[U-Boot] [PATCH v2 24/25] tools: kwbimage: Add image version 1 support for Armada XP / 370
Stefan Roese
sr at denx.de
Tue Aug 5 09:10:10 CEST 2014
This patch integrates the Barebox version of this kwbimage.c file into
U-Boot. As this version supports the image version 1 type for the
Armada XP / 370 SoCs.
It was easier to integrate the existing and known to be working Barebox
source than to update the current U-Boot version to support this
v1 image header format. Now all Marvell MVEBU SoCs are supported:
Image type 0: Kirkwood & Dove
Image type 1: Armada 370 & Armada XP
Please note that the current v1 support has this restuction (same as
has Barebox version):
Not implemented: support for the register headers and secure headers
in v1 images
Tested on Marvell DB-78460-BP eval board.
Signed-off-by: Stefan Roese <sr at denx.de>
Tested-by: Luka Perkov <luka at openwrt.org>
---
Changes in v2: None
tools/kwbimage.c | 1050 ++++++++++++++++++++++++++++++++++++++++--------------
1 file changed, 782 insertions(+), 268 deletions(-)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 109d616..1120e9b 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -1,364 +1,805 @@
/*
- * (C) Copyright 2008
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ * Image manipulator for Marvell SoCs
+ * supports Kirkwood, Dove, Armada 370, and Armada XP
+ *
+ * (C) Copyright 2013 Thomas Petazzoni
+ * <thomas.petazzoni at free-electrons.com>
*
* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Not implemented: support for the register headers and secure
+ * headers in v1 images
*/
#include "imagetool.h"
#include <image.h>
+#include <stdint.h>
#include "kwbimage.h"
-/*
- * Supported commands for configuration file
- */
-static table_entry_t kwbimage_cmds[] = {
- {CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
- {CMD_NAND_ECC_MODE, "NAND_ECC_MODE", "NAND mode", },
- {CMD_NAND_PAGE_SIZE, "NAND_PAGE_SIZE", "NAND size", },
- {CMD_SATA_PIO_MODE, "SATA_PIO_MODE", "SATA mode", },
- {CMD_DDR_INIT_DELAY, "DDR_INIT_DELAY", "DDR init dly", },
- {CMD_DATA, "DATA", "Reg Write Data", },
- {CMD_INVALID, "", "", },
+#define ALIGN_SUP(x, a) (((x) + (a - 1)) & ~(a - 1))
+
+/* Structure of the main header, version 0 (Kirkwood, Dove) */
+struct main_hdr_v0 {
+ uint8_t blockid; /*0 */
+ uint8_t nandeccmode; /*1 */
+ uint16_t nandpagesize; /*2-3 */
+ uint32_t blocksize; /*4-7 */
+ uint32_t rsvd1; /*8-11 */
+ uint32_t srcaddr; /*12-15 */
+ uint32_t destaddr; /*16-19 */
+ uint32_t execaddr; /*20-23 */
+ uint8_t satapiomode; /*24 */
+ uint8_t rsvd3; /*25 */
+ uint16_t ddrinitdelay; /*26-27 */
+ uint16_t rsvd2; /*28-29 */
+ uint8_t ext; /*30 */
+ uint8_t checksum; /*31 */
+};
+
+struct ext_hdr_v0_reg {
+ uint32_t raddr;
+ uint32_t rdata;
+};
+
+#define EXT_HDR_V0_REG_COUNT ((0x1dc - 0x20) / sizeof(struct ext_hdr_v0_reg))
+
+struct ext_hdr_v0 {
+ uint32_t offset;
+ uint8_t reserved[0x20 - sizeof(uint32_t)];
+ struct ext_hdr_v0_reg rcfg[EXT_HDR_V0_REG_COUNT];
+ uint8_t reserved2[7];
+ uint8_t checksum;
+};
+
+/* Structure of the main header, version 1 (Armada 370, Armada XP) */
+struct main_hdr_v1 {
+ uint8_t blockid; /* 0 */
+ uint8_t reserved1; /* 1 */
+ uint16_t reserved2; /* 2-3 */
+ uint32_t blocksize; /* 4-7 */
+ uint8_t version; /* 8 */
+ uint8_t headersz_msb; /* 9 */
+ uint16_t headersz_lsb; /* A-B */
+ uint32_t srcaddr; /* C-F */
+ uint32_t destaddr; /* 10-13 */
+ uint32_t execaddr; /* 14-17 */
+ uint8_t reserved3; /* 18 */
+ uint8_t nandblocksize; /* 19 */
+ uint8_t nandbadblklocation; /* 1A */
+ uint8_t reserved4; /* 1B */
+ uint16_t reserved5; /* 1C-1D */
+ uint8_t ext; /* 1E */
+ uint8_t checksum; /* 1F */
};
/*
- * Supported Boot options for configuration file
+ * Header for the optional headers, version 1 (Armada 370, Armada XP)
*/
-static table_entry_t kwbimage_bootops[] = {
- {IBR_HDR_SPI_ID, "spi", "SPI Flash", },
- {IBR_HDR_NAND_ID, "nand", "NAND Flash", },
- {IBR_HDR_SATA_ID, "sata", "Sata port", },
- {IBR_HDR_PEX_ID, "pex", "PCIe port", },
- {IBR_HDR_UART_ID, "uart", "Serial port", },
- {-1, "", "Invalid", },
+struct opt_hdr_v1 {
+ uint8_t headertype;
+ uint8_t headersz_msb;
+ uint16_t headersz_lsb;
+ char data[0];
};
/*
- * Supported NAND ecc options configuration file
+ * Various values for the opt_hdr_v1->headertype field, describing the
+ * different types of optional headers. The "secure" header contains
+ * informations related to secure boot (encryption keys, etc.). The
+ * "binary" header contains ARM binary code to be executed prior to
+ * executing the main payload (usually the bootloader). This is
+ * typically used to execute DDR3 training code. The "register" header
+ * allows to describe a set of (address, value) tuples that are
+ * generally used to configure the DRAM controller.
