[U-Boot] [PATCH 3/4] mtd: nand: add Freescale NFC driver
Stefan Agner
stefan at agner.ch
Wed Aug 6 10:59:37 CEST 2014
This adds initial support for Freescale NFC (NAND Flash Controller).
The IP is used in ARM based Vybrid SoCs as well as on some PowerPC
devices. This driver is only tested on Vybrid.
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsl_nfc.c | 676 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 677 insertions(+)
create mode 100644 drivers/mtd/nand/fsl_nfc.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index bf1312a..85cb0dd 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
obj-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
+obj-$(CONFIG_NAND_FSL_NFC) += fsl_nfc.o
obj-$(CONFIG_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
obj-$(CONFIG_NAND_NDFC) += ndfc.o
diff --git a/drivers/mtd/nand/fsl_nfc.c b/drivers/mtd/nand/fsl_nfc.c
new file mode 100644
index 0000000..df2c8be
--- /dev/null
+++ b/drivers/mtd/nand/fsl_nfc.c
@@ -0,0 +1,676 @@
+/*
+ * Copyright 2009-2014 Freescale Semiconductor, Inc. and others
+ *
+ * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
+ * Ported to U-Boot by Stefan Agner
+ * Based on RFC driver posted on Kernel Mailing list by Bill Pringlemeir
+ * Jason ported to M54418TWR and MVFA5.
+ * Authors: Stefan Agner <stefan.agner at toradex.com>
+ * Bill Pringlemeir <bpringlemeir at nbsps.com>
+ * Shaohui Xie <b21989 at freescale.com>
+ * Jason Jin <Jason.jin at freescale.com>
+ *
+ * Based on original driver mpc5121_nfc.c.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Limitations:
+ * - Untested on MPC5125 and M54418.
+ * - DMA not used.
+ * - 2K pages or less.
+ * - Only 2K page w. 64+OOB and hardware ECC.
+ */
+
+#include <common.h>
+#include <malloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <nand.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#define DRV_NAME "fsl_nfc"
+
+/* Register Offsets */
+#define NFC_FLASH_CMD1 0x3F00
+#define NFC_FLASH_CMD2 0x3F04
+#define NFC_COL_ADDR 0x3F08
+#define NFC_ROW_ADDR 0x3F0c
+#define NFC_ROW_ADDR_INC 0x3F14
+#define NFC_FLASH_STATUS1 0x3F18
+#define NFC_FLASH_STATUS2 0x3F1c
+#define NFC_CACHE_SWAP 0x3F28
+#define NFC_SECTOR_SIZE 0x3F2c
+#define NFC_FLASH_CONFIG 0x3F30
+#define NFC_IRQ_STATUS 0x3F38
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n) ((n) * 0x1000)
+
+#define PAGE_2K 0x0800
+#define OOB_64 0x0040
+
+/*
+ * NFC_CMD2[CODE] values. See section:
+ * - 31.4.7 Flash Command Code Description, Vybrid manual
+ * - 23.8.6 Flash Command Sequencer, MPC5125 manual
+ *
+ * Briefly these are bitmasks of controller cycles.
