[U-Boot] [PATCH v2 3/3] Add TI816X evm board support
TENART Antoine
atenart at adeneo-embedded.com
Fri Mar 29 18:42:41 CET 2013
Signed-off-by: Antoine Tenart <atenart at adeneo-embedded.com>
---
MAINTAINERS | 4 +
arch/arm/include/asm/arch-am33xx/spl.h | 9 +
board/ti/ti816x/Makefile | 48 ++
board/ti/ti816x/evm.c | 866 ++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/ti816x_evm.h | 177 +++++++
6 files changed, 1105 insertions(+)
create mode 100644 board/ti/ti816x/Makefile
create mode 100644 board/ti/ti816x/evm.c
create mode 100644 include/configs/ti816x_evm.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 6b2202c..3aaac7f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -922,6 +922,10 @@ Lucas Stach <dev at lynxeye.de>
colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core)
+Antoine Tenart <atenart at adeneo-embedded.com>
+
+ TI816X ARM ARMV7 (TI816x Soc)
+
Nick Thompson <nick.thompson at gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 9b5fe9e..d0c1ec9 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -23,6 +23,14 @@
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_SPL_H_
+#if defined(CONFIG_TI816X)
+#define BOOT_DEVICE_XIP 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_MMC1 6
+#define BOOT_DEVICE_MMC2 5
+#define BOOT_DEVICE_UART 0x43
+#define BOOT_DEVICE_MMC2_2 0xFF
+#else
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 5
#ifdef CONFIG_AM33XX
@@ -37,3 +45,4 @@
#define BOOT_DEVICE_CPGMAC 70
#define BOOT_DEVICE_MMC2_2 0xFF
#endif
+#endif
diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile
new file mode 100644
index 0000000..59128ee
--- /dev/null
+++ b/board/ti/ti816x/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+# Antoine Tenart, <atenart at adeneo-embedded.com>
+#
+# Based on TI-PSP-04.00.02.14 :
+#
+# Copyright (C) 2009, Texas Instruments, Incorporated
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation version 2.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := evm.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
+
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
new file mode 100644
index 0000000..bb9d604
--- /dev/null
+++ b/board/ti/ti816x/evm.c
@@ -0,0 +1,866 @@
+/*
+ * evm.c
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart at adeneo-embedded.com>
+ *
+ * Based on TI-PSP-04.00.02.14 :
+ *
+ * Copyright (C) 2009, Texas Instruments, Incorporated
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_TI816X_DDR3_SW_LEVELING
+static void ddr3_sw_levelling(int emif);
+#endif
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ return 0;
+}
+
+#if defined(CONFIG_SPL_BUILD)
+
+static struct module_pin_mux mmc_pin_mux[] = {
+ { OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) },
+ { OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) },
+ { OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+ { OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+ { OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+ { OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+ { OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+ { -1 },
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+ .dmm_lisa_map_0 = 0x00000000,
+ .dmm_lisa_map_1 = 0x00000000,
+ .dmm_lisa_map_2 = 0x80640300,
+ .dmm_lisa_map_3 = 0xC0640320,
+};
+
+/*
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ */
+static inline void delay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+ "bne 1b" : "=r" (loops) : "0"(loops));
+}
+
+/* assume delay is aprox at least 1us */
+void ddr_delay(int d)
+{
+ int i;
+
+ /*
+ * read a control module register.
+ * this is a bit more delay and cannot be optimized by the compiler
+ * assuming one read takes 200 cycles and A8 is runing 1 GHz
+ * somewhat conservative setting
+ */
+ for (i = 0; i < 50*d; i++)
+ readl(CONTROL_STATUS);
+}
+
+#ifdef CONFIG_TI816X_EVM_DDR3
+/*
+ * Init DDR3 on TI816X EVM
+ */
+static void ddr_init_settings(int emif)
+{
+ /*
+ * DLL Lockdiff DLL_Lockdiff determines effectively is the
+ * threshold internal to the DLL to indicate that the DLL has
+ * lost lock. When this happens the PHY currently issues an
+ * internal reset. The reset value for this is 0x4, which is
+ * insufficient. Set this to 15 (maximum possible - to
+ * prevent this reset. If the reset happens it would cause
+ * the data to be corrupted.
+ */
+ if (0 == get_cpu_rev()) {
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x028);
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x05C);
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x090);
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x138);
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x1DC);
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x280);
+ writel(0xF, DDRPHY_CONFIG_BASE + 0x324);
+ }
+
+ /*
+ * setup use_rank_delays to 1. This is only necessary when
+ * multiple ranks are in use. Though the EVM does not have
+ * multiple ranks, this is a good value to set.