*/
-static table_entry_t kwbimage_eccmodes[] = {
- {IBR_HDR_ECC_DEFAULT, "default", "Default mode", },
- {IBR_HDR_ECC_FORCED_HAMMING, "hamming", "Hamming mode", },
- {IBR_HDR_ECC_FORCED_RS, "rs", "RS mode", },
- {IBR_HDR_ECC_DISABLED, "disabled", "ECC Disabled", },
- {-1, "", "", },
+#define OPT_HDR_V1_SECURE_TYPE 0x1
+#define OPT_HDR_V1_BINARY_TYPE 0x2
+#define OPT_HDR_V1_REGISTER_TYPE 0x3
+
+#define KWBHEADER_V1_SIZE(hdr) \
+ (((hdr)->headersz_msb << 16) | (hdr)->headersz_lsb)
+
+static struct image_cfg_element *image_cfg;
+static int cfgn;
+
+struct boot_mode {
+ unsigned int id;
+ const char *name;
+};
+
+struct boot_mode boot_modes[] = {
+ { 0x4D, "i2c" },
+ { 0x5A, "spi" },
+ { 0x8B, "nand" },
+ { 0x78, "sata" },
+ { 0x9C, "pex" },
+ { 0x69, "uart" },
+ {},
};
-static struct kwb_header kwbimage_header;
-static int datacmd_cnt = 0;
-static char * fname = "Unknown";
-static int lineno = -1;
+struct nand_ecc_mode {
+ unsigned int id;
+ const char *name;
+};
+
+struct nand_ecc_mode nand_ecc_modes[] = {
+ { 0x00, "default" },
+ { 0x01, "hamming" },
+ { 0x02, "rs" },
+ { 0x03, "disabled" },
+ {},
+};
+
+/* Used to identify an undefined execution or destination address */
+#define ADDR_INVALID ((uint32_t)-1)
+
+#define BINARY_MAX_ARGS 8
+
+/* In-memory representation of a line of the configuration file */
+struct image_cfg_element {
+ enum {
+ IMAGE_CFG_VERSION = 0x1,
+ IMAGE_CFG_BOOT_FROM,
+ IMAGE_CFG_DEST_ADDR,
+ IMAGE_CFG_EXEC_ADDR,
+ IMAGE_CFG_NAND_BLKSZ,
+ IMAGE_CFG_NAND_BADBLK_LOCATION,
+ IMAGE_CFG_NAND_ECC_MODE,
+ IMAGE_CFG_NAND_PAGESZ,
+ IMAGE_CFG_BINARY,
+ IMAGE_CFG_PAYLOAD,
+ IMAGE_CFG_DATA,
+ } type;
+ union {
+ unsigned int version;
+ unsigned int bootfrom;
+ struct {
+ const char *file;
+ unsigned int args[BINARY_MAX_ARGS];
+ unsigned int nargs;
+ } binary;
+ const char *payload;
+ unsigned int dstaddr;
+ unsigned int execaddr;
+ unsigned int nandblksz;
+ unsigned int nandbadblklocation;
+ unsigned int nandeccmode;
+ unsigned int nandpagesz;
+ struct ext_hdr_v0_reg regdata;
+ };
+};
+
+#define IMAGE_CFG_ELEMENT_MAX 256
/*
- * Report Error if xflag is set in addition to default
+ * Byte 8 of the image header contains the version number. In the v0
+ * header, byte 8 was reserved, and always set to 0. In the v1 header,
+ * byte 8 has been changed to a proper field, set to 1.
*/
-static int kwbimage_check_params(struct image_tool_params *params)
+static unsigned int image_version(void *header)
{
- if (!strlen (params->imagename)) {
- printf ("Error:%s - Configuration file not specified, "
- "it is needed for kwbimage generation\n",
- params->cmdname);
- return CFG_INVALID;
- }
- return ((params->dflag && (params->fflag || params->lflag)) ||
- (params->fflag && (params->dflag || params->lflag)) ||
- (params->lflag && (params->dflag || params->fflag)) ||
- (params->xflag) || !(strlen (params->imagename)));
+ unsigned char *ptr = header;
+ return ptr[8];
+}
+
+/*
+ * Utility functions to manipulate boot mode and ecc modes (convert
+ * them back and forth between description strings and the
+ * corresponding numerical identifiers).
