[U-Boot] [PATCH v5 04/13] buildman: Move BuilderThread code to its own file

Simon Glass sjg at chromium.org
Fri Aug 8 13:10:21 CEST 2014


The builder.py file is getting too long, so split out some code.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v5: None
Changes in v4:
- Fix missing import in builder.py

Changes in v3:
- Add new patch to move BuilderThread code to its own file

Changes in v2: None

 tools/buildman/builder.py       | 439 +---------------------------------------
 tools/buildman/builderthread.py | 434 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 442 insertions(+), 431 deletions(-)
 create mode 100644 tools/buildman/builderthread.py

diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py
index d2b72d5..e2da0eb 100644
--- a/tools/buildman/builder.py
+++ b/tools/buildman/builder.py
@@ -6,7 +6,6 @@
 #
 
 import collections
-import errno
 from datetime import datetime, timedelta
 import glob
 import os
@@ -15,9 +14,9 @@ import Queue
 import shutil
 import string
 import sys
-import threading
 import time
 
+import builderthread
 import command
 import gitutil
 import terminal
@@ -97,428 +96,6 @@ OUTCOME_OK, OUTCOME_WARNING, OUTCOME_ERROR, OUTCOME_UNKNOWN = range(4)
 trans_valid_chars = string.maketrans("/: ", "---")
 