+ */
+ writel(1, DDRPHY_CONFIG_BASE + 0x134);
+ writel(1, DDRPHY_CONFIG_BASE + 0x1d8);
+ writel(1, DDRPHY_CONFIG_BASE + 0x27c);
+ writel(1, DDRPHY_CONFIG_BASE + 0x320);
+
+ /* see ddr_defs.h for invert clock setting and details */
+ /* invert_clk_out cmd0 */
+ writel(INVERT_CLOCK, DDRPHY_CONFIG_BASE + 0x02C);
+ /* invert_clk_out cmd0 */
+ writel(INVERT_CLOCK, DDRPHY_CONFIG_BASE + 0x060);
+ /* invert_clk_out cmd0 */
+ writel(INVERT_CLOCK, DDRPHY_CONFIG_BASE + 0x094);
+
+ /* with inv clkout: 0x100. no inv clkout: 0x80. See ddr_defs.h */
+ /* cmd0 slave ratio */
+ writel(CMD_SLAVE_RATIO, DDRPHY_CONFIG_BASE + 0x01C);
+ /* cmd1 slave ratio */
+ writel(CMD_SLAVE_RATIO, DDRPHY_CONFIG_BASE + 0x050);
+ /* cmd2 slave ratio */
+ writel(CMD_SLAVE_RATIO, DDRPHY_CONFIG_BASE + 0x084);
+
+ /* for ddr3 this needs to be set to 1 */
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x0F8); /* init mode */
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x104);
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x19C);
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x1A8);
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x240);
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x24C);
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x2E4);
+ writel(0x1, DDRPHY_CONFIG_BASE + 0x2F0);
+
+ /**** setup the initial levelinihg ratios ****/
+ /*
+ * These are derived from board delays and may be different for
+ * different boards see ddr_defs.h
+ * We are setting the values here for both the ranks, though only
+ * one is in use
+ */
+
+ /* data0 writelvl init ratio */
+ writel((WR_DQS_RATIO_3 << 10) | WR_DQS_RATIO_3,
+ DDRPHY_CONFIG_BASE + 0x0F0);
+ writel(0x00000, DDRPHY_CONFIG_BASE + 0x0F4);
+ /* data1 writelvl init ratio */
+ writel((WR_DQS_RATIO_2 << 10) | WR_DQS_RATIO_2,
+ DDRPHY_CONFIG_BASE + 0x194);
+ writel(0x00000, DDRPHY_CONFIG_BASE + 0x198);
+ /* data2 writelvl init ratio */
+ writel((WR_DQS_RATIO_1 << 10) | WR_DQS_RATIO_1,
+ DDRPHY_CONFIG_BASE + 0x238);
+ writel(0x00000, DDRPHY_CONFIG_BASE + 0x23c);
+ /* data3 writelvl init ratio */
+ writel((WR_DQS_RATIO_0 << 10) | WR_DQS_RATIO_0,
+ DDRPHY_CONFIG_BASE + 0x2dc);
+ writel(0x00000, DDRPHY_CONFIG_BASE + 0x2e0);
+
+
+ /* data0 gatelvl init ratio */
+ writel((RD_GATE_RATIO_3 << 10) | RD_GATE_RATIO_3,
+ DDRPHY_CONFIG_BASE + 0x0FC);
+ writel(0x0, DDRPHY_CONFIG_BASE + 0x100);
+ /* data1 gatelvl init ratio */
+ writel((RD_GATE_RATIO_2 << 10) | RD_GATE_RATIO_2,
+ DDRPHY_CONFIG_BASE + 0x1A0);
+ writel(0x0, DDRPHY_CONFIG_BASE + 0x1A4);
+ /* data2 gatelvl init ratio */
+ writel((RD_GATE_RATIO_1 << 10) | RD_GATE_RATIO_1,
+ DDRPHY_CONFIG_BASE + 0x244);
+ writel(0x0, DDRPHY_CONFIG_BASE + 0x248);
+ /* data3 gatelvl init ratio */
+ writel((RD_GATE_RATIO_0 << 10) | RD_GATE_RATIO_0,
+ DDRPHY_CONFIG_BASE + 0x2E8);
+ writel(0x0, DDRPHY_CONFIG_BASE + 0x2EC);
+
+ /* cmd0 io config - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x00C);
+ /* cmd0 io clk config - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x010);
+ /* cmd1 io config - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x040);
+ /* cmd1 io clk config - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x044);
+ /* cmd2 io config - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x074);
+ /* cmd2 io clk config - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x078);
+ /* data0 io config - output impedance of pad */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x0A8);
+ /* data0 io clk config - output impedance of pad */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x0AC);
+ /* data1 io config - output impedance of pad */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x14C);
+ /* data1 io clk config - output impedance of pad */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x150);
+ /* data2 io config - output impedance of pa */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x1F0);
+ /* data2 io clk config - output impedance of pad */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x1F4);
+ /* data3 io config - output impedance of pa */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x294);
+ /* data3 io clk config - output impedance of pad */
+ writel(0x4, DDRPHY_CONFIG_BASE + 0x298);
+
+ if (get_cpu_rev() == 0) {
+ /* fifo_we_out0 - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x338);