+ */
+
+static const char *image_boot_mode_name(unsigned int id)
+{
+ int i;
+ for (i = 0; boot_modes[i].name; i++)
+ if (boot_modes[i].id == id)
+ return boot_modes[i].name;
+ return NULL;
+}
+
+int image_boot_mode_id(const char *boot_mode_name)
+{
+ int i;
+ for (i = 0; boot_modes[i].name; i++)
+ if (!strcmp(boot_modes[i].name, boot_mode_name))
+ return boot_modes[i].id;
+
+ return -1;
+}
+
+int image_nand_ecc_mode_id(const char *nand_ecc_mode_name)
+{
+ int i;
+ for (i = 0; nand_ecc_modes[i].name; i++)
+ if (!strcmp(nand_ecc_modes[i].name, nand_ecc_mode_name))
+ return nand_ecc_modes[i].id;
+ return -1;
}
-static uint32_t check_get_hexval (char *token)
+static struct image_cfg_element *
+image_find_option(unsigned int optiontype)
{
- uint32_t hexval;
+ int i;
- if (!sscanf (token, "%x", &hexval)) {
- printf ("Error:%s[%d] - Invalid hex data(%s)\n", fname,
- lineno, token);
- exit (EXIT_FAILURE);
+ for (i = 0; i < cfgn; i++) {
+ if (image_cfg[i].type == optiontype)
+ return &image_cfg[i];
}
- return hexval;
+
+ return NULL;
+}
+
+static unsigned int
+image_count_options(unsigned int optiontype)
+{
+ int i;
+ unsigned int count = 0;
+
+ for (i = 0; i < cfgn; i++)
+ if (image_cfg[i].type == optiontype)
+ count++;
+
+ return count;
}
/*
- * Generates 8 bit checksum
+ * Compute a 8-bit checksum of a memory area. This algorithm follows
+ * the requirements of the Marvell SoC BootROM specifications.
*/
-static uint8_t kwbimage_checksum8 (void *start, uint32_t len, uint8_t csum)
+static uint8_t image_checksum8(void *start, uint32_t len)
{
- register uint8_t sum = csum;
- volatile uint8_t *p = (volatile uint8_t *)start;
+ uint8_t csum = 0;
+ uint8_t *p = start;
/* check len and return zero checksum if invalid */
if (!len)
return 0;
do {
- sum += *p;
+ csum += *p;
p++;
} while (--len);
- return (sum);
+
+ return csum;
}
-/*
- * Generates 32 bit checksum
- */
-static uint32_t kwbimage_checksum32 (uint32_t *start, uint32_t len, uint32_t csum)
+static uint32_t image_checksum32(void *start, uint32_t len)
{
- register uint32_t sum = csum;
- volatile uint32_t *p = start;
+ uint32_t csum = 0;
+ uint32_t *p = start;
/* check len and return zero checksum if invalid */
if (!len)
return 0;
if (len % sizeof(uint32_t)) {
- printf ("Error:%s[%d] - length is not in multiple of %zu\n",
- __FUNCTION__, len, sizeof(uint32_t));
+ fprintf(stderr, "Length %d is not in multiple of %zu\n",
+ len, sizeof(uint32_t));
return 0;
}
do {
- sum += *p;
+ csum += *p;
p++;
len -= sizeof(uint32_t);
} while (len > 0);
- return (sum);
+
+ return csum;
}
-static void kwbimage_check_cfgdata (char *token, enum kwbimage_cmd cmdsw,
- struct kwb_header *kwbhdr)
+static void *image_create_v0(size_t *imagesz, struct image_tool_params *params,
+ int payloadsz)
{
- bhr_t *mhdr = &kwbhdr->kwb_hdr;
- extbhr_t *exthdr = &kwbhdr->kwb_exthdr;
- int i;
+ struct image_cfg_element *e;
+ size_t headersz;
+ struct main_hdr_v0 *main_hdr;
+ struct ext_hdr_v0 *ext_hdr;
+ void *image;
+ int has_ext = 0;
+
+ /*
+ * Calculate the size of the header and the size of the
+ * payload
+ */
+ headersz = sizeof(struct main_hdr_v0);
+
+ if (image_count_options(IMAGE_CFG_DATA) > 0) {
+ has_ext = 1;
+ headersz += sizeof(struct ext_hdr_v0);
+ }
+
+ if (image_count_options(IMAGE_CFG_PAYLOAD) > 1) {
+ fprintf(stderr, "More than one payload, not possible\n");
+ return NULL;
+ }
- switch (cmdsw) {
- case CMD_BOOT_FROM:
- i = get_table_entry_id (kwbimage_bootops,
- "Kwbimage boot option", token);
-
- if (i < 0)
- goto INVL_DATA;
-
- mhdr->blockid = i;
- printf ("Preparing kirkwood boot image to boot "
- "from %s\n", token);
- break;
- case CMD_NAND_ECC_MODE:
- i = get_table_entry_id (kwbimage_eccmodes,
- "NAND ecc mode", token);
-
- if (i < 0)
- goto INVL_DATA;
-
- mhdr->nandeccmode = i;
- printf ("Nand ECC mode = %s\n", token);
- break;
- case CMD_NAND_PAGE_SIZE:
- mhdr->nandpagesize =
- (uint16_t) check_get_hexval (token);
- printf ("Nand page size = 0x%x\n", mhdr->nandpagesize);
- break;
- case CMD_SATA_PIO_MODE:
- mhdr->satapiomode =
- (uint8_t) check_get_hexval (token);
- printf ("Sata PIO mode = 0x%x\n",
- mhdr->satapiomode);
- break;
- case CMD_DDR_INIT_DELAY:
- mhdr->ddrinitdelay =
- (uint16_t) check_get_hexval (token);
- printf ("DDR init delay = %d msec\n", mhdr->ddrinitdelay);
- break;
- case CMD_DATA:
- exthdr->rcfg[datacmd_cnt].raddr =
- check_get_hexval (token);
-
- break;
- case CMD_INVALID:
- goto INVL_DATA;
- default:
- goto INVL_DATA;
+ image = malloc(headersz);
+ if (!image) {
+ fprintf(stderr, "Cannot allocate memory for image\n");
+ return NULL;
}
- return;
-INVL_DATA:
- printf ("Error:%s[%d] - Invalid data\n", fname, lineno);
- exit (EXIT_FAILURE);
+ memset(image, 0, headersz);
+
+ main_hdr = image;
+
+ /* Fill in the main header */
+ main_hdr->blocksize = payloadsz + sizeof(uint32_t);
+ main_hdr->srcaddr = headersz;
+ main_hdr->ext = has_ext;
+ main_hdr->destaddr = params->addr;
+ main_hdr->execaddr = params->ep;
+
+ e = image_find_option(IMAGE_CFG_BOOT_FROM);
+ if (e)
+ main_hdr->blockid = e->bootfrom;
+ e = image_find_option(IMAGE_CFG_NAND_ECC_MODE);
+ if (e)
+ main_hdr->nandeccmode = e->nandeccmode;
+ e = image_find_option(IMAGE_CFG_NAND_PAGESZ);
+ if (e)
+ main_hdr->nandpagesize = e->nandpagesz;
+ main_hdr->checksum = image_checksum8(image,
+ sizeof(struct main_hdr_v0));
+
+ /* Generate the ext header */
+ if (has_ext) {
+ int cfgi, datai;
+
+ ext_hdr = image + sizeof(struct main_hdr_v0);
+ ext_hdr->offset = 0x40;
+
+ for (cfgi = 0, datai = 0; cfgi < cfgn; cfgi++) {
+ e = &image_cfg[cfgi];
+ if (e->type != IMAGE_CFG_DATA)
+ continue;
+
+ ext_hdr->rcfg[datai].raddr = e->regdata.raddr;
+ ext_hdr->rcfg[datai].rdata = e->regdata.rdata;
+ datai++;
+ }
+
+ ext_hdr->checksum = image_checksum8(ext_hdr,
+ sizeof(struct ext_hdr_v0));
+ }
+
+ *imagesz = headersz;
+ return image;
}
-/*
- * this function sets the kwbimage header by-
- * 1. Abstracting input command line arguments data
- * 2. parses the kwbimage configuration file and update extebded header data
- * 3. calculates header, extended header and image checksums
- */
-static void kwdimage_set_ext_header (struct kwb_header *kwbhdr, char* name) {
- bhr_t *mhdr = &kwbhdr->kwb_hdr;
- extbhr_t *exthdr = &kwbhdr->kwb_exthdr;
- FILE *fd = NULL;
- int j;
- char *line = NULL;
- char * token, *saveptr1, *saveptr2;
- size_t len = 0;
- enum kwbimage_cmd cmd;
-
- fname = name;
- /* set dram register offset */
- exthdr->dramregsoffs = (intptr_t)&exthdr->rcfg - (intptr_t)mhdr;
-
- if ((fd = fopen (name, "r")) == 0) {
- printf ("Error:%s - Can't open\n", fname);
- exit (EXIT_FAILURE);
+static size_t image_headersz_v1(struct image_tool_params *params,
+ int *hasext)
+{
+ struct image_cfg_element *binarye;
+ size_t headersz;
+ int ret;
+
+ /*
+ * Calculate the size of the header and the size of the
+ * payload
+ */
+ headersz = sizeof(struct main_hdr_v1);
+
+ if (image_count_options(IMAGE_CFG_BINARY) > 1) {
+ fprintf(stderr, "More than one binary blob, not supported\n");
+ return 0;
}
- /* Simple kwimage.cfg file parser */
- lineno=0;
- while ((getline (&line, &len, fd)) > 0) {
- lineno++;
- token = strtok_r (line, "\r\n", &saveptr1);
- /* drop all lines with zero tokens (= empty lines) */
- if (token == NULL)
- continue;
+ if (image_count_options(IMAGE_CFG_PAYLOAD) > 1) {
+ fprintf(stderr, "More than one payload, not possible\n");