+ */
+#define READ_PAGE_CMD_CODE 0x7EE0
+#define PROGRAM_PAGE_CMD_CODE 0x7FC0
+#define ERASE_CMD_CODE 0x4EC0
+#define READ_ID_CMD_CODE 0x4804
+#define RESET_CMD_CODE 0x4040
+#define STATUS_READ_CMD_CODE 0x4068
+
+/* NFC ECC mode define */
+#define ECC_BYPASS 0
+#define ECC_45_BYTE 6
+
+/*** Register Mask and bit definitions */
+
+/* NFC_FLASH_CMD1 Field */
+#define CMD_BYTE2_MASK 0xFF000000
+#define CMD_BYTE2_SHIFT 24
+
+/* NFC_FLASH_CM2 Field */
+#define CMD_BYTE1_MASK 0xFF000000
+#define CMD_BYTE1_SHIFT 24
+#define CMD_CODE_MASK 0x00FFFF00
+#define CMD_CODE_SHIFT 8
+#define BUFNO_MASK 0x00000006
+#define BUFNO_SHIFT 1
+#define START_BIT (1<<0)
+
+/* NFC_COL_ADDR Field */
+#define COL_ADDR_MASK 0x0000FFFF
+#define COL_ADDR_SHIFT 0
+
+/* NFC_ROW_ADDR Field */
+#define ROW_ADDR_MASK 0x00FFFFFF
+#define ROW_ADDR_SHIFT 0
+#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000
+#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28
+#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000
+#define ROW_ADDR_CHIP_SEL_SHIFT 24
+
+/* NFC_FLASH_STATUS2 Field */
+#define STATUS_BYTE1_MASK 0x000000FF
+
+/* NFC_FLASH_CONFIG Field */
+#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000
+#define CONFIG_ECC_SRAM_ADDR_SHIFT 22
+#define CONFIG_ECC_SRAM_REQ_BIT (1<<21)
+#define CONFIG_DMA_REQ_BIT (1<<20)
+#define CONFIG_ECC_MODE_MASK 0x000E0000
+#define CONFIG_ECC_MODE_SHIFT 17
+#define CONFIG_FAST_FLASH_BIT (1<<16)
+#define CONFIG_16BIT (1<<7)
+#define CONFIG_BOOT_MODE_BIT (1<<6)
+#define CONFIG_ADDR_AUTO_INCR_BIT (1<<5)
+#define CONFIG_BUFNO_AUTO_INCR_BIT (1<<4)
+#define CONFIG_PAGE_CNT_MASK 0xF
+#define CONFIG_PAGE_CNT_SHIFT 0
+
+/* NFC_IRQ_STATUS Field */
+#define IDLE_IRQ_BIT (1<<29)
+#define IDLE_EN_BIT (1<<20)
+#define CMD_DONE_CLEAR_BIT (1<<18)
+#define IDLE_CLEAR_BIT (1<<17)
+
+#define NFC_TIMEOUT (1000)
+
+/* ECC status placed at end of buffers. */
+#define ECC_SRAM_ADDR ((PAGE_2K+256-8) >> 3)
+#define ECC_STATUS_MASK 0x80
+#define ECC_ERR_COUNT 0x3F
+
+struct fsl_nfc {
+ struct mtd_info *mtd;
+ struct nand_chip chip;
+ struct device *dev;
+ void __iomem *regs;
+ //wait_queue_head_t irq_waitq;
+ uint column;
+ int spareonly;
+ int page;
+ /* Status and ID are in alternate locations. */
+ int alt_buf;
+#define ALT_BUF_ID 1
+#define ALT_BUF_STAT 2
+ struct clk *clk;
+};
+
+#define mtd_to_nfc(_mtd) (struct fsl_nfc *)((struct nand_chip *)_mtd->priv)->priv;
+
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+static struct nand_ecclayout nfc_ecc45 = {
+ .eccbytes = 45,
+ .eccpos = {19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = {
+ {.offset = 8,
+ .length = 11} }
+};
+
+static u32 nfc_read(struct mtd_info *mtd, uint reg)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+
+ if (reg == NFC_FLASH_STATUS1 ||
+ reg == NFC_FLASH_STATUS2 ||
+ reg == NFC_IRQ_STATUS)
+ return __raw_readl(nfc->regs + reg);
+ /* Gang read/writes together for most registers. */
+ else
+ return *(u32 *)(nfc->regs + reg);
+}
+
+static void nfc_write(struct mtd_info *mtd, uint reg, u32 val)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+
+ if (reg == NFC_FLASH_STATUS1 ||
+ reg == NFC_FLASH_STATUS2 ||