+ /* fifo_we_out1 - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x340);
+ /* fifo_we_in2 - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x348);
+ /* fifo_we_in3 - output impedance of pad */
+ writel(0x5, DDRPHY_CONFIG_BASE + 0x350);
+ }
+}
+
+static void emif4p_init(u32 TIM1, u32 TIM2, u32 TIM3, u32 SDREF, u32 SDCFG,
+ u32 RL)
+{
+ if (USE_EMIF0) {
+ /* Program EMIF0 CFG Registers */
+ writel(TIM1, EMIF4_0_SDRAM_TIM_1);
+ writel(TIM1, EMIF4_0_SDRAM_TIM_1_SHADOW);
+ writel(TIM2, EMIF4_0_SDRAM_TIM_2);
+ writel(TIM2, EMIF4_0_SDRAM_TIM_2_SHADOW);
+ writel(TIM3, EMIF4_0_SDRAM_TIM_3);
+ writel(TIM3, EMIF4_0_SDRAM_TIM_3_SHADOW);
+ writel(SDCFG, EMIF4_0_SDRAM_CONFIG);
+ writel(RL, EMIF4_0_DDR_PHY_CTRL_1);
+ writel(RL, EMIF4_0_DDR_PHY_CTRL_1_SHADOW);
+ /* initially a large refresh period */
+ writel(0x0000613B, EMIF4_0_SDRAM_REF_CTRL);
+ /* trigger initialization */
+ writel(0x1000613B, EMIF4_0_SDRAM_REF_CTRL);
+ writel((0x10000000|EMIF_SDREF), EMIF4_0_SDRAM_REF_CTRL);
+ }
+
+ if (USE_EMIF1) {
+ /* Program EMIF1 CFG Registers */
+ writel(TIM1, EMIF4_1_SDRAM_TIM_1);
+ writel(TIM1, EMIF4_1_SDRAM_TIM_1_SHADOW);
+ writel(TIM2, EMIF4_1_SDRAM_TIM_2);
+ writel(TIM2, EMIF4_1_SDRAM_TIM_2_SHADOW);
+ writel(TIM3, EMIF4_1_SDRAM_TIM_3);
+ writel(TIM3, EMIF4_1_SDRAM_TIM_3_SHADOW);
+ writel(SDCFG, EMIF4_1_SDRAM_CONFIG);
+ writel(RL, EMIF4_1_DDR_PHY_CTRL_1);
+ writel(RL, EMIF4_1_DDR_PHY_CTRL_1_SHADOW);
+ /* initially a large refresh period */
+ writel(0x0000613B, EMIF4_1_SDRAM_REF_CTRL);
+ /* trigger initialization */
+ writel(0x1000613B, EMIF4_1_SDRAM_REF_CTRL);
+ writel((0x10000000|EMIF_SDREF), EMIF4_1_SDRAM_REF_CTRL);
+ }
+
+ delay(1000);
+#ifdef CONFIG_TI816X_DDR3_SW_LEVELING
+ ddr3_sw_levelling(0);
+ ddr3_sw_levelling(1);
+#endif
+}
+
+/* needed by config_dmm() */
+void enable_dmm_clocks(void) {};
+
+static void config_ti816x_sdram_ddr(void)
+{
+ /* Enable the EMIF Firewall clocks */
+ writel(0x2, CM_DEFAULT_FW_CLKCTRL);
+ /* Enable the Power Domain Transition of L3 Fast Domain Peripheral */
+ writel(0x2, CM_DEFAULT_L3_FAST_CLKSTCTRL);
+ /* Enable EMIF0 Clock */
+ writel(0x2, CM_DEFAULT_EMIF_0_CLKCTRL);
+ /* Enable EMIF1 Clock */
+ writel(0x2, CM_DEFAULT_EMIF_1_CLKCTRL);
+ /* Poll for L3_FAST_GCLK & DDR_GCLK are active */
+ while ((readl(CM_DEFAULT_L3_FAST_CLKSTCTRL) & 0x300) != 0x300)
+ ;
+ /* Poll for Module is functional */
+ while ((readl(CM_DEFAULT_EMIF_0_CLKCTRL)) != 0x2)
+ ;
+ /* Poll for Module is functional */
+ while ((readl(CM_DEFAULT_EMIF_1_CLKCTRL)) != 0x2)
+ ;
+
+ if (USE_EMIF0)
+ ddr_init_settings(0);
+
+ if (USE_EMIF1)
+ ddr_init_settings(1);
+
+ /* Enable EMIF1 Clock */
+ writel(0x2, CM_DEFAULT_DMM_CLKCTRL);
+ /* Poll for Module is functional */
+ while ((readl(CM_DEFAULT_DMM_CLKCTRL)) != 0x2)
+ ;
+
+ /* Program the DMM to for interleaved configuration */
+ config_dmm(&evm_lisa_map_regs);
+
+ /* Enable Tiled Access */
+ writel(0x80000000, DMM_PAT_BASE_ADDR);
+
+ emif4p_init(EMIF_TIM1, EMIF_TIM2, EMIF_TIM3, EMIF_SDREF & 0xFFFFFFF,
+ EMIF_SDCFG, EMIF_PHYCFG);
+}
+
+#ifdef CONFIG_TI816X_DDR3_SW_LEVELING
+static void ddr3_sw_levelling(int emif)
+{
+ writel(0x6, (DDRPHY_CONFIG_BASE + 0x358));
+
+ writel(DQS_GATE_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x108));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x10C));
+ writel(DQS_GATE_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1AC));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x1B0));
+ writel(DQS_GATE_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x250));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x254));
+ writel(DQS_GATE_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2F4));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x2F8));
+
+ writel(WR_DQS_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x0DC));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x0E0));
+ writel(WR_DQS_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x180));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x184));
+ writel(WR_DQS_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x224));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x228));
+ writel(WR_DQS_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2C8));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x2CC));