 
-def Mkdir(dirname):
-    """Make a directory if it doesn't already exist.
-
-    Args:
-        dirname: Directory to create
-    """
-    try:
-        os.mkdir(dirname)
-    except OSError as err:
-        if err.errno == errno.EEXIST:
-            pass
-        else:
-            raise
-
-class BuilderJob:
-    """Holds information about a job to be performed by a thread
-
-    Members:
-        board: Board object to build
-        commits: List of commit options to build.
-    """
-    def __init__(self):
-        self.board = None
-        self.commits = []
-
-
-class ResultThread(threading.Thread):
-    """This thread processes results from builder threads.
-
-    It simply passes the results on to the builder. There is only one
-    result thread, and this helps to serialise the build output.
-    """
-    def __init__(self, builder):
-        """Set up a new result thread
-
-        Args:
-            builder: Builder which will be sent each result
-        """
-        threading.Thread.__init__(self)
-        self.builder = builder
-
-    def run(self):
-        """Called to start up the result thread.
-
-        We collect the next result job and pass it on to the build.
-        """
-        while True:
-            result = self.builder.out_queue.get()
-            self.builder.ProcessResult(result)
-            self.builder.out_queue.task_done()
-
-
-class BuilderThread(threading.Thread):
-    """This thread builds U-Boot for a particular board.
-
-    An input queue provides each new job. We run 'make' to build U-Boot
-    and then pass the results on to the output queue.
-
-    Members:
-        builder: The builder which contains information we might need
-        thread_num: Our thread number (0-n-1), used to decide on a
-                temporary directory
-    """
-    def __init__(self, builder, thread_num):
-        """Set up a new builder thread"""
-        threading.Thread.__init__(self)
-        self.builder = builder
-        self.thread_num = thread_num
-
-    def Make(self, commit, brd, stage, cwd, *args, **kwargs):
-        """Run 'make' on a particular commit and board.
-
-        The source code will already be checked out, so the 'commit'
-        argument is only for information.
-
-        Args:
-            commit: Commit object that is being built
-            brd: Board object that is being built
-            stage: Stage of the build. Valid stages are:
-                        distclean - can be called to clean source
-                        config - called to configure for a board
-                        build - the main make invocation - it does the build
-            args: A list of arguments to pass to 'make'
-            kwargs: A list of keyword arguments to pass to command.RunPipe()
-
-        Returns:
-            CommandResult object
-        """
-        return self.builder.do_make(commit, brd, stage, cwd, *args,
-                **kwargs)
-
-    def RunCommit(self, commit_upto, brd, work_dir, do_config, force_build,
-                  force_build_failures):
-        """Build a particular commit.
-
-        If the build is already done, and we are not forcing a build, we skip
-        the build and just return the previously-saved results.
-
-        Args:
-            commit_upto: Commit number to build (0...n-1)
-            brd: Board object to build
-            work_dir: Directory to which the source will be checked out
-            do_config: True to run a make <board>_defconfig on the source
-            force_build: Force a build even if one was previously done
-            force_build_failures: Force a bulid if the previous result showed
-                failure
-
-        Returns:
-            tuple containing:
-                - CommandResult object containing the results of the build
-                - boolean indicating whether 'make config' is still needed
-        """
-        # Create a default result - it will be overwritte by the call to
-        # self.Make() below, in the event that we do a build.
-        result = command.CommandResult()
-        result.return_code = 0
-        if self.builder.in_tree:
-            out_dir = work_dir
-        else:
-            out_dir = os.path.join(work_dir, 'build')
-
-        # Check if the job was already completed last time
-        done_file = self.builder.GetDoneFile(commit_upto, brd.target)
-        result.already_done = os.path.exists(done_file)
-        will_build = (force_build or force_build_failures or
-            not result.already_done)
-        if result.already_done and will_build:
-            # Get the return code from that build and use it
-            with open(done_file, 'r') as fd:
-                result.return_code = int(fd.readline())
-            err_file = self.builder.GetErrFile(commit_upto, brd.target)
-            if os.path.exists(err_file) and os.stat(err_file).st_size:
-                result.stderr = 'bad'
-            elif not force_build:
-                # The build passed, so no need to build it again
-                will_build = False
-
-        if will_build:
-            # We are going to have to build it. First, get a toolchain
-            if not self.toolchain:
-                try:
-                    self.toolchain = self.builder.toolchains.Select(brd.arch)
-                except ValueError as err:
-                    result.return_code = 10
-                    result.stdout = ''
-                    result.stderr = str(err)
-                    # TODO(sjg at chromium.org): This gets swallowed, but needs
-                    # to be reported.
-
-            if self.toolchain:
-                # Checkout the right commit
-                if self.builder.commits:
-                    commit = self.builder.commits[commit_upto]
-                    if self.builder.checkout:
-                        git_dir = os.path.join(work_dir, '.git')
-                        gitutil.Checkout(commit.hash, git_dir, work_dir,
-                                         force=True)
-                else:
-                    commit = 'current'
-
-                # Set up the environment and command line
-                env = self.toolchain.MakeEnvironment()
-                Mkdir(out_dir)
-                args = []
-                cwd = work_dir
-                if not self.builder.in_tree:
-                    if commit_upto is None:
-                        # In this case we are building in the original source
-                        # directory (i.e. the current directory where buildman
-                        # is invoked. The output directory is set to this
-                        # thread's selected work directory.
-                        #
-                        # Symlinks can confuse U-Boot's Makefile since
-                        # we may use '..' in our path, so remove them.
-                        work_dir = os.path.realpath(work_dir)
-                        args.append('O=%s/build' % work_dir)
-                        cwd = None
-                    else:
-                        args.append('O=build')
-                args.append('-s')
-                if self.builder.num_jobs is not None:
-                    args.extend(['-j', str(self.builder.num_jobs)])
-                config_args = ['%s_defconfig' % brd.target]
-                config_out = ''
-                args.extend(self.builder.toolchains.GetMakeArguments(brd))
-
-                # If we need to reconfigure, do that now
-                if do_config:
-                    result = self.Make(commit, brd, 'distclean', cwd,
-                            'distclean', *args, env=env)
-                    result = self.Make(commit, brd, 'config', cwd,
-                            *(args + config_args), env=env)
-                    config_out = result.combined
-                    do_config = False   # No need to configure next time
-                if result.return_code == 0:
-                    result = self.Make(commit, brd, 'build', cwd, *args,
-                            env=env)
-                    result.stdout = config_out + result.stdout
-            else:
-                result.return_code = 1
-                result.stderr = 'No tool chain for %s\n' % brd.arch
-            result.already_done = False
-
-        result.toolchain = self.toolchain
-        result.brd = brd
-        result.commit_upto = commit_upto
-        result.out_dir = out_dir
-        return result, do_config
-
-    def _WriteResult(self, result, keep_outputs):
-        """Write a built result to the output directory.
-
-        Args:
-            result: CommandResult object containing result to write
-            keep_outputs: True to store the output binaries, False
-                to delete them
-        """
-        # Fatal error
-        if result.return_code < 0:
-            return
-
-        # Aborted?
-        if result.stderr and 'No child processes' in result.stderr:
-            return
-
-        if result.already_done:
-            return
-
-        # Write the output and stderr
-        output_dir = self.builder._GetOutputDir(result.commit_upto)
-        Mkdir(output_dir)
-        build_dir = self.builder.GetBuildDir(result.commit_upto,
-                result.brd.target)
-        Mkdir(build_dir)
-
-        outfile = os.path.join(build_dir, 'log')
-        with open(outfile, 'w') as fd:
-            if result.stdout:
-                fd.write(result.stdout)
-
-        errfile = self.builder.GetErrFile(result.commit_upto,
-                result.brd.target)
-        if result.stderr:
-            with open(errfile, 'w') as fd:
-                fd.write(result.stderr)
-        elif os.path.exists(errfile):
-            os.remove(errfile)
-
-        if result.toolchain:
-            # Write the build result and toolchain information.
-            done_file = self.builder.GetDoneFile(result.commit_upto,
-                    result.brd.target)
-            with open(done_file, 'w') as fd:
-                fd.write('%s' % result.return_code)
-            with open(os.path.join(build_dir, 'toolchain'), 'w') as fd:
-                print >>fd, 'gcc', result.toolchain.gcc
-                print >>fd, 'path', result.toolchain.path
-                print >>fd, 'cross', result.toolchain.cross
-                print >>fd, 'arch', result.toolchain.arch
-                fd.write('%s' % result.return_code)
-
-            with open(os.path.join(build_dir, 'toolchain'), 'w') as fd:
-                print >>fd, 'gcc', result.toolchain.gcc
-                print >>fd, 'path', result.toolchain.path
-
-            # Write out the image and function size information and an objdump
-            env = result.toolchain.MakeEnvironment()
-            lines = []
-            for fname in ['u-boot', 'spl/u-boot-spl']:
-                cmd = ['%snm' % self.toolchain.cross, '--size-sort', fname]
-                nm_result = command.RunPipe([cmd], capture=True,
-                        capture_stderr=True, cwd=result.out_dir,
-                        raise_on_error=False, env=env)
-                if nm_result.stdout:
-                    nm = self.builder.GetFuncSizesFile(result.commit_upto,
-                                    result.brd.target, fname)
-                    with open(nm, 'w') as fd:
-                        print >>fd, nm_result.stdout,
-
-                cmd = ['%sobjdump' % self.toolchain.cross, '-h', fname]
-                dump_result = command.RunPipe([cmd], capture=True,
-                        capture_stderr=True, cwd=result.out_dir,
-                        raise_on_error=False, env=env)
-                rodata_size = ''
-                if dump_result.stdout:
-                    objdump = self.builder.GetObjdumpFile(result.commit_upto,
-                                    result.brd.target, fname)
-                    with open(objdump, 'w') as fd:
-                        print >>fd, dump_result.stdout,
-                    for line in dump_result.stdout.splitlines():
-                        fields = line.split()
-                        if len(fields) > 5 and fields[1] == '.rodata':
