[U-Boot] [PATCH 08/11] mtd/nand: add FTNANDC021 NAND flash controller support
Kuo-Jung Su
dantesu at gmail.com
Fri Mar 29 08:06:25 CET 2013
From: Kuo-Jung Su <dantesu at faraday-tech.com>
Faraday FTNANDC021 is a integrated NAND flash controller.
It use a build-in command table to abstract the underlying
NAND flash control logic.
For example:
Issuing a command 0x10 to FTNANDC021 would result in
a page write + a read status operation.
Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
---
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/ftnandc021.c | 550 +++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/ftnandc021.h | 165 +++++++++++++
3 files changed, 716 insertions(+)
create mode 100644 drivers/mtd/nand/ftnandc021.c
create mode 100644 drivers/mtd/nand/ftnandc021.h
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c77c0c4..16b5016 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -63,6 +63,7 @@ COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_FSMC) += fsmc_nand.o
+COBJS-$(CONFIG_NAND_FTNANDC021) += ftnandc021.o
COBJS-$(CONFIG_NAND_JZ4740) += jz4740_nand.o
COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
diff --git a/drivers/mtd/nand/ftnandc021.c b/drivers/mtd/nand/ftnandc021.c
new file mode 100644
index 0000000..095206a
--- /dev/null
+++ b/drivers/mtd/nand/ftnandc021.c
@@ -0,0 +1,550 @@
+/*
+ * Faraday NAND Flash Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <malloc.h>
+
+#include "ftnandc021.h"
+
+/* common bitmask of nand flash status register */
+#define NAND_IOSTATUS_ERROR BIT(0)
+#define NAND_IOSTATUS_READY BIT(6)
+#define NAND_IOSTATUS_UNPROTCT BIT(7)
+
+struct ftnandc021_chip {
+ void *iobase;
+ unsigned int cmd;
+
+ unsigned int pgidx;
+
+ unsigned int off;
+ uint8_t buf[256];
+
+ unsigned int adrc; /* address cycle */
+ unsigned int pgsz; /* page size */
+ unsigned int bksz; /* block size */
+};
+
+/* Register access macros */
+#define NAND_REG32(priv, off) \
+ *(volatile uint32_t *)((uint32_t)((priv)->iobase) + (off))
+
+static struct nand_ecclayout ftnandc021_oob_2k = {
+ .eccbytes = 24,
+ .eccpos = {
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63
+ },
+ .oobfree = {
+ {
+ .offset = 9,
+ .length = 3
+ }
+ }
+};
+
+static int
+ftnandc021_reset(struct nand_chip *chip)
+{
+ struct ftnandc021_chip *priv = chip->priv;
+ uint32_t bk = 2; /* 64 pages */
+ uint32_t pg = 1; /* 2k */
+ uint32_t ac = 2; /* 5 */
+ uint32_t mask = NANDC_NANDC_SW_RESET | NANDC_BMC_SW_RESET | NANDC_ECC_SW_RESET;
+
+#ifdef CONFIG_FTNANDC021_ACTIMING_1
+ NAND_REG32(priv, REG_AC1_CONTROL) = CONFIG_FTNANDC021_ACTIMING_1;
+#endif
+#ifdef CONFIG_FTNANDC021_ACTIMING_2