+
+ writel(WR_DATA_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x120));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x124));
+ writel(WR_DATA_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1C4));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x1C8));
+ writel(WR_DATA_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x268));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x26C));
+ writel(WR_DATA_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x30C));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x310));
+
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x0C8));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x0CC));
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x16C));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x170));
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x210));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x214));
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x2B4));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x2B8));
+}
+#endif /* CONFIG_TI816X_DDR3_SW_LEVELING */
+
+#endif /* CONFIG_TI816X_EVM_DDR3 */
+
+#ifdef CONFIG_TI816X_EVM_DDR2
+static void ddr_init_settings(int emif)
+{
+ /* DLL Lockdiff */
+ if (get_cpu_rev() == 0) {
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x028));
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x05C));
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x090));
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x138));
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x1DC));
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x280));
+ writel(0xF, (DDRPHY_CONFIG_BASE + 0x324));
+ }
+
+ if (get_cpu_rev() == 1)
+ writel(0x6, (DDRPHY_CONFIG_BASE + 0x358));
+
+ /* setup rank delays */
+ writel(0x1, (DDRPHY_CONFIG_BASE + 0x134));
+ writel(0x1, (DDRPHY_CONFIG_BASE + 0x1D8));
+ writel(0x1, (DDRPHY_CONFIG_BASE + 0x27C));
+ writel(0x1, (DDRPHY_CONFIG_BASE + 0x320));
+
+ /* invert_clk_out cmd0 */
+ writel(INVERT_CLK_OUT, (DDRPHY_CONFIG_BASE + 0x02C));
+ writel(INVERT_CLK_OUT, (DDRPHY_CONFIG_BASE + 0x060));
+ writel(INVERT_CLK_OUT, (DDRPHY_CONFIG_BASE + 0x094));
+
+ /* cmd0 slave ratio */
+ writel(CMD_SLAVE_RATIO, (DDRPHY_CONFIG_BASE + 0x01C));
+ writel(CMD_SLAVE_RATIO, (DDRPHY_CONFIG_BASE + 0x050));
+ writel(CMD_SLAVE_RATIO, (DDRPHY_CONFIG_BASE + 0x084));
+
+ writel(DQS_GATE_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x108));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x10C));
+ writel(DQS_GATE_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1AC));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x1B0));
+ writel(DQS_GATE_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x250));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x254));
+ writel(DQS_GATE_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2F4));
+ writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x2F8));
+
+ writel(WR_DQS_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x0DC));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x0E0));
+ writel(WR_DQS_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x180));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x184));
+ writel(WR_DQS_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x224));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x228));
+ writel(WR_DQS_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2C8));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x2CC));
+
+ writel(WR_DATA_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x120));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x124));
+ writel(WR_DATA_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1C4));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x1C8));
+ writel(WR_DATA_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x268));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x26C));
+ writel(WR_DATA_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x30C));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x310));
+
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x0C8));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x0CC));
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x16C));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x170));