-                            rodata_size = fields[2]
-
-                cmd = ['%ssize' % self.toolchain.cross, fname]
-                size_result = command.RunPipe([cmd], capture=True,
-                        capture_stderr=True, cwd=result.out_dir,
-                        raise_on_error=False, env=env)
-                if size_result.stdout:
-                    lines.append(size_result.stdout.splitlines()[1] + ' ' +
-                                 rodata_size)
-
-            # Write out the image sizes file. This is similar to the output
-            # of binutil's 'size' utility, but it omits the header line and
-            # adds an additional hex value at the end of each line for the
-            # rodata size
-            if len(lines):
-                sizes = self.builder.GetSizesFile(result.commit_upto,
-                                result.brd.target)
-                with open(sizes, 'w') as fd:
-                    print >>fd, '\n'.join(lines)
-
-        # Now write the actual build output
-        if keep_outputs:
-            patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map',
-                        'include/autoconf.mk', 'spl/u-boot-spl',
-                        'spl/u-boot-spl.bin']
-            for pattern in patterns:
-                file_list = glob.glob(os.path.join(result.out_dir, pattern))
-                for fname in file_list:
-                    shutil.copy(fname, build_dir)
-
-
-    def RunJob(self, job):
-        """Run a single job
-
-        A job consists of a building a list of commits for a particular board.
-
-        Args:
-            job: Job to build
-        """
-        brd = job.board
-        work_dir = self.builder.GetThreadDir(self.thread_num)
-        self.toolchain = None
-        if job.commits:
-            # Run 'make board_defconfig' on the first commit
-            do_config = True
-            commit_upto  = 0
-            force_build = False
-            for commit_upto in range(0, len(job.commits), job.step):
-                result, request_config = self.RunCommit(commit_upto, brd,
-                        work_dir, do_config,
-                        force_build or self.builder.force_build,
-                        self.builder.force_build_failures)
-                failed = result.return_code or result.stderr
-                did_config = do_config
-                if failed and not do_config:
-                    # If our incremental build failed, try building again
-                    # with a reconfig.
-                    if self.builder.force_config_on_failure:
-                        result, request_config = self.RunCommit(commit_upto,
-                            brd, work_dir, True, True, False)
-                        did_config = True
-                if not self.builder.force_reconfig:
-                    do_config = request_config
-
-                # If we built that commit, then config is done. But if we got
-                # an warning, reconfig next time to force it to build the same
-                # files that created warnings this time. Otherwise an
-                # incremental build may not build the same file, and we will
-                # think that the warning has gone away.
-                # We could avoid this by using -Werror everywhere...
-                # For errors, the problem doesn't happen, since presumably
-                # the build stopped and didn't generate output, so will retry
-                # that file next time. So we could detect warnings and deal
-                # with them specially here. For now, we just reconfigure if
-                # anything goes work.
-                # Of course this is substantially slower if there are build
-                # errors/warnings (e.g. 2-3x slower even if only 10% of builds
-                # have problems).
-                if (failed and not result.already_done and not did_config and
-                        self.builder.force_config_on_failure):
-                    # If this build failed, try the next one with a
-                    # reconfigure.
-                    # Sometimes if the board_config.h file changes it can mess
-                    # with dependencies, and we get:
-                    # make: *** No rule to make target `include/autoconf.mk',
-                    #     needed by `depend'.
-                    do_config = True
-                    force_build = True
-                else:
-                    force_build = False
-                    if self.builder.force_config_on_failure:
-                        if failed:
-                            do_config = True
-                    result.commit_upto = commit_upto
-                    if result.return_code < 0:
-                        raise ValueError('Interrupt')
-
-                # We have the build results, so output the result
-                self._WriteResult(result, job.keep_outputs)
-                self.builder.out_queue.put(result)
-        else:
-            # Just build the currently checked-out build
-            result, request_config = self.RunCommit(None, brd, work_dir, True,
-                        True, self.builder.force_build_failures)
-            result.commit_upto = 0
-            self._WriteResult(result, job.keep_outputs)
-            self.builder.out_queue.put(result)
-
-    def run(self):
-        """Our thread's run function
-
-        This thread picks a job from the queue, runs it, and then goes to the
-        next job.
-        """
-        alive = True
-        while True:
-            job = self.builder.queue.get()
-            if self.builder.active and alive:
-                self.RunJob(job)
-            '''
-            try:
-                if self.builder.active and alive:
-                    self.RunJob(job)
-            except Exception as err:
-                alive = False
-                print err
-            '''
-            self.builder.queue.task_done()
-
-
 class Builder:
     """Class for building U-Boot for a particular commit.
 
