[U-Boot] [PATCH V2 00/18] Introduce cm-fx6 board (partial V2 cont.)

[Nikita Kiryanov]

This partial V2 completes the previous partial V2. It contains some final
preparational steps, and the introduction of cm-fx6 board.

Changes in V2:
	- Update commit message of "arm: mx6: ddr: configure MMDC for slow_pd"
	- Remove unnecessary line removal from arch/arm/cpu/armv7/mx6/ddr.c
	- Move probe_mmdc_config() code straight to dram_init()
	- Use imx6_spl.h
	- Use imx_ddr_size()
	  NOTE: the correction of this patch now depends on https://patchwork.ozlabs.org/patch/376095/

Cc: Igor Grinberg <grinberg at compulab.co.il>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Tim Harvey <tharvey at gateworks.com>

Nikita Kiryanov (9):
  arm: mx6: ddr: configure MMDC for slow_pd
  arm: mx6: ddr: fix cs0_end calculation
  arm: mx6: add support for Compulab cm-fx6 CoM
  arm: mx6: cm_fx6: add nand support
  arm: mx6: cm_fx6: add ethernet support
  arm: mx6: cm_fx6: add usb support
  arm: mx6: cm_fx6: add i2c support
  arm: mx6: cm_fx6: use eeprom
  arm: mx6: cm_fx6: add sata support

 arch/arm/cpu/armv7/mx6/ddr.c       |   5 +-
 board/compulab/cm_fx6/Makefile     |  12 +
 board/compulab/cm_fx6/cm_fx6.c     | 466 +++++++++++++++++++++++++++++++++++++
 board/compulab/cm_fx6/common.c     |  83 +++++++
 board/compulab/cm_fx6/common.h     |  53 +++++
 board/compulab/cm_fx6/imximage.cfg |   8 +
 board/compulab/cm_fx6/spl.c        | 409 ++++++++++++++++++++++++++++++++
 boards.cfg                         |   2 +
 include/configs/cm_fx6.h           | 295 +++++++++++++++++++++++
 9 files changed, 1330 insertions(+), 3 deletions(-)
 create mode 100644 board/compulab/cm_fx6/Makefile
 create mode 100644 board/compulab/cm_fx6/cm_fx6.c
 create mode 100644 board/compulab/cm_fx6/common.c
 create mode 100644 board/compulab/cm_fx6/common.h
 create mode 100644 board/compulab/cm_fx6/imximage.cfg
 create mode 100644 board/compulab/cm_fx6/spl.c
 create mode 100644 include/configs/cm_fx6.h

-- 
1.9.1