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x210));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x214));
+ writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x2B4));
+ writel(0x0, (DDRPHY_CONFIG_BASE + 0x2B8));
+
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x00C));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x010));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x040));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x044));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x074));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x078));
+
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x0A8));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x0AC));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x14C));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x150));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x1F0));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x1F4));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x294));
+ writel(0x4, (DDRPHY_CONFIG_BASE + 0x298));
+
+ if (get_cpu_rev() == 0) {
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x338));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x340));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x348));
+ writel(0x5, (DDRPHY_CONFIG_BASE + 0x350));
+ }
+
+}
+
+static void emif4p_init(u32 TIM1, u32 TIM2, u32 TIM3, u32 SDREF, u32 SDCFG,
+ u32 RL)
+{
+ /* Program EMIF0 CFG Registers */
+ writel(TIM1, EMIF4_0_SDRAM_TIM_1);
+ writel(TIM1, EMIF4_0_SDRAM_TIM_1_SHADOW);
+ writel(TIM2, EMIF4_0_SDRAM_TIM_2);
+ writel(TIM2, EMIF4_0_SDRAM_TIM_2_SHADOW);
+ writel(TIM3, EMIF4_0_SDRAM_TIM_3);
+ writel(TIM3, EMIF4_0_SDRAM_TIM_3_SHADOW);
+ writel(SDCFG, EMIF4_0_SDRAM_CONFIG);
+ writel(RL, EMIF4_0_DDR_PHY_CTRL_1);
+ writel(RL, EMIF4_0_DDR_PHY_CTRL_1_SHADOW);
+
+ if (CONFIG_TI816X_TWO_EMIF) {
+ writel(TIM1, EMIF4_1_SDRAM_TIM_1);
+ writel(TIM1, EMIF4_1_SDRAM_TIM_1_SHADOW);
+ writel(TIM2, EMIF4_1_SDRAM_TIM_2);
+ writel(TIM2, EMIF4_1_SDRAM_TIM_2_SHADOW);
+ writel(TIM3, EMIF4_1_SDRAM_TIM_3);
+ writel(TIM3, EMIF4_1_SDRAM_TIM_3_SHADOW);
+ writel(SDCFG, EMIF4_1_SDRAM_CONFIG);
+ writel(RL, EMIF4_1_DDR_PHY_CTRL_1);
+ writel(RL, EMIF4_1_DDR_PHY_CTRL_1_SHADOW);
+ }
+
+ /* setup a small control period */
+ writel(0x0000613B, EMIF4_0_SDRAM_REF_CTRL);
+ writel(0x1000613B, EMIF4_0_SDRAM_REF_CTRL);
+ writel((0x10000000|SDREF), EMIF4_0_SDRAM_REF_CTRL);
+
+ if (CONFIG_TI816X_TWO_EMIF) {
+ /* setup a small control period */
+ writel(0x0000613B, EMIF4_1_SDRAM_REF_CTRL);
+ writel(0x1000613B, EMIF4_1_SDRAM_REF_CTRL);
+ writel((0x10000000|SDREF), EMIF4_1_SDRAM_REF_CTRL);
+
+ }
+
+
+}
+
+/* needed by config_dmm() */
+void enable_dmm_clocks(void) {};
+
+static void config_ti816x_sdram_ddr(void)
+{
+ /* Enable the Power Domain Transition of L3 Fast Domain Peripheral */
+ writel(0x2, CM_DEFAULT_L3_FAST_CLKSTCTRL);
+ /* Enable EMIF0 Clock */
+ writel(0x2, CM_DEFAULT_EMIF_0_CLKCTRL);
+ /* Enable EMIF1 Clock */
+ writel(0x2, CM_DEFAULT_EMIF_1_CLKCTRL);
+ /* Poll for L3_FAST_GCLK & DDR_GCLK are active */
+ while ((readl(CM_DEFAULT_L3_FAST_CLKSTCTRL) & 0x300) != 0x300)
+ ;
+ /* Poll for Module is functional */
+ while ((readl(CM_DEFAULT_EMIF_0_CLKCTRL)) != 0x2)
+ ;
+ /* Poll for Module is functional */
+ while ((readl(CM_DEFAULT_EMIF_1_CLKCTRL)) != 0x2)
+ ;
+
+ ddr_init_settings(0);
+
+ if (CONFIG_TI816X_TWO_EMIF)
+ ddr_init_settings(1);
+
+ /* Enable EMIF1 Clock */
+ writel(0x2, CM_DEFAULT_DMM_CLKCTRL);
+ /* Poll for Module is functional */
+ while ((readl(CM_DEFAULT_DMM_CLKCTRL)) != 0x2)
+ ;
+
+ /* Program the DMM for interleave setting */
+ config_dmm(&evm_lisa_map_regs);
+
+ /* Enable Tiled Access */
+ writel(0x80000000, DMM_PAT_BASE_ADDR);
+
+ emif4p_init(EMIF_TIM1, EMIF_TIM2, EMIF_TIM3, EMIF_SDREF & 0xFFFFFFF,
+ EMIF_SDCFG, EMIF_PHYCFG);
+
+}
+#endif
+
+/*
+ * TI816X specific functions
+ */
+static void main_pll_init_ti816x(u32 sil_index, u32 clk_index)
+{
+ u32 main_pll_ctrl = 0;
+
+ /*
+ * Sequence to be followed:
+ * 1. Put the PLL in bypass mode by setting BIT2 in its ctrl reg
+ * 2. Write the values of N,P in the CTRL reg
+ * 3. Program the freq values, divider values for the required output
+ * in the Control module reg
+ * 4. Note: Loading the freq value requires a particular bit to be set
+ * in the freq reg.