+ NAND_REG32(priv, REG_AC2_CONTROL) = CONFIG_FTNANDC021_ACTIMING_2;
+#endif
+
+ NAND_REG32(priv, REG_INT_EN) = 0;
+ NAND_REG32(priv, REG_PAGE_INDEX) = 0;
+ NAND_REG32(priv, REG_WRITE_BI) = 0xff;
+ NAND_REG32(priv, REG_WRITE_LSN_CRC) = 0xffffffff;
+ if (chip->options & NAND_BUSWIDTH_16)
+ NAND_REG32(priv, REG_FLOW_CONTROL) = BIT(8) | BIT(7) | NANDC_IO_WIDTH_16BIT;
+ else
+ NAND_REG32(priv, REG_FLOW_CONTROL) = BIT(8) | BIT(7) | NANDC_IO_WIDTH_8BIT;
+
+ /* chip reset */
+ NAND_REG32(priv, REG_MLC_SW_RESET) = mask;
+
+ /* wait until chip ready */
+ while (NAND_REG32(priv, REG_MLC_SW_RESET) & BIT(0))
+ ;
+
+ switch (priv->bksz / priv->pgsz) {
+ case 16:
+ bk = 0;
+ break;
+ case 32:
+ bk = 1;
+ break;
+ case 64:
+ bk = 2;
+ break;
+ case 128:
+ bk = 3;
+ break;
+ }
+
+ switch (priv->pgsz) {
+ case 512:
+ pg = 0;
+ break;
+ case 2048:
+ pg = 1;
+ break;
+ case 4096:
+ pg = 2;
+ break;
+ }
+
+ switch (priv->adrc) {
+ case 3:
+ ac = 0;
+ break;
+ case 4:
+ ac = 1;
+ break;
+ case 5:
+ ac = 2;
+ break;
+ }
+
+ NAND_REG32(priv, REG_MEMORY_CONFIG) = NANDC_MS_32GB | NANDC_MOD0_ENABLE
+ | (bk << 16) | (pg << 8) | (ac << 10);
+
+ /* PIO mode */
+ NAND_REG32(priv, REG_BMC_PIO_MODE_READY) = 0;
+
+ return 0;
+}
+
+static inline int
+ftnandc021_ckst(struct ftnandc021_chip *priv)
+{
+ uint32_t st = NAND_REG32(priv, REG_DEV_ID_BYTE47);
+
+ if (st & NAND_IOSTATUS_ERROR)
+ return -NAND_IOSTATUS_ERROR;
+
+ if (!(st & NAND_IOSTATUS_READY))
+ return -NAND_IOSTATUS_READY;
+
+ if (!(st & NAND_IOSTATUS_UNPROTCT))
+ return -NAND_IOSTATUS_UNPROTCT;
+
+ return 0;
+}
+
+static inline int
+ftnandc021_wait(struct ftnandc021_chip *priv)
+{
+ uint32_t t;
+ int rc = -1;
+
+ for (t = get_timer(0); get_timer(t) < 200; ) {
+ if (!(NAND_REG32(priv, REG_ACCESS_CONTROL) & NANDC_CMD_LAUNCH)) {
+ rc = 0;
+ break;
+ }
+ }
+
+ return rc;
+}
+
+static int
+ftnandc021_command(struct ftnandc021_chip *priv, uint32_t cmd)
+{
+ int rc = 0;
+
+ NAND_REG32(priv, REG_ACCESS_CONTROL) = NANDC_CMD_LAUNCH | (cmd << NANDC_CMD_OFFSET);
+
+ /*
+ * pgread : (We have queued data at the IO port)
+ * pgwrite : nand_ckst (We have queued data at the IO port)
+ * bkerase : nand_wait + nand_ckst
+ * oobwr : nand_wait + nand_ckst
+ * otherwise : nand_wait
+ */
+ switch (cmd) {
+ case NANDC_CMD_PAGE_READ:
+ break;
+ case NANDC_CMD_PAGE_WRITE_RS:
+ rc = ftnandc021_ckst(priv);
+ break;
+ case NANDC_CMD_BLK_ERASE_RS:
+ case NANDC_CMD_SPARE_WRITE_RS:
+ rc = ftnandc021_wait(priv) || ftnandc021_ckst(priv);
+ break;
+ default:
+ rc = ftnandc021_wait(priv);
+ }
+
+ return rc;
+}
+
+/*
+ * Check hardware register for wait status. Returns 1 if device is ready,
+ * 0 if it is still busy.