+ return 0;
+ }
- for (j = 0, cmd = CMD_INVALID, line = token; ; line = NULL) {
- token = strtok_r (line, " \t", &saveptr2);
- if (token == NULL)
- break;
- /* Drop all text starting with '#' as comments */
- if (token[0] == '#')
- break;
+ binarye = image_find_option(IMAGE_CFG_BINARY);
+ if (binarye) {
+ struct stat s;
+
+ ret = stat(binarye->binary.file, &s);
+ if (ret < 0) {
+ char *cwd = get_current_dir_name();
+ fprintf(stderr,
+ "Didn't find the file '%s' in '%s' which is mandatory to generate the image\n"
+ "This file generally contains the DDR3 training code, and should be extracted from an existing bootable\n"
+ "image for your board. See 'kwbimage -x' to extract it from an existing image.\n",
+ binarye->binary.file, cwd);
+ free(cwd);
+ return 0;
+ }
- /* Process rest as valid config command line */
- switch (j) {
- case CFG_COMMAND:
- cmd = get_table_entry_id (kwbimage_cmds,
- "Kwbimage command", token);
+ headersz += s.st_size +
+ binarye->binary.nargs * sizeof(unsigned int);
+ if (hasext)
+ *hasext = 1;
+ }
- if (cmd == CMD_INVALID)
- goto INVL_CMD;
- break;
+ /*
+ * The payload should be aligned on some reasonable
+ * boundary
+ */
+ return ALIGN_SUP(headersz, 4096);
+}
- case CFG_DATA0:
- kwbimage_check_cfgdata (token, cmd, kwbhdr);
- break;
+static void *image_create_v1(size_t *imagesz, struct image_tool_params *params,
+ int payloadsz)
+{
+ struct image_cfg_element *e, *binarye;
+ struct main_hdr_v1 *main_hdr;
+ size_t headersz;
+ void *image, *cur;
+ int hasext = 0;
+ int ret;
+
+ /*
+ * Calculate the size of the header and the size of the
+ * payload
+ */
+ headersz = image_headersz_v1(params, &hasext);
+ if (headersz == 0)
+ return NULL;
+
+ image = malloc(headersz);
+ if (!image) {
+ fprintf(stderr, "Cannot allocate memory for image\n");
+ return NULL;
+ }
- case CFG_DATA1:
- if (cmd != CMD_DATA)
- goto INVL_CMD;
-
- exthdr->rcfg[datacmd_cnt].rdata =
- check_get_hexval (token);
-
- if (datacmd_cnt > KWBIMAGE_MAX_CONFIG ) {
- printf ("Error:%s[%d] - Found more "
- "than max(%zd) allowed "
- "data configurations\n",
- fname, lineno,
- KWBIMAGE_MAX_CONFIG);
- exit (EXIT_FAILURE);
- } else
- datacmd_cnt++;
- break;
+ memset(image, 0, headersz);
+
+ cur = main_hdr = image;
+ cur += sizeof(struct main_hdr_v1);
+
+ /* Fill the main header */
+ main_hdr->blocksize = payloadsz - headersz + sizeof(uint32_t);
+ main_hdr->headersz_lsb = headersz & 0xFFFF;
+ main_hdr->headersz_msb = (headersz & 0xFFFF0000) >> 16;
+ main_hdr->destaddr = params->addr;
+ main_hdr->execaddr = params->ep;
+ main_hdr->srcaddr = headersz;
+ main_hdr->ext = hasext;
+ main_hdr->version = 1;
+ e = image_find_option(IMAGE_CFG_BOOT_FROM);
+ if (e)
+ main_hdr->blockid = e->bootfrom;
+ e = image_find_option(IMAGE_CFG_NAND_BLKSZ);
+ if (e)
+ main_hdr->nandblocksize = e->nandblksz / (64 * 1024);
+ e = image_find_option(IMAGE_CFG_NAND_BADBLK_LOCATION);
+ if (e)
+ main_hdr->nandbadblklocation = e->nandbadblklocation;
+
+ binarye = image_find_option(IMAGE_CFG_BINARY);
+ if (binarye) {
+ struct opt_hdr_v1 *hdr = cur;
+ unsigned int *args;
+ size_t binhdrsz;
+ struct stat s;
+ int argi;
+ FILE *bin;
+
+ hdr->headertype = OPT_HDR_V1_BINARY_TYPE;
+
+ bin = fopen(binarye->binary.file, "r");
+ if (!bin) {
+ fprintf(stderr, "Cannot open binary file %s\n",
+ binarye->binary.file);
+ return NULL;
+ }
+
+ fstat(fileno(bin), &s);
+
+ binhdrsz = sizeof(struct opt_hdr_v1) +
+ (binarye->binary.nargs + 1) * sizeof(unsigned int) +
+ s.st_size;
+ hdr->headersz_lsb = binhdrsz & 0xFFFF;
+ hdr->headersz_msb = (binhdrsz & 0xFFFF0000) >> 16;
+
+ cur += sizeof(struct opt_hdr_v1);
+
+ args = cur;
+ *args = binarye->binary.nargs;