+ * 4. Program the CM divider value in the CM module reg
+ * 5. Enable the PLL by setting the appropriate bit in the CTRL reg of
+ * the PLL
+ */
+
+ /* If the registers have been set by the ROM code dont do anything */
+
+ main_pll_ctrl = readl(MAINPLL_CTRL);
+ main_pll_ctrl &= 0xFFFFFFFB;
+ main_pll_ctrl |= 4;
+ writel(main_pll_ctrl, MAINPLL_CTRL);
+
+ main_pll_ctrl = readl(MAINPLL_CTRL);
+ main_pll_ctrl &= 0xFFFFFFF7;
+ main_pll_ctrl |= 8;
+ writel(main_pll_ctrl, MAINPLL_CTRL);
+
+ main_pll_ctrl = readl(MAINPLL_CTRL);
+ main_pll_ctrl &= 0xFF;
+ main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8);
+ writel(main_pll_ctrl, MAINPLL_CTRL);
+
+ writel(0x0, MAINPLL_PWD);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1),
+ MAINPLL_FREQ1);
+ writel(((1<<8) | MAIN_MDIV1), MAINPLL_DIV1);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2),
+ MAINPLL_FREQ2);
+ writel(((1<<8) | MAIN_MDIV2), MAINPLL_DIV2);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3),
+ MAINPLL_FREQ3);
+ writel(((1<<8) | MAIN_MDIV3), MAINPLL_DIV3);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4),
+ MAINPLL_FREQ4);
+ writel(((1<<8) | MAIN_MDIV4), MAINPLL_DIV4);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5),
+ MAINPLL_FREQ5);
+ writel(((1<<8) | MAIN_MDIV5), MAINPLL_DIV5);
+
+ writel((1<<8 | MAIN_MDIV6), MAINPLL_DIV6);
+
+ writel((1<<8 | MAIN_MDIV7), MAINPLL_DIV7);
+
+ while ((readl(MAINPLL_CTRL) & 0x80) != 0x80)
+ ;
+
+ main_pll_ctrl = readl(MAINPLL_CTRL);
+ main_pll_ctrl &= 0xFFFFFFFB;
+
+ writel(main_pll_ctrl, MAINPLL_CTRL);
+
+}
+
+static void ddr_pll_init_ti816x(u32 sil_index, u32 clk_index)
+{
+ u32 ddr_pll_ctrl = 0;
+
+ /*
+ * Sequence to be followed:
+ * 1. Put the PLL in bypass mode by setting BIT2 in its ctrl reg
+ * 2. Write the values of N,P in the CTRL reg
+ * 3. Program the freq values, divider values for the required output
+ * in the Control module reg
+ * 4. Note: Loading the freq value requires a particular bit to be set
+ * in the freq reg.