+ reg == NFC_IRQ_STATUS)
+ __raw_writel(val, nfc->regs + reg);
+ /* Gang read/writes together for most registers. */
+ else
+ *(u32 *)(nfc->regs + reg) = val;
+}
+
+static void nfc_set(struct mtd_info *mtd, uint reg, u32 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
+}
+
+static void nfc_clear(struct mtd_info *mtd, uint reg, u32 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
+}
+
+static void nfc_set_field(struct mtd_info *mtd, u32 reg,
+ u32 mask, u32 shift, u32 val)
+{
+ nfc_write(mtd, reg, (nfc_read(mtd, reg) & (~mask)) | val << shift);
+}
+
+/* Clear flags for upcoming command */
+static void nfc_clear_status(struct mtd_info *mtd)
+{
+ nfc_set(mtd, NFC_IRQ_STATUS, CMD_DONE_CLEAR_BIT);
+ nfc_set(mtd, NFC_IRQ_STATUS, IDLE_CLEAR_BIT);
+}
+
+/* Wait for complete operation */
+static void nfc_done(struct mtd_info *mtd)
+{
+ uint start;
+
+ nfc_set(mtd, NFC_FLASH_CMD2, START_BIT);
+ barrier();
+
+ start = get_timer(0);
+
+ while (!(nfc_read(mtd, NFC_IRQ_STATUS) & IDLE_IRQ_BIT)) {
+ if (get_timer(start) > NFC_TIMEOUT)
+ printf("Timeout while waiting for BUSY.\n");
+ }
+ nfc_clear_status(mtd);
+}
+
+static u8 nfc_get_id(struct mtd_info *mtd, int col)
+{
+ u32 flash_id;
+
+ if (col < 4) {
+ flash_id = nfc_read(mtd, NFC_FLASH_STATUS1);
+ return (flash_id >> (3-col)*8) & 0xff;
+ } else {
+ flash_id = nfc_read(mtd, NFC_FLASH_STATUS2);
+ return flash_id >> 24;
+ }
+}
+
+static u8 nfc_get_status(struct mtd_info *mtd)
+{
+ return nfc_read(mtd, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
+}
+
+/* Single command */
+static void nfc_send_command(struct mtd_info *mtd, u32 cmd_byte1,
+ u32 cmd_code)
+{
+ nfc_clear_status(mtd);
+
+ nfc_set_field(mtd, NFC_FLASH_CMD2, CMD_BYTE1_MASK,
+ CMD_BYTE1_SHIFT, cmd_byte1);
+
+ nfc_clear(mtd, NFC_FLASH_CMD2, BUFNO_MASK);
+
+ nfc_set_field(mtd, NFC_FLASH_CMD2, CMD_CODE_MASK,
+ CMD_CODE_SHIFT, cmd_code);
+}
+
+/* Two commands */
+static void nfc_send_commands(struct mtd_info *mtd, u32 cmd_byte1,
+ u32 cmd_byte2, u32 cmd_code)
+{
+ nfc_send_command(mtd, cmd_byte1, cmd_code);
+
+ nfc_set_field(mtd, NFC_FLASH_CMD1, CMD_BYTE2_MASK,
+ CMD_BYTE2_SHIFT, cmd_byte2);
+}
+
+static void nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
+{
+ if (column != -1) {
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+ if (nfc->chip.options | NAND_BUSWIDTH_16)
+ column = column/2;
+ nfc_set_field(mtd, NFC_COL_ADDR, COL_ADDR_MASK,
+ COL_ADDR_SHIFT, column);
+ }
+ if (page != -1)
+ nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK,
+ ROW_ADDR_SHIFT, page);
+}
+
+/* Send command to NAND chip */
+static void nfc_command(struct mtd_info *mtd, unsigned command,
+ int column, int page)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+
+ nfc->column = max(column, 0);
+ nfc->spareonly = 0;
+ nfc->alt_buf = 0;
+
+ switch (command) {
+ case NAND_CMD_PAGEPROG:
+ nfc->page = -1;
+ nfc_send_commands(mtd, NAND_CMD_SEQIN,
+ command, PROGRAM_PAGE_CMD_CODE);
+ nfc_addr_cycle(mtd, column, page);
+ break;
+
+ case NAND_CMD_RESET:
+ nfc_send_command(mtd, command, RESET_CMD_CODE);
+ break;
+ /*
+ * NFC does not support sub-page reads and writes,
+ * so emulate them using full page transfers.
