Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
> Tegra114: MMC: Add SD bus power-rail init routine
> Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
> boards
>
> Vaibhav Hiremath (1):
> am335x: Enable DDR PHY dynamic power down bit for DDR3 boards
>
> Vincent Stehl?? (2):
> ARM: cache: declare set_section_dcache
> armv7: do not relocate _start twice
>
> ??ukasz Majewski (1):
> mmc:sdhci:fix: Change default interrupts enabled at SDHCI
> initialization
>
> MAINTAINERS | 8 +
> Makefile | 2 +-
> README | 5 +
> arch/arm/config.mk | 2 +-
> arch/arm/cpu/arm1176/bcm2835/Makefile | 2 +-
> arch/arm/cpu/arm1176/bcm2835/mbox.c | 164 ++++++
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/am33xx/Makefile | 3 +-
> arch/arm/cpu/armv7/am33xx/board.c | 4 +-
> .../cpu/armv7/am33xx/{clock.c => clock_am33xx.c} | 33 +-
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 406
> +++++++++++++++ arch/arm/cpu/armv7/am33xx/ddr.c |
> 104 ++-- arch/arm/cpu/armv7/am33xx/emif4.c | 57 +-
> arch/arm/cpu/armv7/am33xx/mem.c | 2 +-
> arch/arm/cpu/armv7/am33xx/sys_info.c | 5 +-
> arch/arm/cpu/armv7/cache_v7.c | 3 +
> arch/arm/cpu/armv7/exynos/power.c | 45 ++
> arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 35 ++
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 1 +
> arch/arm/cpu/armv7/omap-common/timer.c | 1 +
> arch/arm/cpu/armv7/start.S | 7 +-
> arch/arm/dts/exynos5250.dtsi | 5 +
> arch/arm/dts/tegra114.dtsi | 141 +++++
> arch/arm/include/asm/arch-am33xx/clock.h | 2 +-
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 36 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 11 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 75 ++-
> arch/arm/include/asm/arch-am33xx/hardware.h | 40 +-
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 54 ++
> arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 53 ++
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 5 +
> arch/arm/include/asm/arch-am33xx/mux.h | 235 +--------
> arch/arm/include/asm/arch-am33xx/mux_am33xx.h | 247 +++++++++
> arch/arm/include/asm/arch-am33xx/mux_ti814x.h | 311 +++++++++++
> arch/arm/include/asm/arch-am33xx/omap.h | 5 +
> arch/arm/include/asm/arch-am33xx/spl.h | 5 +
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +
> arch/arm/include/asm/arch-bcm2835/mbox.h | 433
> +++++++++++++++ arch/arm/include/asm/arch-bcm2835/sdhci.h |
> 24 + arch/arm/include/asm/arch-exynos/power.h | 24 +
> arch/arm/include/asm/arch-exynos/spl.h | 3 +-
> arch/arm/include/asm/arch-exynos/tmu.h | 58 +++
> arch/arm/include/asm/arch-tegra/board.h | 3 +-
> arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 ---
> arch/arm/include/asm/arch-tegra/tegra_spi.h | 75 ---
> arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 6 +
> arch/arm/include/asm/arch-tegra114/tegra114_spi.h | 41 ++
> arch/arm/include/asm/arch-tegra20/tegra20_sflash.h | 41 ++
> arch/arm/include/asm/arch-tegra20/tegra20_slink.h | 41 ++
> arch/arm/include/asm/cache.h | 2 +
> arch/arm/include/asm/system.h | 14 +
> arch/arm/lib/cache-cp15.c | 11 +-
> board/cm_t35/cm_t35.c | 61 +++
> board/nvidia/common/board.c | 5 +-
> board/nvidia/common/common.mk | 1 -
> board/nvidia/common/uart-spi-switch.c | 125 -----
> board/nvidia/dalmore/dalmore.c | 66 +++
> board/nvidia/dalmore/pinmux-config-dalmore.h | 6 +
> board/nvidia/dts/tegra114-dalmore.dts | 18 +
> board/nvidia/seaboard/seaboard.c | 2 +-
> board/phytec/pcm051/board.c | 8 +-
> board/raspberrypi/rpi_b/rpi_b.c | 47 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 13 +
> board/samsung/dts/exynos5250-snow.dts | 58 +++
> board/samsung/smdk5250/smdk5250.c | 178 ++++++-
> board/ti/am335x/board.c | 57 +-
> board/ti/ti814x/Makefile | 46 ++
> board/ti/ti814x/evm.c | 198 +++++++
> board/ti/ti814x/evm.h | 7 +
> board/ti/ti814x/mux.c | 51 ++
> boards.cfg | 2 +
> common/cmd_dtt.c | 32 +-