@@ -639,13 +216,13 @@ class Builder:
         self.queue = Queue.Queue()
         self.out_queue = Queue.Queue()
         for i in range(self.num_threads):
-            t = BuilderThread(self, i)
+            t = builderthread.BuilderThread(self, i)
             t.setDaemon(True)
             t.start()
             self.threads.append(t)
 
         self.last_line_len = 0
-        t = ResultThread(self)
+        t = builderthread.ResultThread(self)
         t.setDaemon(True)
         t.start()
         self.threads.append(t)
@@ -1385,7 +962,7 @@ class Builder:
         for self.commit_upto in range(self.commit_count):
             self.SelectCommit(commits[self.commit_upto])
             self.SelectOutputDir()
-            Mkdir(self.output_dir)
+            builderthread.Mkdir(self.output_dir)
 
             self.BuildBoardsForCommit(board_selected, keep_outputs)
             board_dict, err_lines = self.GetResultSummary()
@@ -1413,7 +990,7 @@ class Builder:
             setup_git: True to set up a git repo clone
         """
         thread_dir = self.GetThreadDir(thread_num)
-        Mkdir(thread_dir)
+        builderthread.Mkdir(thread_dir)
         git_dir = os.path.join(thread_dir, '.git')
 
         # Clone the repo if it doesn't already exist
@@ -1436,7 +1013,7 @@ class Builder:
             max_threads: Maximum number of threads we expect to need.
             setup_git: True to set up a git repo clone
         """
-        Mkdir(self._working_dir)
+        builderthread.Mkdir(self._working_dir)
         for thread in range(max_threads):
             self._PrepareThread(thread, setup_git)
 
@@ -1469,7 +1046,7 @@ class Builder:
         self.commits = commits
 
         self.ResetResultSummary(board_selected)
-        Mkdir(self.base_dir)
+        builderthread.Mkdir(self.base_dir)
         self._PrepareWorkingSpace(min(self.num_threads, len(board_selected)),
                 commits is not None)
         self._PrepareOutputSpace()
@@ -1478,7 +1055,7 @@ class Builder:
 