+ * 5. Program the CM divider value in the CM module reg
+ * 6. Enable the PLL by setting the appropriate bit in the CTRL reg of
+ * the PLL
+ */
+
+ /* If the registers have been set by the ROM code dont do anything */
+
+ ddr_pll_ctrl = readl(DDRPLL_CTRL);
+ ddr_pll_ctrl &= 0xFFFFFFFB;
+ writel(ddr_pll_ctrl, DDRPLL_CTRL);
+
+ ddr_pll_ctrl = readl(DDRPLL_CTRL);
+ ddr_pll_ctrl &= 0xFFFFFFF7;
+ ddr_pll_ctrl |= 8;
+ writel(ddr_pll_ctrl, DDRPLL_CTRL);
+
+ ddr_pll_ctrl = readl(DDRPLL_CTRL);
+ ddr_pll_ctrl &= 0xFF;
+ ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8);
+ writel(ddr_pll_ctrl, DDRPLL_CTRL);
+
+ /* 10usec delay */
+ ddr_delay(10);
+
+ writel(0x0, DDRPLL_PWD);
+
+ writel(((0<<8) | DDR_MDIV1), DDRPLL_DIV1);
+ ddr_delay(1);
+ writel(((1<<8) | DDR_MDIV1), DDRPLL_DIV1);
+
+ writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2),
+ DDRPLL_FREQ2);
+ writel(((1<<8) | DDR_MDIV2), DDRPLL_DIV2);
+
+ writel(((0<<8) | DDR_MDIV3), DDRPLL_DIV3);
+ ddr_delay(1);
+ writel(((1<<8) | DDR_MDIV3), DDRPLL_DIV3);
+ ddr_delay(1);
+ writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+ DDRPLL_FREQ3);
+ ddr_delay(1);
+ writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+ DDRPLL_FREQ3);
+
+ ddr_delay(5);
+
+ /* Wait for PLL to lock */
+ while ((readl(DDRPLL_CTRL) & 0x80) != 0x80)
+ ;
+
+ ddr_pll_ctrl = readl(DDRPLL_CTRL);
+ ddr_pll_ctrl &= 0xFFFFFFFB;
+ ddr_pll_ctrl |= 4;
+ writel(ddr_pll_ctrl, DDRPLL_CTRL);
+
+ writel(0x1, DDR_RCD);
+
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (TIMER1, UART0,...)
+ *
+ ******************************************************************/
+static void peripheral_enable(void)
+{
+ /* DMTimers */
+ writel(0x2, CM_ALWON_L3_SLOW_CLKSTCTRL);
+
+ /*
+ * Note on Timers:
+ * There are 8 timers(0-7) out of which timer 0 is a secure timer.
+ * Timer 0 mux should not be changed
+ * For other timers, there are 3 inputs TCLKIN, 32KHz (external clk
+ * or SYSCLK18?) and CLKIN(27MHz)
+ * We select CLKIN and use that
+ */
+
+ /*
+ * First we need to enable the modules and setup the clk path
+ * Then the timers need to be configured by writing to their registers
+ * To access the timer registers we need the module to be
+ * enabled which is what we do in the first step
+ */
+
+ /* TIMER 1 */
+ writel(0x2, CM_ALWON_TIMER_1_CLKCTRL);
+
+ /* Selects CLKIN (27MHz) */
+ writel(0x2, CM_TIMER1_CLKSEL);
+
+ while (((readl(CM_ALWON_L3_SLOW_CLKSTCTRL)
+ & (0x80000<<1)) >> (19+1)) != 1)
+ ;
+
+ while (((readl(CM_ALWON_TIMER_1_CLKCTRL) & 0x30000)>>16) != 0)
+ ;
+
+
+ writel(0x2, (DM_TIMER1_BASE + 0x54));
+ while (readl(DM_TIMER1_BASE + 0x10) & 1)
+ ;
+
+ writel(0x1, (DM_TIMER1_BASE + 0x38));
+
+ /* UARTs */
+ /* Note: The clock has been set to correct rate before this step */
+ writel(0x2, CM_ALWON_UART_0_CLKCTRL);
+ while (readl(CM_ALWON_UART_0_CLKCTRL) != 0x2)
+ ;
+
+ writel(0x2, CM_ALWON_UART_1_CLKCTRL);
+ while (readl(CM_ALWON_UART_1_CLKCTRL) != 0x2)
+ ;
+
+ writel(0x2, CM_ALWON_UART_2_CLKCTRL);
+ while (readl(CM_ALWON_UART_2_CLKCTRL) != 0x2)
+ ;
+
+ while ((readl(CM_ALWON_L3_SLOW_CLKSTCTRL) & 0x2100) != 0x2100)
+ ;
+
+ /* eFuse */
+ writel(0x2, CM_ALWON_CUST_EFUSE_CLKCTRL);
+ while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != 0x2)
+ ;
+
+ /* GPIO0 */
+ writel(0x2, CM_ALWON_GPIO_0_CLKCTRL);
+ while (readl(CM_ALWON_GPIO_0_CLKCTRL) != 0x2)
+ ;
+
+ writel((BIT(8)), CM_ALWON_GPIO_0_OPTFCLKEN_DBCLK);
+
+ /* SPI */
+ writel(0x2, CM_ALWON_SPI_CLKCTRL);
+ while (readl(CM_ALWON_SPI_CLKCTRL) != 0x2)
+ ;
+
+ /* I2C0 */
+ writel(0x2, CM_ALWON_I2C_0_CLKCTRL);
+ while (readl(CM_ALWON_I2C_0_CLKCTRL) != 0x2)
+ ;
+
+ /* Ethernet */
+ writel(0x2, CM_ETHERNET_CLKSTCTRL);
+ writel(0x2, CM_ALWON_ETHERNET_0_CLKCTRL);
+ writel(0x2, CM_ALWON_ETHERNET_1_CLKCTRL);
+
+ /* HSMMC */
+ writel(0x2, CM_ALWON_HSMMC_CLKCTRL);
+ while (readl(CM_ALWON_HSMMC_CLKCTRL) != 0x2)
+ ;
+
+ /* WDT */
+ /*
+ * For WDT to be functional, it needs to be first stopped by writing
+ * the pattern 0xAAAA followed by 0x5555 in the WDT start/stop register.