> common/lcd.c | 4 +-
> doc/device-tree-bindings/exynos/tmu.txt | 44 ++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/bcm2835_sdhci.c | 189 +++++++
> drivers/mmc/mmc.c | 16 +-
> drivers/mmc/omap_hsmmc.c | 8 +-
> drivers/mmc/sdhci.c | 8 +-
> drivers/mtd/nand/omap_gpmc.c | 1 +
> drivers/mtd/spi/winbond.c | 5 +
> drivers/net/cpsw.c | 1 +
> drivers/power/Makefile | 1 +
> drivers/power/exynos-tmu.c | 319 ++++++++++++
> drivers/serial/ns16550.c | 5 +-
> drivers/sound/Makefile | 1 +
> drivers/sound/max98095.c | 550
> ++++++++++++++++++++
> drivers/sound/max98095.h | 311 +++++++++++
> drivers/sound/sound.c | 9 +-
> drivers/spi/Makefile | 6 +-
> drivers/spi/fdt_spi.c | 186 +++++++
> drivers/spi/tegra114_spi.c | 405
> ++++++++++++++ drivers/spi/{tegra_spi.c => tegra20_sflash.c} |
> 217 ++++---- drivers/spi/{tegra_slink.c => tegra20_slink.c} | 128
> +++-- drivers/video/Makefile | 1 +
> drivers/video/bcm2835.c | 127 +++++
> include/configs/am335x_evm.h | 28 +-
> include/configs/cardhu.h | 2 +-
> include/configs/cm_t35.h | 4 +
> include/configs/dalmore.h | 23 +-
> include/configs/exynos5250-dt.h | 6 +
> include/configs/igep00x0.h | 3 +-
> include/configs/pcm051.h | 3 +-
> include/configs/rpi_b.h | 79
> +++ .../uart-spi-switch.h => include/configs/snow.h | 35 +-
> include/configs/tegra-common-post.h | 4 +
> include/configs/tegra20-common.h | 1 +
> include/configs/ti814x_evm.h | 221 ++++++++
> include/configs/trimslice.h | 2 +-
> include/fdtdec.h | 3 +
> include/power/max77686_pmic.h | 32 ++
> include/sound.h | 1 +
> include/tmu.h | 46 ++
> lib/fdtdec.c | 3 +
> spl/Makefile | 2 +- 116 files
> changed, 6120 insertions(+), 882 deletions(-) create mode 100644
> arch/arm/cpu/arm1176/bcm2835/mbox.c rename
> arch/arm/cpu/armv7/am33xx/{clock.c => clock_am33xx.c} (91%) create
> mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti814x.c create mode
> 100644 arch/arm/include/asm/arch-am33xx/hardware_am33xx.h create mode
> 100644 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h create mode
> 100644 arch/arm/include/asm/arch-am33xx/mux_am33xx.h create mode
> 100644 arch/arm/include/asm/arch-am33xx/mux_ti814x.h create mode
> 100644 arch/arm/include/asm/arch-bcm2835/mbox.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/sdhci.h create mode 100644
> arch/arm/include/asm/arch-exynos/tmu.h delete mode 100644
> arch/arm/include/asm/arch-tegra/tegra_slink.h delete mode 100644
> arch/arm/include/asm/arch-tegra/tegra_spi.h create mode 100644
> arch/arm/include/asm/arch-tegra114/tegra114_spi.h create mode 100644
> arch/arm/include/asm/arch-tegra20/tegra20_sflash.h create mode 100644
> arch/arm/include/asm/arch-tegra20/tegra20_slink.h delete mode 100644
> board/nvidia/common/uart-spi-switch.c create mode 100644
> board/samsung/dts/exynos5250-snow.dts create mode 100644
> board/ti/ti814x/Makefile create mode 100644 board/ti/ti814x/evm.c
> create mode 100644 board/ti/ti814x/evm.h
> create mode 100644 board/ti/ti814x/mux.c
> create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
> create mode 100644 drivers/mmc/bcm2835_sdhci.c
> create mode 100644 drivers/power/exynos-tmu.c
> create mode 100644 drivers/sound/max98095.c
> create mode 100644 drivers/sound/max98095.h
> create mode 100644 drivers/spi/fdt_spi.c
> create mode 100644 drivers/spi/tegra114_spi.c
> rename drivers/spi/{tegra_spi.c => tegra20_sflash.c} (56%)
> rename drivers/spi/{tegra_slink.c => tegra20_slink.c} (72%)
> create mode 100644 drivers/video/bcm2835.c
> rename arch/arm/include/asm/arch-tegra20/uart-spi-switch.h =>
> include/configs/snow.h (50%) create mode 100644
> include/configs/ti814x_evm.h create mode 100644 include/tmu.h
>
> Amicalement,
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130328/c8b41188/attachment.pgp>
More information about the U-Boot
mailing list