         # Create jobs to build all commits for each board
         for brd in board_selected.itervalues():
-            job = BuilderJob()
+            job = builderthread.BuilderJob()
             job.board = brd
             job.commits = commits
             job.keep_outputs = keep_outputs
diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py
new file mode 100644
index 0000000..32297e2
--- /dev/null
+++ b/tools/buildman/builderthread.py
@@ -0,0 +1,434 @@
+# Copyright (c) 2014 Google, Inc
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+import errno
+import glob
+import os
+import shutil
+import threading
+
+import command
+import gitutil
+
+def Mkdir(dirname):
+    """Make a directory if it doesn't already exist.
+
+    Args:
+        dirname: Directory to create
+    """
+    try:
+        os.mkdir(dirname)
+    except OSError as err:
+        if err.errno == errno.EEXIST:
+            pass
+        else:
+            raise
+
+class BuilderJob:
+    """Holds information about a job to be performed by a thread
+
+    Members:
+        board: Board object to build
+        commits: List of commit options to build.
+    """
+    def __init__(self):
+        self.board = None
+        self.commits = []
+
+
+class ResultThread(threading.Thread):
+    """This thread processes results from builder threads.
+
+    It simply passes the results on to the builder. There is only one
+    result thread, and this helps to serialise the build output.
+    """
+    def __init__(self, builder):
+        """Set up a new result thread
+
+        Args:
+            builder: Builder which will be sent each result
+        """
+        threading.Thread.__init__(self)
+        self.builder = builder
+
+    def run(self):
+        """Called to start up the result thread.
+
+        We collect the next result job and pass it on to the build.
+        """
+        while True:
+            result = self.builder.out_queue.get()
+            self.builder.ProcessResult(result)
+            self.builder.out_queue.task_done()
+
+
+class BuilderThread(threading.Thread):
+    """This thread builds U-Boot for a particular board.
+
+    An input queue provides each new job. We run 'make' to build U-Boot
+    and then pass the results on to the output queue.
+
+    Members:
+        builder: The builder which contains information we might need
+        thread_num: Our thread number (0-n-1), used to decide on a
+                temporary directory
+    """
+    def __init__(self, builder, thread_num):
+        """Set up a new builder thread"""
+        threading.Thread.__init__(self)
+        self.builder = builder
+        self.thread_num = thread_num
+
+    def Make(self, commit, brd, stage, cwd, *args, **kwargs):
+        """Run 'make' on a particular commit and board.
+
+        The source code will already be checked out, so the 'commit'
+        argument is only for information.
+
+        Args:
+            commit: Commit object that is being built
+            brd: Board object that is being built
+            stage: Stage of the build. Valid stages are:
+                        distclean - can be called to clean source
+                        config - called to configure for a board
+                        build - the main make invocation - it does the build
+            args: A list of arguments to pass to 'make'
+            kwargs: A list of keyword arguments to pass to command.RunPipe()
+
+        Returns:
+            CommandResult object
+        """
+        return self.builder.do_make(commit, brd, stage, cwd, *args,
+                **kwargs)
+
+    def RunCommit(self, commit_upto, brd, work_dir, do_config, force_build,
+                  force_build_failures):
+        """Build a particular commit.
+
+        If the build is already done, and we are not forcing a build, we skip
+        the build and just return the previously-saved results.
+
+        Args:
+            commit_upto: Commit number to build (0...n-1)
+            brd: Board object to build
+            work_dir: Directory to which the source will be checked out
+            do_config: True to run a make <board>_defconfig on the source
+            force_build: Force a build even if one was previously done
+            force_build_failures: Force a bulid if the previous result showed
+                failure
+
+        Returns:
+            tuple containing:
+                - CommandResult object containing the results of the build
+                - boolean indicating whether 'make config' is still needed
+        """
+        # Create a default result - it will be overwritte by the call to
+        # self.Make() below, in the event that we do a build.
+        result = command.CommandResult()
+        result.return_code = 0
+        if self.builder.in_tree:
+            out_dir = work_dir
+        else:
+            out_dir = os.path.join(work_dir, 'build')
+
+        # Check if the job was already completed last time
+        done_file = self.builder.GetDoneFile(commit_upto, brd.target)
+        result.already_done = os.path.exists(done_file)
+        will_build = (force_build or force_build_failures or
+            not result.already_done)
+        if result.already_done and will_build:
+            # Get the return code from that build and use it
+            with open(done_file, 'r') as fd:
+                result.return_code = int(fd.readline())
+            err_file = self.builder.GetErrFile(commit_upto, brd.target)
+            if os.path.exists(err_file) and os.stat(err_file).st_size:
+                result.stderr = 'bad'
+            elif not force_build:
+                # The build passed, so no need to build it again
+                will_build = False
+
+        if will_build:
+            # We are going to have to build it. First, get a toolchain
+            if not self.toolchain:
+                try:
+                    self.toolchain = self.builder.toolchains.Select(brd.arch)
+                except ValueError as err:
+                    result.return_code = 10
+                    result.stdout = ''
+                    result.stderr = str(err)
+                    # TODO(sjg at chromium.org): This gets swallowed, but needs
+                    # to be reported.
+