+ */
+static int
+ftnandc021_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+ int rc = 1;
+
+ if (ftnandc021_wait(priv) || ftnandc021_ckst(priv))
+ rc = 0;
+
+ return rc;
+}
+
+static void
+ftnandc021_read_oob(struct mtd_info *mtd, uint8_t * buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+ uint32_t tmp;
+
+ /*
+ * Bad Block Information:
+ * 1. Large Page(2048, 4096): off=0, len=2
+ * 2. Small Page(512): off=5, len=1
+ */
+ buf[0] = NAND_REG32(priv, REG_READ_BI) & 0xFF;
+ buf[1] = 0xFF;
+
+ tmp = NAND_REG32(priv, REG_READ_LSN_CRC);
+ buf[8] = (tmp >> 0) & 0xFF;
+ buf[9] = (tmp >> 8) & 0xFF;
+ if (mtd->writesize >= 4096) {
+ buf[12] = (tmp >> 16) & 0xFF;
+ buf[13] = (tmp >> 24) & 0xFF;
+ }
+
+ tmp = NAND_REG32(priv, REG_READ_LSN);
+ buf[10] = (tmp >> 0) & 0xFF;
+ buf[11] = (tmp >> 8) & 0xFF;
+ if (mtd->writesize >= 4096) {
+ buf[14] = (tmp >> 16) & 0xFF;
+ buf[15] = (tmp >> 24) & 0xFF;
+ }
+}
+
+static void
+ftnandc021_write_oob(struct mtd_info *mtd, const uint8_t * buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+ uint32_t tmp;
+
+ NAND_REG32(priv, REG_WRITE_BI) = buf[0];
+
+ tmp = buf[8] | (buf[9] << 8);
+ if (mtd->writesize >= 4096)
+ tmp |= (buf[12] << 16) | (buf[13] << 24);
+ NAND_REG32(priv, REG_WRITE_LSN_CRC) = tmp;
+
+ tmp = buf[10] | (buf[11] << 8);
+ if (mtd->writesize >= 4096)
+ tmp |= (buf[14] << 16) | (buf[15] << 24);
+ NAND_REG32(priv, REG_LSN_CONTROL) = tmp;
+}
+
+static uint8_t
+ftnandc021_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+ uint8_t rc = 0xFF;
+
+ switch (priv->cmd) {
+ case NAND_CMD_READID:
+ case NAND_CMD_READOOB:
+ rc = priv->buf[priv->off % 256];
+ priv->off += 1;
+ break;
+ case NAND_CMD_STATUS:
+ rc = (uint8_t)(NAND_REG32(priv, REG_DEV_ID_BYTE47) & 0xFF);
+ break;
+ default:
+ printf("ftnandc021_read_byte...not supported cmd(0x%02X)!?\n", priv->cmd);
+ break;
+ }
+
+ return rc;
+}
+
+static uint16_t
+ftnandc021_read_word(struct mtd_info *mtd)
+{
+ uint16_t rc = 0xFFFF;
+ uint8_t *buf = (uint8_t *)&rc;
+
+ buf[0] = ftnandc021_read_byte(mtd);
+ buf[1] = ftnandc021_read_byte(mtd);
+
+ return rc;
+}
+
+/**
+ * Read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void
+ftnandc021_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+ uint32_t off;
+
+ if ((uint32_t)buf & 0x03) {
+ printf("ftnandc021_read_buf: buf at 0x%08X is not aligned\n", (uint32_t)buf);
+ return;
+ }
+
+ /* oob read */
+ if (len <= mtd->oobsize) {
+ ftnandc021_read_oob(mtd, buf, len);
+ return;
+ }
+
+ /* page read */
+ for (off = 0; len > 0; len -= 4, off += 4) {