+ args++;
+ for (argi = 0; argi < binarye->binary.nargs; argi++)
+ args[argi] = binarye->binary.args[argi];
+
+ cur += (binarye->binary.nargs + 1) * sizeof(unsigned int);
+
+ ret = fread(cur, s.st_size, 1, bin);
+ if (ret != 1) {
+ fprintf(stderr,
+ "Could not read binary image %s\n",
+ binarye->binary.file);
+ return NULL;
+ }
+
+ fclose(bin);
- default:
- goto INVL_CMD;
+ cur += s.st_size;
+
+ /*
+ * For now, we don't support more than one binary
+ * header, and no other header types are
+ * supported. So, the binary header is necessarily the
+ * last one
+ */
+ *((unsigned char *)cur) = 0;
+
+ cur += sizeof(uint32_t);
+ }
+
+ /* Calculate and set the header checksum */
+ main_hdr->checksum = image_checksum8(main_hdr, headersz);
+
+ *imagesz = headersz;
+ return image;
+}
+
+static int image_create_config_parse_oneline(char *line,
+ struct image_cfg_element *el)
+{
+ char *keyword, *saveptr;
+ char deliminiters[] = " \t";
+
+ keyword = strtok_r(line, deliminiters, &saveptr);
+ if (!strcmp(keyword, "VERSION")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ el->type = IMAGE_CFG_VERSION;
+ el->version = atoi(value);
+ } else if (!strcmp(keyword, "BOOT_FROM")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ el->type = IMAGE_CFG_BOOT_FROM;
+ el->bootfrom = image_boot_mode_id(value);
+ if (el->bootfrom < 0) {
+ fprintf(stderr,
+ "Invalid boot media '%s'\n", value);
+ return -1;
+ }
+ } else if (!strcmp(keyword, "NAND_BLKSZ")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ el->type = IMAGE_CFG_NAND_BLKSZ;
+ el->nandblksz = strtoul(value, NULL, 16);
+ } else if (!strcmp(keyword, "NAND_BADBLK_LOCATION")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ el->type = IMAGE_CFG_NAND_BADBLK_LOCATION;
+ el->nandbadblklocation =
+ strtoul(value, NULL, 16);
+ } else if (!strcmp(keyword, "NAND_ECC_MODE")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ el->type = IMAGE_CFG_NAND_ECC_MODE;
+ el->nandeccmode = image_nand_ecc_mode_id(value);
+ if (el->nandeccmode < 0) {
+ fprintf(stderr,
+ "Invalid NAND ECC mode '%s'\n", value);
+ return -1;
+ }
+ } else if (!strcmp(keyword, "NAND_PAGE_SIZE")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ el->type = IMAGE_CFG_NAND_PAGESZ;
+ el->nandpagesz = strtoul(value, NULL, 16);
+ } else if (!strcmp(keyword, "BINARY")) {
+ char *value = strtok_r(NULL, deliminiters, &saveptr);
+ int argi = 0;
+
+ el->type = IMAGE_CFG_BINARY;
+ el->binary.file = strdup(value);
+ while (1) {
+ value = strtok_r(NULL, deliminiters, &saveptr);
+ if (!value)
+ break;
+ el->binary.args[argi] = strtoul(value, NULL, 16);
+ argi++;
+ if (argi >= BINARY_MAX_ARGS) {
+ fprintf(stderr,
+ "Too many argument for binary\n");
+ return -1;
}
- j++;
}
+ el->binary.nargs = argi;
+ } else if (!strcmp(keyword, "DATA")) {
+ char *value1 = strtok_r(NULL, deliminiters, &saveptr);
+ char *value2 = strtok_r(NULL, deliminiters, &saveptr);
+
+ if (!value1 || !value2) {
+ fprintf(stderr,
+ "Invalid number of arguments for DATA\n");
+ return -1;
+ }
+
+ el->type = IMAGE_CFG_DATA;
+ el->regdata.raddr = strtoul(value1, NULL, 16);
+ el->regdata.rdata = strtoul(value2, NULL, 16);
+ } else {
+ fprintf(stderr, "Ignoring unknown line '%s'\n", line);
}
- if (line)
- free (line);
- fclose (fd);
- return;
+ return 0;
+}
/*
- * Invalid Command error reporring
- *
- * command CMD_DATA needs three strings on a line
- * whereas other commands need only two.
- *
- * if more than two/three (as per command type) are observed,
- * then error will be reported
+ * Parse the configuration file 'fcfg' into the array of configuration
+ * elements 'image_cfg', and return the number of configuration
+ * elements in 'cfgn'.
