[U-Boot] [PATCH 10/18] arm: mx6: ddr: configure MMDC for slow_pd

[Nikita Kiryanov]

On 04/08/14 08:42, Tim Harvey wrote:
> On Sun, Aug 3, 2014 at 12:34 AM, Nikita Kiryanov <nikita at compulab.co.il> wrote:
>> According to MX6 TRM, both MMDC and DRAM should be configured to
>> the same powerdown precharge. Currently, mx6_dram_cfg()
>> configures MMDC for fast pd, and the DRAM for slow pd.
>
> Nikita,
>
> I'm inclined to agree with you. A glance at some of the existing
> non-spl board config's show this same discrepancy which probably comes
> form an error in the IMX DDR3 Script Aid spreadsheet
> (https://community.freescale.com/docs/DOC-94917).
>
> I would at least add to the description the fact that the precharge pd
> is MR0 bit12 for DRAM and the current value of 0 indicates 'Slow exit
> (DLL off)'. I've asked our Freescale FAE for clarification to see if
> the spreadsheet is in error.

OK, I'll add it once the FAE confirms the error.

>
> Regards,
>
> Tim
>