+ ulong ts = get_timer(0);
+ do {
+ if (NAND_REG32(priv, 0x208) & BIT(0))
+ break;
+ } while (get_timer(ts) < CONFIG_SYS_HZ);
+
+ if (!(NAND_REG32(priv, 0x208) & BIT(0))) {
+ printf("ftnandc021_read_buf: data timeout (cmd=0x%02X)\n", priv->cmd);
+ return;
+ }
+ *(uint32_t *)(buf + off) = NAND_REG32(priv, REG_BMC_DATA_PORT);
+ }
+
+ if (ftnandc021_wait(priv))
+ printf("ftnandc021_read_buf: command timeout (cmd=0x%02X)\n", priv->cmd);
+}
+
+/**
+ * Write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void
+ftnandc021_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+ uint32_t off;
+
+ if ((uint32_t)buf & 0x03) {
+ printf("ftnandc021_write_buf: buf at 0x%08X is not aligned\n", (uint32_t)buf);
+ return;
+ }
+
+ /* 1. oob write */
+ if (len <= mtd->oobsize)
+ return;
+
+ /* 2. page write */
+ for (off = 0; len > 0; len -= 4, off += 4) {
+ while (!(NAND_REG32(priv, 0x208) & BIT(0)))
+ ;
+ NAND_REG32(priv, REG_BMC_DATA_PORT) = *(uint32_t *)(buf + off);
+ }
+
+ /* 3. wait until command finish */
+ if (ftnandc021_wait(priv))
+ printf("ftnandc021_write_buf: write fail\n");
+}
+
+/**
+ * Verify chip data against buffer
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
+ */
+static int
+ftnandc021_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int rc = 0;
+ uint8_t *tmp;
+
+ len = min_t(int, len, mtd->writesize);
+ tmp = malloc(mtd->writesize);
+
+ if (tmp == NULL) {
+ printf("ftnandc021_verify_buf: out of memory\n");
+ return -1;
+ } else {
+ ftnandc021_read_buf(mtd, tmp, len);
+ if (memcmp(tmp, buf, len))
+ rc = -2;
+ }
+
+ free(tmp);
+
+ if (rc)
+ printf("ftnandc021_verify_buf...failed (buf@%p, len=%d)\n", buf, len);
+
+ return rc;
+}
+
+static void
+ftnandc021_cmdfunc(struct mtd_info *mtd, unsigned cmd, int column, int pgidx)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ftnandc021_chip *priv = chip->priv;
+
+ priv->cmd = cmd;
+ priv->pgidx = pgidx;
+
+ switch (cmd) {
+ case NAND_CMD_READID: /* 0x90 */
+ if (ftnandc021_command(priv, NANDC_CMD_READ_ID)) {
+ printf("ftnandc021_cmdfunc: RDID failed.\n");
+ } else {
+ uint32_t tmp;
+ tmp = NAND_REG32(priv, REG_DEV_ID_BYTE03);
+ memcpy(priv->buf + 0, &tmp, 4);
+ tmp = NAND_REG32(priv, REG_DEV_ID_BYTE47);
+ memcpy(priv->buf + 4, &tmp, 4);
+ priv->off = 0;
+ }
+ break;
+
+ case NAND_CMD_READ0: /* 0x00 */
+ NAND_REG32(priv, REG_PAGE_INDEX) = pgidx;
+ NAND_REG32(priv, REG_PAGE_COUNT) = 1;
+ if (ftnandc021_command(priv, NANDC_CMD_PAGE_READ))
+ printf("ftnandc021_cmdfunc: PGREAD failed.\n");
+ break;
+