*/
-INVL_CMD:
- printf ("Error:%s[%d] - Invalid command\n", fname, lineno);
- exit (EXIT_FAILURE);
+static int image_create_config_parse(FILE *fcfg)
+{
+ int ret;
+ int cfgi = 0;
+
+ /* Parse the configuration file */
+ while (!feof(fcfg)) {
+ char *line;
+ char buf[256];
+
+ /* Read the current line */
+ memset(buf, 0, sizeof(buf));
+ line = fgets(buf, sizeof(buf), fcfg);
+ if (!line)
+ break;
+
+ /* Ignore useless lines */
+ if (line[0] == '\n' || line[0] == '#')
+ continue;
+
+ /* Strip final newline */
+ if (line[strlen(line) - 1] == '\n')
+ line[strlen(line) - 1] = 0;
+
+ /* Parse the current line */
+ ret = image_create_config_parse_oneline(line,
+ &image_cfg[cfgi]);
+ if (ret)
+ return ret;
+
+ cfgi++;
+
+ if (cfgi >= IMAGE_CFG_ELEMENT_MAX) {
+ fprintf(stderr,
+ "Too many configuration elements in .cfg file\n");
+ return -1;
+ }
+ }
+
+ cfgn = cfgi;
+ return 0;
+}
+
+static int image_get_version(void)
+{
+ struct image_cfg_element *e;
+
+ e = image_find_option(IMAGE_CFG_VERSION);
+ if (!e)
+ return -1;
+
+ return e->version;
+}
+
+static int image_version_file(const char *input)
+{
+ FILE *fcfg;
+ int version;
+ int ret;
+
+ fcfg = fopen(input, "r");
+ if (!fcfg) {
+ fprintf(stderr, "Could not open input file %s\n", input);
+ return -1;
+ }
+
+ image_cfg = malloc(IMAGE_CFG_ELEMENT_MAX *
+ sizeof(struct image_cfg_element));
+ if (!image_cfg) {
+ fprintf(stderr, "Cannot allocate memory\n");
+ fclose(fcfg);
+ return -1;
+ }
+
+ memset(image_cfg, 0,
+ IMAGE_CFG_ELEMENT_MAX * sizeof(struct image_cfg_element));
+ rewind(fcfg);
+
+ ret = image_create_config_parse(fcfg);
+ fclose(fcfg);
+ if (ret) {
+ free(image_cfg);
+ return -1;
+ }
+
+ version = image_get_version();
+ /* Fallback to version 0 is no version is provided in the cfg file */
+ if (version == -1)
+ version = 0;
+
+ free(image_cfg);
+
+ return version;
}
-static void kwbimage_set_header (void *ptr, struct stat *sbuf, int ifd,
+static void kwbimage_set_header(void *ptr, struct stat *sbuf, int ifd,
struct image_tool_params *params)
{
- struct kwb_header *hdr = (struct kwb_header *)ptr;
- bhr_t *mhdr = &hdr->kwb_hdr;
- extbhr_t *exthdr = &hdr->kwb_exthdr;
+ FILE *fcfg;
+ void *image = NULL;
+ int version;
+ size_t headersz;
uint32_t checksum;
+ int ret;
int size;
- /* Build and add image checksum header */
- checksum = kwbimage_checksum32 ((uint32_t *)ptr, sbuf->st_size, 0);
+ fcfg = fopen(params->imagename, "r");
+ if (!fcfg) {
+ fprintf(stderr, "Could not open input file %s\n",
+ params->imagename);
+ exit(EXIT_FAILURE);
+ }
+
+ image_cfg = malloc(IMAGE_CFG_ELEMENT_MAX *
+ sizeof(struct image_cfg_element));
+ if (!image_cfg) {
+ fprintf(stderr, "Cannot allocate memory\n");
+ fclose(fcfg);
+ exit(EXIT_FAILURE);
+ }
+
+ memset(image_cfg, 0,
+ IMAGE_CFG_ELEMENT_MAX * sizeof(struct image_cfg_element));
+ rewind(fcfg);
+
+ ret = image_create_config_parse(fcfg);
+ fclose(fcfg);
+ if (ret) {
+ free(image_cfg);
+ exit(EXIT_FAILURE);
+ }
+
+ version = image_get_version();
+ /* Fallback to version 0 is no version is provided in the cfg file */
+ if (version == -1)
+ version = 0;
+
+ if (version == 0)
+ image = image_create_v0(&headersz, params, sbuf->st_size);
+ else if (version == 1)
+ image = image_create_v1(&headersz, params, sbuf->st_size);
+
+ if (!image) {
+ fprintf(stderr, "Could not create image\n");
+ free(image_cfg);
+ exit(EXIT_FAILURE);
+ }
+
+ free(image_cfg);
- size = write (ifd, &checksum, sizeof(uint32_t));
+ /* Build and add image checksum header */
+ checksum = image_checksum32((uint32_t *)ptr, sbuf->st_size);
+ size = write(ifd, &checksum, sizeof(uint32_t));
if (size != sizeof(uint32_t)) {
- printf ("Error:%s - Checksum write %d bytes %s\n",
+ fprintf(stderr, "Error:%s - Checksum write %d bytes %s\n",
params->cmdname, size, params->imagefile);
- exit (EXIT_FAILURE);
+ exit(EXIT_FAILURE);
}
sbuf->st_size += sizeof(uint32_t);
- mhdr->blocksize = sbuf->st_size - sizeof(struct kwb_header);
- mhdr->srcaddr = sizeof(struct kwb_header);
- mhdr->destaddr= params->addr;
- mhdr->execaddr =params->ep;
- mhdr->ext = 0x1; /* header extension appended */
-
- kwdimage_set_ext_header (hdr, params->imagename);
- /* calculate checksums */
- mhdr->checkSum = kwbimage_checksum8 ((void *)mhdr, sizeof(bhr_t), 0);
- exthdr->checkSum = kwbimage_checksum8 ((void *)exthdr,
- sizeof(extbhr_t), 0);
-}
-
-static int kwbimage_verify_header (unsigned char *ptr, int image_size,
- struct image_tool_params *params)
-{
- struct kwb_header *hdr = (struct kwb_header *)ptr;
