[U-Boot] [PATCH 0/8] zmx25: Add hardware support

[Thomas Diener]

Hi folks,
do you have any comments or statements for this patches?
Thanks and best regards,
Thomas

Am 15.05.2014 um 16:34 schrieb dietho at gmx.de:
> From: Thomas Diener <dietho at gmx.de>
>
> This patchset is the result of the "[PATCH 3/4] zmx25: Add
> extended support for the cpu and base boards"
> (http://patchwork.ozlabs.org/patch/341717/). I split the
> patch up as Stefano Babic recommended.
>
> Thomas Diener (8):
>    imx25: Add new hardware registers
>    drivers: Add polytouch touch sensor controller
>    mxc_i2c: Use the 3th i2c channel for imx25
>    input: Add support for FMA1125 touch controller
>    input: Add support for MPR121 touch controller
>    zmx25: Extended support for cpu and base boards
>    imx25: Add new registers defines
>    video: imx25lcdc: add board_video_init() call
>
>   arch/arm/include/asm/arch-mx25/imx-regs.h   |  271 ++++++-
>   arch/arm/include/asm/arch-mx25/iomux-mx25.h |   25 +-
>   arch/arm/include/asm/imx-common/iomux-v3.h  |   13 +-
>   arch/arm/lib/asm-offsets.c                  |    9 +
>   board/syteco/zmx25/lowlevel_init.S          |   21 +
>   board/syteco/zmx25/zmx25.c                  | 1052 +++++++++++++++++++++++++--
>   drivers/i2c/mxc_i2c.c                       |    2 +-
>   drivers/input/Makefile                      |    3 +
>   drivers/input/fma1125.c                     |   47 ++
>   drivers/input/mpr121.c                      |   67 ++
>   drivers/input/polytouch.c                   |  138 ++++
>   drivers/video/imx25lcdc.c                   |   19 +
>   include/configs/zmx25.h                     |   66 +-
>   include/fma1125.h                           |  140 ++++
>   include/mpr121.h                            |  158 ++++
>   include/polytouch.h                         |   35 +
>   16 files changed, 1976 insertions(+), 90 deletions(-)
>   create mode 100644 drivers/input/fma1125.c
>   create mode 100644 drivers/input/mpr121.c
>   create mode 100644 drivers/input/polytouch.c
>   create mode 100644 include/fma1125.h
>   create mode 100644 include/mpr121.h
>   create mode 100644 include/polytouch.h
>