+ case NAND_CMD_READOOB: /* 0x50 */
+ NAND_REG32(priv, REG_PAGE_INDEX) = pgidx;
+ NAND_REG32(priv, REG_PAGE_COUNT) = 1;
+ if (ftnandc021_command(priv, NANDC_CMD_SPARE_READ)) {
+ printf("ftnandc021_cmdfunc: OOBREAD failed.\n");
+ } else {
+ ftnandc021_read_oob(mtd, priv->buf, mtd->oobsize);
+ priv->off = 0;
+ }
+ break;
+
+ case NAND_CMD_ERASE1: /* 0x60 */
+ NAND_REG32(priv, REG_PAGE_INDEX) = pgidx;
+ NAND_REG32(priv, REG_PAGE_COUNT) = 1;
+ break;
+
+ case NAND_CMD_ERASE2: /* 0xD0 */
+ if (ftnandc021_command(priv, NANDC_CMD_BLK_ERASE_RS))
+ printf("ftnandc021_cmdfunc: ERASE failed, pgidx=%d\n", pgidx);
+ break;
+
+ case NAND_CMD_STATUS: /* 0x70 */
+ if (ftnandc021_command(priv, NANDC_CMD_READ_STS))
+ printf("ftnandc021_cmdfunc: STREAD failed.\n");
+ break;
+
+ case NAND_CMD_SEQIN: /* 0x80 (Write Stage 1.) */
+ ftnandc021_write_oob(mtd, chip->oob_poi, mtd->writesize);
+
+ NAND_REG32(priv, REG_PAGE_INDEX) = pgidx;
+ NAND_REG32(priv, REG_PAGE_COUNT) = 1;
+ if (column >= mtd->writesize) {
+ if (ftnandc021_command(priv, NANDC_CMD_SPARE_WRITE_RS))
+ printf("ftnandc021_cmdfunc: oob write failed..\n");
+ } else {
+ if (ftnandc021_command(priv, NANDC_CMD_PAGE_WRITE_RS))
+ printf("ftnandc021_cmdfunc: page write failed..\n");
+ }
+ break;
+
+ case NAND_CMD_PAGEPROG: /* 0x10 (Write Stage 2.) */
+ break;
+
+ case NAND_CMD_RESET: /* 0xFF */
+ if (ftnandc021_command(priv, NANDC_CMD_RESET))
+ printf("ftnandc021_cmdfunc: RESET failed.\n");
+ break;
+
+ default:
+ printf("ftnandc021_cmdfunc: error, unsupported command (0x%x).\n", cmd);
+ }
+}
+
+/**
+ * hardware specific access to control-lines
+ * @mtd: MTD device structure
+ * @cmd: command to device
+ * @ctrl:
+ * NAND_NCE: bit 0 -> don't care
+ * NAND_CLE: bit 1 -> Command Latch
+ * NAND_ALE: bit 2 -> Address Latch
+ *
+ * NOTE: boards may use different bits for these!!
+ */
+static void
+ftnandc021_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+}
+
+int
+ftnandc021_probe(struct nand_chip *chip)
+{
+ struct ftnandc021_chip *priv;
+
+ priv = malloc(sizeof(struct ftnandc021_chip));
+ if (!priv)
+ return -1;
+
+ memset(priv, 0, sizeof(*priv));
+ priv->iobase = (void *)CONFIG_NAND_FTNANDC021_BASE;
+ priv->adrc = (unsigned int)chip->priv;
+ priv->pgsz = 1 << chip->page_shift;
+ priv->bksz = 1 << chip->phys_erase_shift;
+
+ chip->priv = priv;
+ chip->cmd_ctrl = ftnandc021_hwcontrol;
+ chip->cmdfunc = ftnandc021_cmdfunc;
+ chip->dev_ready = ftnandc021_dev_ready;
+ chip->chip_delay = 0;
+
+ chip->read_byte = ftnandc021_read_byte;
+ chip->read_word = ftnandc021_read_word;