+ */
+ case NAND_CMD_READOOB:
+ nfc->spareonly = 1;
+ case NAND_CMD_SEQIN: /* Pre-read for partial writes. */
+ case NAND_CMD_READ0:
+ column = 0;
+ /* Already read? */
+ if (nfc->page == page)
+ return;
+ nfc->page = page;
+ nfc_send_commands(mtd, NAND_CMD_READ0,
+ NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
+ nfc_addr_cycle(mtd, column, page);
+ break;
+
+ case NAND_CMD_ERASE1:
+ if (nfc->page == page)
+ nfc->page = -1;
+ nfc_send_commands(mtd, command,
+ NAND_CMD_ERASE2, ERASE_CMD_CODE);
+ nfc_addr_cycle(mtd, column, page);
+ break;
+
+ case NAND_CMD_READID:
+ nfc->alt_buf = ALT_BUF_ID;
+ nfc_send_command(mtd, command, READ_ID_CMD_CODE);
+ break;
+
+ case NAND_CMD_STATUS:
+ nfc->alt_buf = ALT_BUF_STAT;
+ nfc_send_command(mtd, command, STATUS_READ_CMD_CODE);
+ break;
+ default:
+ return;
+ }
+
+ nfc_done(mtd);
+}
+
+static void nfc_read_spare(struct mtd_info *mtd, void *buf, int len)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+
+ len = min(mtd->oobsize, (uint)len);
+ if (len > 0)
+ memcpy(buf, nfc->regs + mtd->writesize, len);
+}
+
+/* Read data from NFC buffers */
+static void nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+ uint c = nfc->column;
+ uint l;
+
+ /* Handle main area */
+ if (!nfc->spareonly) {
+
+ l = min((uint)len, mtd->writesize - c);
+ nfc->column += l;
+
+ if (!nfc->alt_buf)
+ memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, l);
+ else
+ if (nfc->alt_buf & ALT_BUF_ID)
+ *buf = nfc_get_id(mtd, c);
+ else
+ *buf = nfc_get_status(mtd);
+ buf += l;
+ len -= l;
+ }
+
+ /* Handle spare area access */
+ if (len) {
+ nfc->column += len;
+ nfc_read_spare(mtd, buf, len);
+ }
+}
+
+/* Write data to NFC buffers */
+static void nfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+ uint c = nfc->column;
+ uint l;
+
+ l = min((uint)len, mtd->writesize + mtd->oobsize - c);
+ nfc->column += l;
+ memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
+}
+
+/* Read byte from NFC buffers */
+static u8 nfc_read_byte(struct mtd_info *mtd)
+{
+ u8 tmp;
+ nfc_read_buf(mtd, &tmp, sizeof(tmp));
+ return tmp;
+}
+
+/* Read word from NFC buffers */
+static u16 nfc_read_word(struct mtd_info *mtd)
+{
+ u16 tmp;
+ nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
+ return tmp;
+}
+
+/* If not provided, upper layers apply a fixed delay. */
+static int nfc_dev_ready(struct mtd_info *mtd)
+{
+ /* NFC handles R/B internally; always ready. */
+ return 1;
+}
+
+/*
+ * Vybrid only. MPC5125 has full RB and four CS. Assume boot loader
+ * has set this register for now.
+ */
+static void
+nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+#ifdef CONFIG_VF610
+ nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_CHIP_SEL_RB_MASK,
+ ROW_ADDR_CHIP_SEL_RB_SHIFT, 1);
+
+ if (chip == 0)
+ nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_CHIP_SEL_MASK,
+ ROW_ADDR_CHIP_SEL_SHIFT, 1);
+ else if (chip == 1)
+ nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_CHIP_SEL_MASK,
+ ROW_ADDR_CHIP_SEL_SHIFT, 2);
+ else
+ nfc_clear(mtd, NFC_ROW_ADDR, ROW_ADDR_CHIP_SEL_MASK);
+#endif
+}
+
+/* Count the number of 0's in buff upto max_bits */
+static int count_written_bits(uint8_t *buff, int size, int max_bits)
+{
+ int k, written_bits = 0;
+
+ for (k = 0; k < size; k++) {
+ written_bits += hweight8(~buff[k]);
+ if (written_bits > max_bits)
+ break;
+ }
+
+ return written_bits;
+}
+
+static int nfc_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct fsl_nfc *nfc = mtd_to_nfc(mtd);
+ u32 ecc_status;
+ u8 ecc_count;
+ int flip;
+
+ /*
+ * Errata: ECC status is stored at NFC_CFG[ECCADD] +4 for
+ * little-endian and +7 for big-endian SOC. Access as 32 bits
+ * and use low byte.