+ * After that a write-once register in Control module needs to
+ * be configured
+ * to unfreeze the timer.
+ * Note: It is important to stop the watchdog before unfreezing it
+ */
+ writel(0xAAAA, WDT_WSPR);
+ while (readl(WDT_WWPS) != 0x0)
+ ;
+ writel(0x5555, WDT_WSPR);
+ while (readl(WDT_WWPS) != 0x0)
+ ;
+
+ /* Unfreeze WDT */
+ writel(0x2, WDT_UNFREEZE);
+}
+
+/******************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ *****************************************************************************/
+void prcm_init(void)
+{
+ /* For future */
+ u32 clk_index = 0, sil_index = 0;
+
+ writel(0x2, 0x48200010);
+ /* Enable the control module */
+ writel(0x2, CM_ALWON_CONTROL_CLKCTRL);
+
+ /* Fix ROM code bug */
+ writel(0x0, 0x48180324);
+
+ main_pll_init_ti816x(clk_index, sil_index);
+ ddr_pll_init_ti816x(clk_index, sil_index);
+
+ /*
+ * With clk freqs setup to desired values,
+ * enable the required peripherals
+ */
+ peripheral_enable();
+}
+#endif /* CONFIG_SPL_BUILD */
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called at time when only stack is available.
+ **********************************************************/
+void s_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ /* Setup the PLLs and the clocks for the peripherals */
+ prcm_init();
+ configure_module_pin_mux(mmc_pin_mux);
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ config_ti816x_sdram_ddr(); /* Do DDR settings */
+#endif
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0);
+ return 0;
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index c98495a..aab56b9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -239,6 +239,7 @@ am335x_evm_uart3 arm armv7 am335x ti
am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
ti814x_evm arm armv7 ti814x ti am33xx
+ti816x_evm arm armv7 ti816x ti am33xx
pcm051 arm armv7 pcm051 phytec am33xx pcm051
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
new file mode 100644
index 0000000..b5b5172
--- /dev/null
+++ b/include/configs/ti816x_evm.h
@@ -0,0 +1,177 @@
+/*
+ * ti816x_evm.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart at adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __CONFIG_TI816X_EVM_H
+#define __CONFIG_TI816X_EVM_H
+
+#define CONFIG_TI81XX
+#define CONFIG_TI816X
+#define CONFIG_SYS_NO_FLASH
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024))
+#define CONFIG_SYS_LONGHELP /* undef save memory */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "u-boot/ti816x# "
+#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG /* required for ramdisk support */
+
+#include <config_cmd_default.h> /* u-boot default commands */
+
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_BOOTDELAY 3 /* set negative for no autoboot */
+#define CONFIG_EXTRA_EMV_SETTINGS \
+ "verify=yes\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc rescan 0;" \
+ "fatload mmc 0 0x81000000 uImage;" \
+ "bootm 0x81000000"
+
+#define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk"
+
+/* Clock Defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */
+
+/*
+ * Memtest works on 8 MB in DRAM after skipping 32MB
+ * from start addr of ram disk
+ */
+#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64*1024*1024))
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ + (8*1024*1024))
+
+#undef CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
+
+#define CONFIG_CMD_ASKEN
+#define CONFIG_CMD_ECHO
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_FS_FAT
+
+/* Only one of the following two options (DDR3/DDR2) should be enabled */
+/*
+#define CONFIG_TI816X_EVM_DDR2
+#define CONFIG_TI816X_TWO_EMIF 1
+*/
+#define CONFIG_TI816X_EVM_DDR3
+
+
+#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
+#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
+#define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */
+#define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */
+#define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */
+
+#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
+ GENERATED_GBL_DATA_SIZE)
+
+/**
+ * Platform/Board specific defs
+ */
+#define CONFIG_SYS_CLK_FREQ 27000000
+#define CONFIG_SYS_TIMERBASE 0x4802E000
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+
+#undef CONFIG_NAND_OMAP_GPMC
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK (48000000)
+#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
+
+#define CONFIG_BAUDRATE 115200
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SERIAL1
+#define CONFIG_SERIAL2
+#define CONFIG_SERIAL3
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x40300000
+#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
+/* Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#endif
--
1.7.10.4
More information about the U-Boot
mailing list