+ chip->read_buf = ftnandc021_read_buf;
+ chip->write_buf = ftnandc021_write_buf;
+ chip->verify_buf = ftnandc021_verify_buf;
+
+ chip->ecc.mode = NAND_ECC_NONE;
+ chip->ecc.layout = &ftnandc021_oob_2k;
+
+ chip->options |= NAND_NO_AUTOINCR;
+
+ ftnandc021_reset(chip);
+
+ debug("ftnandc021: pg=%dK, bk=%dK, adrc=%d\n",
+ priv->pgsz >> 10, priv->bksz >> 10, priv->adrc);
+
+ return 0;
+}
diff --git a/drivers/mtd/nand/ftnandc021.h b/drivers/mtd/nand/ftnandc021.h
new file mode 100644
index 0000000..cf5d955
--- /dev/null
+++ b/drivers/mtd/nand/ftnandc021.h
@@ -0,0 +1,165 @@
+/*
+ * Faraday NAND Flash Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu at faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __FTNANDC021_H
+#define __FTNANDC021_H
+
+#ifndef BIT
+#define BIT(nr) (1UL << (nr))
+#endif
+
+/* SMC Register Offset Definitions */
+/** ECC control register **/
+#define REG_ECC_PARITY0 0x00
+#define REG_ECC_PARITY1 0x04
+#define REG_ECC_PARITY2 0x08
+#define REG_ECC_PARITY3 0x0C
+#define REG_ECC_STATUS 0x10
+
+/** NANDC control register **/
+#define REG_HOST_STATUS 0x100
+#define REG_ACCESS_CONTROL 0x104
+#define REG_FLOW_CONTROL 0x108
+#define REG_PAGE_INDEX 0x10C
+#define REG_MEMORY_CONFIG 0x110
+#define REG_AC1_CONTROL 0x114
+#define REG_AC2_CONTROL 0x118
+#define REG_TARGET_PAGE_INDEX 0x11C
+#define REG_DEV_ID_BYTE03 0x120
+#define REG_DEV_ID_BYTE47 0x124
+#define REG_INT_EN 0x128
+#define REG_INT_STS_CLEAR 0x12C
+#define REG_FLASH0_BLK_OFFSET 0x130
+#define REG_FLASH1_BLK_OFFSET 0x134
+#define REG_FLASH2_BLK_OFFSET 0x138
+#define REG_FLASH3_BLK_OFFSET 0x13C
+#define REG_WRITE_BI 0x140
+#define REG_WRITE_LSN 0x144
+#define REG_WRITE_LSN_CRC 0x148
+#define REG_LSN_CONTROL 0x14C
+#define REG_READ_BI 0x150
+#define REG_READ_LSN 0x154
+#define REG_READ_LSN_CRC 0x158
+
+#define REG_F0_CB_TGT_BLK_OFFSET 0x160
+#define REG_F1_CB_TGT_BLK_OFFSET 0x164
+#define REG_F2_CB_TGT_BLK_OFFSET 0x168
+#define REG_F3_CB_TGT_BLK_OFFSET 0x16c
+
+#define REG_F0_LSN_INIT 0x170
+#define REG_F1_LSN_INIT 0x174
+#define REG_F2_LSN_INIT 0x178
+#define REG_F3_LSN_INIT 0x17C
+
+/** BMC control register **/
+#define REG_BMC_INT 0x204
+#define REG_BMC_BURST_TX_MODE 0x208
+#define REG_BMC_PIO_MODE_READY 0x20C
+
+/** MISC register **/
+#define REG_BMC_DATA_PORT 0x300
+#define REG_MLC_INT_CONTROL 0x304
+#define REG_PAGE_COUNT 0x308
+#define REG_MLC_SW_RESET 0x30C
+#define REG_REVISION 0x3F8
+#define REG_CONFIGURATION 0x3FC
+
+
+#define NANDC_MLC_ECC_EN BIT(8)
+#define NANDC_NANDC_SW_RESET BIT(2)