+            if self.toolchain:
+                # Checkout the right commit
+                if self.builder.commits:
+                    commit = self.builder.commits[commit_upto]
+                    if self.builder.checkout:
+                        git_dir = os.path.join(work_dir, '.git')
+                        gitutil.Checkout(commit.hash, git_dir, work_dir,
+                                         force=True)
+                else:
+                    commit = 'current'
+
+                # Set up the environment and command line
+                env = self.toolchain.MakeEnvironment()
+                Mkdir(out_dir)
+                args = []
+                cwd = work_dir
+                if not self.builder.in_tree:
+                    if commit_upto is None:
+                        # In this case we are building in the original source
+                        # directory (i.e. the current directory where buildman
+                        # is invoked. The output directory is set to this
+                        # thread's selected work directory.
+                        #
+                        # Symlinks can confuse U-Boot's Makefile since
+                        # we may use '..' in our path, so remove them.
+                        work_dir = os.path.realpath(work_dir)
+                        args.append('O=%s/build' % work_dir)
+                        cwd = None
+                    else:
+                        args.append('O=build')
+                args.append('-s')
+                if self.builder.num_jobs is not None:
+                    args.extend(['-j', str(self.builder.num_jobs)])
+                config_args = ['%s_defconfig' % brd.target]
+                config_out = ''
+                args.extend(self.builder.toolchains.GetMakeArguments(brd))
+
+                # If we need to reconfigure, do that now
+                if do_config:
+                    result = self.Make(commit, brd, 'distclean', cwd,
+                            'distclean', *args, env=env)
+                    result = self.Make(commit, brd, 'config', cwd,
+                            *(args + config_args), env=env)
+                    config_out = result.combined
+                    do_config = False   # No need to configure next time
+                if result.return_code == 0:
+                    result = self.Make(commit, brd, 'build', cwd, *args,
+                            env=env)
+                    result.stdout = config_out + result.stdout
+            else:
+                result.return_code = 1
+                result.stderr = 'No tool chain for %s\n' % brd.arch
+            result.already_done = False
+
+        result.toolchain = self.toolchain
+        result.brd = brd
+        result.commit_upto = commit_upto
+        result.out_dir = out_dir
+        return result, do_config
+
+    def _WriteResult(self, result, keep_outputs):
+        """Write a built result to the output directory.
+
+        Args:
+            result: CommandResult object containing result to write
+            keep_outputs: True to store the output binaries, False
+                to delete them
+        """
+        # Fatal error
+        if result.return_code < 0:
+            return
+
+        # Aborted?
+        if result.stderr and 'No child processes' in result.stderr:
+            return
+
+        if result.already_done:
+            return
+
+        # Write the output and stderr
+        output_dir = self.builder._GetOutputDir(result.commit_upto)
+        Mkdir(output_dir)
+        build_dir = self.builder.GetBuildDir(result.commit_upto,
+                result.brd.target)
+        Mkdir(build_dir)
+
+        outfile = os.path.join(build_dir, 'log')
+        with open(outfile, 'w') as fd:
+            if result.stdout:
+                fd.write(result.stdout)
+
+        errfile = self.builder.GetErrFile(result.commit_upto,
+                result.brd.target)
+        if result.stderr:
+            with open(errfile, 'w') as fd:
+                fd.write(result.stderr)
+        elif os.path.exists(errfile):
+            os.remove(errfile)
+
+        if result.toolchain:
+            # Write the build result and toolchain information.
+            done_file = self.builder.GetDoneFile(result.commit_upto,
+                    result.brd.target)
+            with open(done_file, 'w') as fd:
+                fd.write('%s' % result.return_code)
+            with open(os.path.join(build_dir, 'toolchain'), 'w') as fd:
+                print >>fd, 'gcc', result.toolchain.gcc
+                print >>fd, 'path', result.toolchain.path
+                print >>fd, 'cross', result.toolchain.cross
+                print >>fd, 'arch', result.toolchain.arch
+                fd.write('%s' % result.return_code)
+
+            with open(os.path.join(build_dir, 'toolchain'), 'w') as fd:
+                print >>fd, 'gcc', result.toolchain.gcc
+                print >>fd, 'path', result.toolchain.path
+
+            # Write out the image and function size information and an objdump
+            env = result.toolchain.MakeEnvironment()
+            lines = []
+            for fname in ['u-boot', 'spl/u-boot-spl']:
+                cmd = ['%snm' % self.toolchain.cross, '--size-sort', fname]
+                nm_result = command.RunPipe([cmd], capture=True,
+                        capture_stderr=True, cwd=result.out_dir,
+                        raise_on_error=False, env=env)
+                if nm_result.stdout:
+                    nm = self.builder.GetFuncSizesFile(result.commit_upto,
+                                    result.brd.target, fname)
+                    with open(nm, 'w') as fd:
+                        print >>fd, nm_result.stdout,
+
+                cmd = ['%sobjdump' % self.toolchain.cross, '-h', fname]
+                dump_result = command.RunPipe([cmd], capture=True,
+                        capture_stderr=True, cwd=result.out_dir,
+                        raise_on_error=False, env=env)
+                rodata_size = ''
+                if dump_result.stdout:
+                    objdump = self.builder.GetObjdumpFile(result.commit_upto,
+                                    result.brd.target, fname)
+                    with open(objdump, 'w') as fd:
+                        print >>fd, dump_result.stdout,
+                    for line in dump_result.stdout.splitlines():
+                        fields = line.split()
+                        if len(fields) > 5 and fields[1] == '.rodata':
+                            rodata_size = fields[2]
+
+                cmd = ['%ssize' % self.toolchain.cross, fname]
+                size_result = command.RunPipe([cmd], capture=True,
+                        capture_stderr=True, cwd=result.out_dir,
+                        raise_on_error=False, env=env)
+                if size_result.stdout:
+                    lines.append(size_result.stdout.splitlines()[1] + ' ' +
+                                 rodata_size)
+
+            # Write out the image sizes file. This is similar to the output
+            # of binutil's 'size' utility, but it omits the header line and
+            # adds an additional hex value at the end of each line for the
+            # rodata size
+            if len(lines):
+                sizes = self.builder.GetSizesFile(result.commit_upto,
+                                result.brd.target)
+                with open(sizes, 'w') as fd:
+                    print >>fd, '\n'.join(lines)
+
+        # Now write the actual build output
+        if keep_outputs:
+            patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map',
+                        'include/autoconf.mk', 'spl/u-boot-spl',
+                        'spl/u-boot-spl.bin']
+            for pattern in patterns:
+                file_list = glob.glob(os.path.join(result.out_dir, pattern))
+                for fname in file_list:
+                    shutil.copy(fname, build_dir)
+
+
+    def RunJob(self, job):
+        """Run a single job
+
+        A job consists of a building a list of commits for a particular board.
+
+        Args:
+            job: Job to build
+        """
+        brd = job.board
+        work_dir = self.builder.GetThreadDir(self.thread_num)
+        self.toolchain = None
+        if job.commits:
+            # Run 'make board_defconfig' on the first commit
+            do_config = True
+            commit_upto  = 0
+            force_build = False
+            for commit_upto in range(0, len(job.commits), job.step):
+                result, request_config = self.RunCommit(commit_upto, brd,
+                        work_dir, do_config,
+                        force_build or self.builder.force_build,
+                        self.builder.force_build_failures)
+                failed = result.return_code or result.stderr
+                did_config = do_config
+                if failed and not do_config:
+                    # If our incremental build failed, try building again
+                    # with a reconfig.
+                    if self.builder.force_config_on_failure:
+                        result, request_config = self.RunCommit(commit_upto,
+                            brd, work_dir, True, True, False)
+                        did_config = True
+                if not self.builder.force_reconfig:
+                    do_config = request_config
+
+                # If we built that commit, then config is done. But if we got
+                # an warning, reconfig next time to force it to build the same
+                # files that created warnings this time. Otherwise an
+                # incremental build may not build the same file, and we will
+                # think that the warning has gone away.
+                # We could avoid this by using -Werror everywhere...
+                # For errors, the problem doesn't happen, since presumably
+                # the build stopped and didn't generate output, so will retry
+                # that file next time. So we could detect warnings and deal
+                # with them specially here. For now, we just reconfigure if
+                # anything goes work.
+                # Of course this is substantially slower if there are build
+                # errors/warnings (e.g. 2-3x slower even if only 10% of builds
+                # have problems).
+                if (failed and not result.already_done and not did_config and
+                        self.builder.force_config_on_failure):
+                    # If this build failed, try the next one with a
+                    # reconfigure.
+                    # Sometimes if the board_config.h file changes it can mess
+                    # with dependencies, and we get:
+                    # make: *** No rule to make target `include/autoconf.mk',
+                    #     needed by `depend'.
+                    do_config = True
+                    force_build = True
+                else:
+                    force_build = False
+                    if self.builder.force_config_on_failure:
+                        if failed:
+                            do_config = True
+                    result.commit_upto = commit_upto
+                    if result.return_code < 0:
+                        raise ValueError('Interrupt')
+
+                # We have the build results, so output the result
+                self._WriteResult(result, job.keep_outputs)
+                self.builder.out_queue.put(result)
+        else:
+            # Just build the currently checked-out build
+            result, request_config = self.RunCommit(None, brd, work_dir, True,
+                        True, self.builder.force_build_failures)
+            result.commit_upto = 0
+            self._WriteResult(result, job.keep_outputs)
+            self.builder.out_queue.put(result)
+
+    def run(self):
+        """Our thread's run function
+
+        This thread picks a job from the queue, runs it, and then goes to the
+        next job.
+        """
+        alive = True
+        while True:
+            job = self.builder.queue.get()
+            if self.builder.active and alive:
+                self.RunJob(job)
+            '''
+            try:
+                if self.builder.active and alive:
+                    self.RunJob(job)
+            except Exception as err:
+                alive = False
+                print err
+            '''
+            self.builder.queue.task_done()
-- 
2.0.0.526.g5318336



More information about the U-Boot mailing list