- bhr_t *mhdr = &hdr->kwb_hdr;
- extbhr_t *exthdr = &hdr->kwb_exthdr;
- uint8_t calc_hdrcsum;
- uint8_t calc_exthdrcsum;
-
- calc_hdrcsum = kwbimage_checksum8 ((void *)mhdr,
- sizeof(bhr_t) - sizeof(uint8_t), 0);
- if (calc_hdrcsum != mhdr->checkSum)
- return -FDT_ERR_BADSTRUCTURE; /* mhdr csum not matched */
-
- calc_exthdrcsum = kwbimage_checksum8 ((void *)exthdr,
- sizeof(extbhr_t) - sizeof(uint8_t), 0);
- if (calc_exthdrcsum != exthdr->checkSum)
- return -FDT_ERR_BADSTRUCTURE; /* exthdr csum not matched */
+ /* Finally copy the header into the image area */
+ memcpy(ptr, image, headersz);
- return 0;
+ free(image);
}
-static void kwbimage_print_header (const void *ptr)
+static void kwbimage_print_header(const void *ptr)
{
- struct kwb_header *hdr = (struct kwb_header *) ptr;
- bhr_t *mhdr = &hdr->kwb_hdr;
- char *name = get_table_entry_name (kwbimage_bootops,
- "Kwbimage boot option",
- (int) mhdr->blockid);
-
- printf ("Image Type: Kirkwood Boot from %s Image\n", name);
- printf ("Data Size: ");
- genimg_print_size (mhdr->blocksize - sizeof(uint32_t));
- printf ("Load Address: %08x\n", mhdr->destaddr);
- printf ("Entry Point: %08x\n", mhdr->execaddr);
+ struct main_hdr_v0 *mhdr = (struct main_hdr_v0 *)ptr;
+
+ printf("Image Type: MVEBU Boot from %s Image\n",
+ image_boot_mode_name(mhdr->blockid));
+ printf("Data Size: ");
+ printf("Image version:%d\n", image_version((void *)ptr));
+ genimg_print_size(mhdr->blocksize - sizeof(uint32_t));
+ printf("Load Address: %08x\n", mhdr->destaddr);
+ printf("Entry Point: %08x\n", mhdr->execaddr);
}
-static int kwbimage_check_image_types (uint8_t type)
+static int kwbimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_KWBIMAGE)
return EXIT_SUCCESS;
@@ -366,18 +807,91 @@ static int kwbimage_check_image_types (uint8_t type)
return EXIT_FAILURE;
}
+static int kwbimage_verify_header(unsigned char *ptr, int image_size,
+ struct image_tool_params *params)
+{
+ struct main_hdr_v0 *main_hdr;
+ struct ext_hdr_v0 *ext_hdr;
+ uint8_t checksum;
+
+ main_hdr = (void *)ptr;
+ checksum = image_checksum8(ptr,
+ sizeof(struct main_hdr_v0));
+ if (checksum != main_hdr->checksum)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ /* Only version 0 extended header has checksum */
+ if (image_version((void *)ptr) == 0) {
+ ext_hdr = (void *)ptr + sizeof(struct main_hdr_v0);
+ checksum = image_checksum8(ext_hdr,
+ sizeof(struct ext_hdr_v0));
+ if (checksum != ext_hdr->checksum)
+ return -FDT_ERR_BADSTRUCTURE;
+ }
+
+ return 0;
+}
+
+static int kwbimage_generate(struct image_tool_params *params,
+ struct image_type_params *tparams)
+{
+ int alloc_len;
+ void *hdr;
+ int version = 0;
+
+ version = image_version_file(params->imagename);
+ if (version == 0) {
+ alloc_len = sizeof(struct main_hdr_v0) +
+ sizeof(struct ext_hdr_v0);
+ } else {
+ alloc_len = image_headersz_v1(params, NULL);
+ }
+
+ hdr = malloc(alloc_len);
+ if (!hdr) {
+ fprintf(stderr, "%s: malloc return failure: %s\n",
+ params->cmdname, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ memset(hdr, 0, alloc_len);
+ tparams->header_size = alloc_len;
+ tparams->hdr = hdr;
+
+ return 0;
+}
+
+/*
+ * Report Error if xflag is set in addition to default
+ */
+static int kwbimage_check_params(struct image_tool_params *params)
+{
+ if (!strlen(params->imagename)) {
+ fprintf(stderr, "Error:%s - Configuration file not specified, "
+ "it is needed for kwbimage generation\n",
+ params->cmdname);
+ return CFG_INVALID;
+ }
+
+ return (params->dflag && (params->fflag || params->lflag)) ||
+ (params->fflag && (params->dflag || params->lflag)) ||
+ (params->lflag && (params->dflag || params->fflag)) ||
+ (params->xflag) || !(strlen(params->imagename));
+}
+
/*
* kwbimage type parameters definition
*/
static struct image_type_params kwbimage_params = {
- .name = "Kirkwood Boot Image support",
- .header_size = sizeof(struct kwb_header),
- .hdr = (void*)&kwbimage_header,
+ .name = "Marvell MVEBU Boot Image support",
+ .header_size = 0, /* no fixed header size */
+ .hdr = NULL,
+ .vrec_header = kwbimage_generate,
.check_image_type = kwbimage_check_image_types,
- .verify_header = kwbimage_verify_header,
- .print_header = kwbimage_print_header,
- .set_header = kwbimage_set_header,
- .check_params = kwbimage_check_params,
+ .verify_header = kwbimage_verify_header,
+ .print_header = kwbimage_print_header,
+ .set_header = kwbimage_set_header,
+ .check_params = kwbimage_check_params,
};
void init_kwb_image_type (void)
--
2.0.4
More information about the U-Boot
mailing list