+#define NANDC_BMC_SW_RESET BIT(1)
+#define NANDC_ECC_SW_RESET BIT(0)
+
+/* 0x10: ECC status register */
+#define NANDC_ECC_CORR_FAIL BIT(3)
+#define NANDC_ECC_ERR_OCCUR BIT(2)
+#define NANDC_ECC_DEC_CP BIT(1)
+#define NANDC_ECC_ENC_CP BIT(0)
+
+/* 0x100: NAND flash host controller status register */
+#define NANDC_BLANK_CHECK_FAIL BIT(7)
+#define NANDC_ECC_FAIL_TIMEOUT BIT(5)
+#define NANDC_STS_FAIL BIT(4)
+#define NANDC_LSN_CRC_FAIL BIT(3)
+#define NANDC_CMD_CP BIT(2)
+#define NANDC_BUSY BIT(1)
+#define NANDC_CHIP_ENABLE BIT(0)
+
+/* 0x104: Access control register */
+#define NANDC_CMD_READ_ID 1
+#define NANDC_CMD_RESET 2
+#define NANDC_CMD_READ_STS 4
+#define NANDC_CMD_READ_EDC_STS 11
+#define NANDC_CMD_PAGE_READ 5
+#define NANDC_CMD_SPARE_READ 6
+#define NANDC_CMD_BLANK_CHK 28
+#define NANDC_CMD_PAGE_WRITE_RS 16
+#define NANDC_CMD_BLK_ERASE_RS 17
+#define NANDC_CMD_COPY_BACK_RS 18
+#define NANDC_CMD_SPARE_WRITE_RS 19
+#define NANDC_CMD_2P_PAGE_WRITE_RS 24
+#define NANDC_CMD_2P_BLK_ERASE_RS 25
+#define NANDC_CMD_2P_COPY_BACK_RS 26
+#ifdef FLASH_PAGE_4K
+#define NANDC_CMD_SPARE_READALL 14
+#endif
+
+#define NANDC_CMD_OFFSET 8
+
+#define NANDC_CMD_LAUNCH BIT(7)
+
+/* 0x108: Flow control register */
+#define NANDC_IO_WIDTH_16BIT BIT(4)
+#define NANDC_WP BIT(3)
+#define NANDC_PASS_STATUS_CHK_FAIL BIT(2)
+#define NANDC_MICRON_CMD BIT(1)
+#define NANDC_SKIP_ZERO_BLANK_CHK BIT(0)
+#define NANDC_IO_WIDTH_8BIT 0
+
+/* 0x110: Memory module configuration register */
+#define NANDC_BS_16P 0
+#define NANDC_BS_32P (1 << 16)
+#define NANDC_BS_64P (2 << 16)
+#define NANDC_BS_128P (3 << 16)
+
+#define NANDC_MA_SINGLE 0
+#define NANDC_MA_TWO_PLANE (1 << 14)
+
+#define NANDC_IT_NI 0
+#define NANDC_IT_TWO (1 << 12)
+#define NANDC_IT_FOUR (2 << 12)
+
+#define NANDC_AP_3C 0
+#define NANDC_AP_4C (1 << 10)
+#define NANDC_AP_5C (2 << 10)
+
+#define NANDC_PS_512 0
+#define NANDC_PS_2K (1 << 8)
+#define NANDC_PS_4K (2 << 8)
+
+#define NANDC_MS_16MB 0
+#define NANDC_MS_32MB (1 << 4)
+#define NANDC_MS_64MB (2 << 4)
+#define NANDC_MS_128MB (3 << 4)
+#define NANDC_MS_256MB (4 << 4)
+#define NANDC_MS_512MB (5 << 4)
+#define NANDC_MS_1GB (6 << 4)
+#define NANDC_MS_2GB (7 << 4)
+#define NANDC_MS_4GB (8 << 4)
+#define NANDC_MS_8GB (9 << 4)
+#define NANDC_MS_16GB (10 << 4)
+#define NANDC_MS_32GB (11 << 4)
+
+#define NANDC_MOD0_ENABLE BIT(0)
+#define NANDC_MOD1_ENABLE BIT(1)
+#define NANDC_MOD2_ENABLE BIT(2)
+#define NANDC_MOD3_ENABLE BIT(3)
+
+#endif /* EOF */
--
1.7.9.5
More information about the U-Boot
mailing list