+ */
+ ecc_status = __raw_readl(nfc->regs + ECC_SRAM_ADDR * 8 + 4);
+ ecc_count = ecc_status & ECC_ERR_COUNT;
+ if (!(ecc_status & ECC_STATUS_MASK))
+ return ecc_count;
+
+ /* If 'ecc_count' zero or less then buffer is all 0xff or erased. */
+ flip = count_written_bits(dat, nfc->chip.ecc.size, ecc_count);
+
+ /* ECC failed. */
+ if (flip > ecc_count)
+ return -1;
+
+ /* Erased page. */
+ memset(dat, 0xff, nfc->chip.ecc.size);
+ return 0;
+}
+
+static int nfc_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ return 0;
+}
+
+static void nfc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+}
+
+struct nfc_config {
+ int hardware_ecc;
+ int width;
+ int flash_bbt;
+};
+
+//static int nfc_probe(struct platform_device *pdev)
+int board_nand_init(struct nand_chip *chip)
+{
+ struct fsl_nfc *nfc;
+ struct mtd_info *mtd;
+ uint chips_no = 0;
+ int err = 0;
+ int page_sz;
+ struct nfc_config cfg = {
+ .hardware_ecc = 1,
+#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
+ .width = 16,
+#else
+ .width = 8,
+#endif
+ .flash_bbt = 1,
+ };
+
+ if (chip->IO_ADDR_R == NULL)
+ return -1;
+
+ nfc = malloc(sizeof(*nfc));
+ if (!nfc) {
+ printf(KERN_ERR DRV_NAME ": Memory exhausted!\n");
+ return -ENOMEM;
+ }
+
+ nfc->regs = (void __iomem *)chip->IO_ADDR_R; //CONFIG_SYS_NAND_BASE;
+
+ mtd = &nand_info[chips_no++];
+ mtd->priv = chip;
+ chip->priv = nfc;
+
+ if (cfg.width == 16) {
+ chip->options |= NAND_BUSWIDTH_16;
+ nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
+ } else {
+ chip->options &= ~NAND_BUSWIDTH_16;
+ nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
+ }
+
+ chip->dev_ready = nfc_dev_ready;
+ chip->cmdfunc = nfc_command;
+ chip->read_byte = nfc_read_byte;
+ chip->read_word = nfc_read_word;
+ chip->read_buf = nfc_read_buf;
+ chip->write_buf = nfc_write_buf;
+ chip->select_chip = nfc_select_chip;
+
+ /* Bad block options. */
+ if (cfg.flash_bbt)
+ chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_CREATE;
+
+ /* Default to software ECC until flash ID. */
+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
+ CONFIG_ECC_MODE_MASK,
+ CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
+
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+
+ page_sz = PAGE_2K + OOB_64;
+ page_sz += cfg.width == 16 ? 1 : 0;
+ nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+
+ /* Set configuration register. */
+ nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
+ nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
+ nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
+ nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
+ nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
+
+ /* Enable Idle IRQ */
+ nfc_set(mtd, NFC_IRQ_STATUS, IDLE_EN_BIT);
+
+ /* PAGE_CNT = 1 */
+ nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
+ CONFIG_PAGE_CNT_SHIFT, 1);
+
+ /* Set ECC_STATUS offset */
+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
+ CONFIG_ECC_SRAM_ADDR_MASK,
+ CONFIG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR);
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) {
+ err = -ENXIO;
+ goto error;
+ }
+
+ chip->ecc.mode = NAND_ECC_SOFT; /* default */
+
+ page_sz = mtd->writesize + mtd->oobsize;
+
+ /* Single buffer only, max 256 OOB minus ECC status */
+ if (page_sz > PAGE_2K + 256 - 8) {
+ dev_err(nfc->dev, "Unsupported flash size\n");
+ err = -ENXIO;
+ goto error;
+ }
+ page_sz += cfg.width == 16 ? 1 : 0;
+ nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+
+ if (cfg.hardware_ecc) {
+ if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
+ dev_err(nfc->dev, "Unsupported flash with hwecc\n");
+ err = -ENXIO;
+ goto error;
+ }
+
+ chip->ecc.layout = &nfc_ecc45;
+
+ /* propagate ecc.layout to mtd_info */
+ mtd->ecclayout = chip->ecc.layout;
+ chip->ecc.calculate = nfc_calculate_ecc;
+ chip->ecc.hwctl = nfc_enable_hwecc;
+ chip->ecc.correct = nfc_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+
+ chip->ecc.bytes = 45;
+ chip->ecc.size = PAGE_2K;
+ chip->ecc.strength = 24;
+
+ /* set ECC mode to 45 bytes OOB with 24 bits correction */
+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
+ CONFIG_ECC_MODE_MASK,
+ CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
+
+ /* Enable ECC_STATUS */
+ nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
+
+ }
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ err = -ENXIO;
+ goto error;
+ }
+
+ return 0;
+
+error:
+ return err;
+}
--
2.0.4
More information about the U-Boot
mailing list